About Anhui Lujiang Huayi Rubber Products Co., Ltd. - Gaskets Supplier in China

China is the origin of Anhui Lujiang Huayi Rubber Products Co., Ltd., which currently lists 17 active products. All entries are EPDM gaskets identified by diameter nominal (DN) values ranging from 100 mm to 1 200 mm. The product titles repeatedly cite the Tyton compound, the KTW W270 design, and compliance markings such as WRAS and ACS. The catalogue distinguishes between “sit” and plain gasket variants, indicating different installation or surface‑contact configurations. Each listing follows a uniform naming pattern that combines material, size, and certification references.

The supplier’s catalogue is limited to gasket products, with no other rubber components reported. The DN designations correspond to the inside bore diameter, while the “KTW W270” label aligns with a standard gasket profile used in water‑treatment and chemical‑process piping. The inclusion of WRAS suggests suitability for potable‑water applications in regions that recognise the Water Regulations Advisory Scheme. ACS notation points to compliance with certain American chemical‑safety standards, although no additional certifications are documented.

Product Range and Specialties of Anhui Lujiang Huayi Rubber Products Co., Ltd.

The listed EPDM gaskets are manufactured from ethylene‑propylene‑diene monomer rubber, a material valued for heat, ozone and chemical resistance. In the gasket market, EPDM products are commonly supplied in Shore A hardness grades between 60 and 80, with compression‑set values below 30 % after 24 hours at 70 °C. Typical specifications for the KTW W270 profile include a thickness of 6 mm to 12 mm and a standard flange width of 30 mm, but variations exist for reinforced or metal‑core versions. Buyers usually verify compliance with WRAS (Water Regulations Advisory Scheme) for drinking‑water use and with ACS or equivalent chemical‑safety standards for industrial applications.

Trade and Export Information - Anhui Lujiang Huayi Rubber Products Co., Ltd.

China is a major exporter of rubber sealing components, and EPDM gaskets fall under HS chapter 40, most frequently reported with HS code 4016 (or 4016.90 for other vulcanised rubber articles). Export shipments are routinely loaded in 20‑ft or 40‑ft containers on wooden pallets, with standard incoterms such as FOB Shanghai or CIF Europe. Importers in the European Union, North America and the Middle East typically require REACH registration and, where applicable, RoHS compliance for rubber articles that may contact water. Chinese gasket manufacturers often hold ISO 9001 quality‑management certification, but buyers should request the specific certificates relevant to EPDM sealing products.

Sourcing from Anhui Lujiang Huayi Rubber Products Co., Ltd. - Buyer Guidance

When sourcing these EPDM gaskets, request a material data sheet that confirms the Tyton compound formulation, Shore A hardness, temperature range (commonly - 50 °C to +150 °C) and compression‑set performance. Ask for test reports that demonstrate compliance with WRAS and ACS markings, as well as any ISO or REACH documentation the supplier can provide. Verify the exact DN size, flange dimensions and whether the “sit” version includes a surface‑treatment or metal insert, and confirm the packaging method (e.g., bulk pallets or individual crate) before finalising the order.

What gasket sizes are offered by Anhui Lujiang Huayi Rubber Products?

The catalogue lists DN values from 100 mm up to 1 200 mm, covering a broad range of bore diameters for water‑ and chemical‑process pipelines.

What material is used for the gaskets?

All gaskets are made from EPDM (ethylene‑propylene‑diene monomer) rubber, a compound known for its resistance to heat, ozone and many chemicals.

Which standards do the gaskets comply with?

Product titles reference the KTW W270 profile and include WRAS certification for potable‑water use and ACS for chemical‑safety compliance.

Are any certifications available from the supplier?

The facts do not list specific certifications; buyers should request ISO 9001, REACH registration or any other relevant certificates before purchase.

What is the typical packaging for export shipments?

Gaskets are usually packed on wooden pallets, loaded into standard 20‑ft or 40‑ft containers, and shipped under FOB or CIF terms depending on the buyer’s preference.

What documentation should a buyer request?

Material safety data sheet, hardness and compression‑set test reports, WRAS and ACS compliance certificates, and any applicable ISO or REACH documents are standard requests.

What are common lead times for these gaskets?

Lead times vary by size and order volume, but Chinese EPDM gasket manufacturers often quote 2‑4 weeks for standard DN ranges once specifications are confirmed.