About Allotech Industrial Co., Ltd - Agriculture Supplier in China

Allotech Industrial Co., Ltd is based in China and currently lists five active products in its catalogue. The company’s catalogue includes a soft and annealed rolled C1100 copper foil, a 1.6 mm Tafa 95mxc Fecrbsi thermal spray wire, a 1/16 inch amorphous alloy Vecalloy B cored wire, a Nife55 cast iron wire for MIG applications, and a Cual9fe Cual8 aluminum‑bronze welding wire. Each item is recorded under the broad Agriculture category, reflecting the supplier’s classification in the source data. The product list combines copper, alloy, and iron based materials that are commonly processed for industrial applications, and the catalogue does not provide HS‑code identifiers for any of the items.

The listed copper foil is described as soft and annealed, indicating a high degree of ductility suitable for flexible circuit or heat‑exchange uses. The thermal spray wire and the amorphous alloy cored wire are positioned for coating and advanced material applications where precise alloy composition is critical. Cast iron MIG wire and aluminum‑bronze welding wire target foundry and joining processes, respectively. All five items are presented without explicit performance data, leaving buyers to request detailed specifications directly from the supplier.

Product Range and Specialties of Allotech Industrial Co., Ltd

The catalogue’s copper foil is a C1100 grade, which in the industry typically offers a minimum copper purity of 99.90 % and a conductivity near 100 % IACS. Common thicknesses for soft annealed foils range from 5 µm to 30 µm, and buyers usually verify tensile strength, elongation and surface roughness before acceptance. The 1.6 mm thermal spray wire described as Tafa 95mxc Fecrbsi is a high‑temperature alloy wire used in flame‑spraying; standard specifications include a melting point above 1 200 °C and a controlled alloy composition to achieve a specific coating hardness. The 1/16 inch amorphous alloy Vecalloy B cored wire is an amorphous metallic material often supplied in a cored form for additive manufacturing or precision winding, with typical magnetic permeability and corrosion‑resistance values defined by the alloy’s composition. Nife55 cast iron MIG wire is a nodular or gray‑cast iron wire used in metal‑inert‑gas welding; industry standards call for a carbon content around 3 - 4 % and a tensile strength of 350 - 450 MPa. The aluminum‑bronze welding wire (Cual9fe Cual8) usually conforms to Cu‑Al‑Fe alloy grades such as CuAl7Fe, offering a tensile strength of 500 - 600 MPa and good resistance to dezincification. Buyers should compare these typical grades with the supplier’s exact data to confirm suitability.

Trade and Export Information - Allotech Industrial Co., Ltd

China is a major exporter of copper foils, specialty alloy wires and welding consumables, with shipments frequently destined for Southeast Asia, the European Union and North America. Export logistics for metal wire products commonly involve 20‑ft or 40‑ft containers packed on wooden pallets, with protective wrapping to prevent moisture ingress. While the catalogue does not list HS codes, the relevant tariff chapters for copper foil (chapter 74), alloy wires (chapter 72) and iron‑based wires (chapter 71) are routinely inspected by customs authorities, and importers often require a commercial invoice, packing list and a material safety data sheet (MSDS). Typical certifications requested by overseas buyers include ISO 9001 quality management, ISO 14001 environmental management, CE marking for EU markets and RoHS compliance for copper products used in electronics. Chinese exporters also adhere to the China Compulsory Certification (CCC) system for certain metal products, although the supplier’s specific certifications are not disclosed in the provided facts.

Sourcing from Allotech Industrial Co., Ltd - Buyer Guidance

When sourcing any of the five listed items, buyers should request a full material test report that details chemical composition, mechanical properties (tensile strength, elongation) and dimensional tolerances. For the copper foil, a conductivity test (ICUMSA or IACS) and thickness measurement are standard verification steps. The thermal spray and amorphous alloy wires benefit from a micro‑structural analysis and a coating hardness profile, while the cast iron and aluminum‑bronze welding wires require weldability tests such as bead‑on‑plate and gas‑metal‑arc welding trials. Because the supplier’s certifications are not specified, buyers should ask for copies of ISO 9001, ISO 14001 or any other relevant certificates before committing to a purchase. Minimum order quantities are typically set per product line, often ranging from a single 20‑kg coil for copper foil to 500 kg batches for welding wires, and lead times in China can vary from two to six weeks depending on production scheduling.

What dimensions are available for the soft & annealed rolled C1100 copper foil?

The supplier lists the product but does not specify thickness or width. Buyers should request the exact foil thickness (e.g., 5‑30 µm) and width dimensions, as well as a conductivity test result, before placing an order.

Is the 1.6 mm Tafa 95mxc Fecrbsi thermal spray wire suitable for high‑temperature coating?

The product description indicates a 1.6 mm diameter thermal spray wire, which in the industry is used for temperatures above 1 200 °C. Confirm the alloy composition and melting point with the supplier and ask for a sample to verify sprayability.

What is the typical composition of the 1/16 inch amorphous alloy Vecalloy B cored wire?

Amorphous alloy wires are usually characterized by a glass‑forming alloy with high magnetic permeability. Request a chemical analysis and a magnetic property report to ensure the material matches the intended application.

Can the Nife55 cast iron MIG wire be used for both gray and nodular cast iron welding?

The catalogue names the product as cast iron wire for MIG, but does not state the specific grade. Ask the supplier for the carbon content, tensile strength and a weldability test report to determine suitability for gray or nodular cast iron welding.

What certifications should I verify for the aluminum‑bronze welding wire?

Typical buyers request ISO 9001, ISO 14001 and CE marking for welding consumables, plus a welding‑performance test report. Since the supplier’s certifications are not listed, request copies of any applicable certificates before finalizing the purchase.

How are the products packaged for international shipment?

Metal wires and foils are usually packed in moisture‑resistant bundles on wooden pallets, with inner layers of anti‑corrosion film. Confirm the exact packaging dimensions, weight per pallet and whether the supplier provides a packing list and MSDS.

What are the common Incoterms used for shipping these metal products from China?

Exporters of copper foils and alloy wires from China often use FOB (Free on Board) or CIF (Cost, Insurance, Freight) to major ports such as Shanghai or Shenzhen. Verify the preferred Incoterm with the supplier and ensure insurance coverage for the cargo value.

Is a sample available for each product before placing a bulk order?

The facts do not mention a sample policy. Buyers should ask the supplier to provide a small‑quantity sample, accompanied by the relevant test reports, to evaluate material properties prior to a larger purchase.