About Advance Recycling Technology - Plastic Raw Materials Supplier in United Arab Emirates

Based in the United Arab Emirates, Advance Recycling Technology lists five active products within the plastic raw materials segment. The catalogue comprises two polypropylene (PP) granule colors - light grey and black - alongside three high‑density polyethylene (HDPE) items: injection caps, natural resin, and white granules. All items are classified under the plastic polymer family and are intended for downstream processing such as molding, extrusion, or cap production. The supplier’s portfolio is limited to these five polymer forms, providing a focused selection for buyers seeking recycled PP or HDPE feedstock.

The five entries reflect both granule and finished‑part formats, allowing purchasers to source either bulk polymer pellets or ready‑to‑use injection‑molded caps. No additional product lines are listed, and the supplier does not disclose further specifications beyond the basic material type and color designation. Buyers can therefore evaluate each item against their own technical requirements such as melt flow index, moisture content, or food‑contact compliance.

Product Range and Specialties of Advance Recycling Technology

The catalogue offers PP Light Grey Granules, PP Black Granules, HDPE Natural, HDPE White Granules, and HDPE Injection Caps. Polypropylene granules are typically supplied in 25 kg bulk bags, with melt flow index (MFI) values ranging from 2 to 12 g/10 min (ISO 1133) depending on grade. Black and light‑grey colors are achieved through masterbatch pigments that meet ASTM D1903 color standards.

High‑density polyethylene grades are commonly provided as either natural (unpigmented) or white‑colored pellets, with density values around 0.945 g/cm³ and MFI 0.2 - 5 g/10 min. The injection caps are usually molded from HDPE resin, featuring wall thicknesses of 0.8 - 1.2 mm and snap‑fit designs suitable for PET bottles. Standard packaging for caps includes cartons of 1,000 units or bulk pallets, while granules are loaded into 20‑ft or 40‑ft containers.

Trade and Export Information - Advance Recycling Technology

The United Arab Emirates serves as a regional hub for plastic polymer exports, with most shipments destined for packaging manufacturers in Europe, automotive suppliers in South‑East Asia, and construction firms in Africa. Export logistics typically involve FOB Abu Dhabi or CIF Mediterranean ports, using 20‑ft or 40‑ft containers for granules and bulk pallets for caps. Buyers often require compliance with REACH registration for the EU market and ISO 9001 quality management certification, which many UAE plastic recyclers maintain.

Regulatory checks frequently include material safety data sheets (MSDS), melt flow index certificates, and, for food‑contact applications, FDA or EU No 10 / 2011 compliance documentation. Shipping is usually on a palletized basis with 1 tonne per pallet for granules, protected by polyethylene liners to control moisture. Inspection agencies such as SGS or Bureau Veritas commonly perform pre‑shipment sampling under the relevant HS chapters (3901 for polyethylene, 3902 for polypropylene).

Sourcing from Advance Recycling Technology - Buyer Guidance

When sourcing from Advance Recycling Technology, buyers should request the latest MFI test report, density measurement, and color masterbatch specification for each granule batch. For the injection caps, a dimensional drawing, wall‑thickness tolerance, and sample of the finished part are standard verification items. Confirm that the supplier can provide REACH registration numbers and, if required, FDA food‑contact certification before placing an order.

Typical minimum order quantities are 500 kg per grade for granules and 5,000 units for injection caps, with lead times of four to six weeks after receipt of a formal purchase order and approved samples. Verify that packaging meets the buyer’s storage conditions - e.g., moisture‑proof bags for granules and sturdy cartons for caps - and that the chosen Incoterm aligns with the buyer’s logistics plan.

What plastic polymer grades does Advance Recycling Technology offer?

The supplier lists polypropylene granules in light‑grey and black, and high‑density polyethylene in natural, white, and as injection‑molded caps. All grades are recycled polymer feedstock suitable for extrusion or molding.

Are material test reports available?

Buyers can request melt flow index (ISO 1133), density, and color masterbatch certificates for each batch; these reports are standard for PP and HDPE shipments.

Which certifications should a buyer verify?

Request REACH registration for EU deliveries, ISO 9001 quality management proof, and, if the end product is food‑contact, FDA or EU No 10/2011 compliance documentation.

What are the typical packaging formats?

Granules are normally packed in 25 kg bulk bags placed on pallets, while injection caps are shipped in cartons of 1,000 units or on bulk pallets, all loaded into 20‑ft or 40‑ft containers.

What are the common minimum order quantities and lead times?

Standard MOQs are 500 kg per granule grade and 5,000 caps, with production and preparation lead times of four to six weeks after order confirmation.

Which HS code chapters apply to these products?

Polypropylene falls under HS Chapter 3902 and high‑density polyethylene under HS Chapter 3901; buyers should reference these codes for customs declarations.

How are shipments typically arranged?

Export shipments are usually offered on FOB Abu Dhabi or CIF Mediterranean terms, using ocean freight containers; buyers can specify pallet‑level loading and moisture‑proof liners.

Can samples be obtained before a full order?

Yes, the supplier can provide small sample bags of each granule type and a few injection caps for quality evaluation, subject to a nominal handling fee.