About Alpha Emirates LLC - Plastic Raw Materials Supplier in United Arab Emirates

Alpha Emirates LLC is based in the United Arab Emirates and currently lists 18 distinct plastic raw‑material products. The catalogue is limited to polymer granules, specifically polypropylene (PP), low‑density polyethylene (LDPE), high‑density polyethylene (HDPE) and linear low‑density polyethylene (LLDPE). Each material is offered in a range of colors - green, black, yellow, blue and natural - and the list includes both virgin and recycled grades. The product titles such as “PP Green Granules” or “LLDPE Natural Recycled Granules” identify the polymer type, colour and whether the material is recycled, matching the standard HS‑2‑digit chapter 39 for plastics.

The supplier’s catalogue does not provide HS‑code numbers, but the granules fall under HS sub‑heading 3902 for polymers in primary forms. Alpha Emirates LLC’s offerings cover a full spectrum of colour‑masterbatches and recycled content levels that are typical for downstream manufacturers of packaging, films and extrusion profiles. By presenting both virgin and recycled variants, the list supports buyers looking for cost‑effective raw material inputs while maintaining material‑specific specifications.

Product Range and Specialties of Alpha Emirates LLC

The listed products comprise PP, LDPE, HDPE and LLDPE granules in virgin and recycled forms. In the industry, virgin PP granules are commonly supplied with melt flow index (MFI) values between 2 and 20 g/10 min, density around 0.905 - 0.910 g/cm³, and melt temperature 220 - 240 °C. LDPE grades usually show MFI 0.5 - 10 g/10 min, density 0.910 - 0.925 g/cm³ and melt temperature 110 - 130 °C; HDPE grades often have MFI 0.2 - 5 g/10 min, density 0.941 - 0.965 g/cm³ and melt temperature 130 - 150 °C; LLDPE grades typically present MFI 0.5 - 15 g/10 min and density 0.915 - 0.925 g/cm³. Recycled granules are graded by percentage of reclaimed polymer, usually 30 % - 80 % recycled content, and must meet comparable MFI and density tolerances to ensure processing consistency. Colour variants are achieved through masterbatch dosing, with standard colour‑fastness tests (ASTM D523) applied to verify hue stability.

Trade and Export Information - Alpha Emirates LLC

The United Arab Emirates is a regional hub for polymer exports, leveraging its ports in Jebel Ali and Khalifa for shipments to Asia, Europe and North America. Plastic granules generally use HS Chapter 39, sub‑heading 3902, and are subject to customs inspections that verify material classification and any hazardous additives. Buyers typically require certificates such as ISO 9001 for quality management, ISO 14001 for environmental compliance, and REACH registration for substances of concern; food‑contact applications further demand FDA or EU Regulation 1935/2004 compliance. Standard export packaging includes 25 kg bulk polypropylene bags or 1‑ton woven sacks, with a 20‑foot container holding roughly 20 tons and a 40‑foot container about 38 tons of granules. Common Incoterms used by UAE exporters are FOB Dubai Port or CIF for major markets, allowing buyers to plan logistics and insurance accordingly.

Sourcing from Alpha Emirates LLC - Buyer Guidance

When sourcing from Alpha Emirates LLC, buyers should request a material safety data sheet (MSDS), a test report covering melt flow index, density, melt temperature and colour consistency, and a recycled‑content analysis for any reclaimed grades. Confirmation of REACH compliance and, where relevant, FDA or EU food‑contact certifications should be obtained before contract finalisation. Verify packaging details (bag type, weight, moisture content) and ask for a small‑scale sample - typically 5 kg - to run in‑house validation; lead times are usually 4 - 6 weeks, and minimum order quantities range from 10 to 20 metric tons depending on the polymer and colour.

What polymer types does Alpha Emirates LLC supply?

The supplier lists granules of polypropylene (PP), low‑density polyethylene (LDPE), high‑density polyethylene (HDPE) and linear low‑density polyethylene (LLDPE), each offered in virgin and recycled forms with colour options such as green, black, yellow, blue and natural.

Are the recycled granules certified for a specific recycled content?

Recycled grades are typically accompanied by a third‑party analysis stating the percentage of reclaimed polymer; buyers should request this certificate together with the standard material test report.

Which HS code applies to the listed polymer granules?

Plastic granules in primary form are classified under HS Chapter 39, sub‑heading 3902, which covers polymers of ethylene, propylene and other olefins.

What certifications should a buyer request for these polymer products?

Commonly required documents include ISO 9001 quality‑management certification, ISO 14001 environmental compliance, REACH registration, and, for food‑contact applications, FDA or EU Regulation 1935/2004 approval.

How are the granules packaged for export?

Typical packaging is 25 kg bulk polypropylene bags or 1‑ton woven sacks; a 20‑foot container can accommodate about 20 tons and a 40‑foot container about 38 tons of granules.

What is the usual lead time and minimum order quantity for virgin granules?

Lead times are generally 4‑6 weeks from order confirmation, with minimum orders ranging from 10 to 20 metric tons depending on the specific polymer grade and colour.

What quality parameters should be verified before purchase?

Buyers should check melt flow index (MFI), density, melt temperature range, colour consistency (ASTM D523), moisture content (<0.1 %), and, for recycled grades, the verified recycled‑content percentage.

How can a buyer obtain a sample for testing?

Alpha Emirates LLC can provide a 5 kg sample of the requested grade and colour; the sample is shipped in a sealed bag and includes the accompanying test report and MSDS for evaluation.