Import Hydraulic Directional Control Valve 2drops/Min — Buy in Bulk from Supplier in China

The hydraulic directional control valve with internal leakage of 2drops/min makes AAK have no peers Oliver comes from a hydraulic equipment company in Canada. At the end of last year, they planned to develop a hydraulic cylinder that uses a hydraulic directional control valve. The parameter requirements are high, especially the internal leakage should be less than 2drops/min. Oliver inquired about more than 10 manufacturers of hydraulic directional control valves. Only one supplier who had cooperated for 5 years told him that he was 90% sure. Other manufacturers surrendered. One month later, the hydraulic directional control valve was installed with the oil cylinder. Less than 12 hours after startup, the hydraulic oil cylinder was unstable during reciprocating motion. After disassembly, the engineer found that the hydraulic directional control valve had internal leakage exceeding the requirement of 2 drops/min. Oliver was very helpless. He continued to look for new manufacturers of hydraulic directional control valves, and they all basically replied that they could not meet the requirement of internal leakage. Oliver found an article on Google, "The internal leakage index is equaled to the local manufacturer in Germany, but AAK hydraulic threaded cartridge valve has better cost performanceâ??, and left a message on our website: can you customize the hydraulic directional control valve with internal leakage of 2drops/min? At first glance, I knew that this was an accurate customer consultation. Although the internal leakage of 2drops/min was difficult, AAK had mass production 1 year ago. We suggested him send us the drawings and working condition requirements of the hydraulic directional control valve, and AAK can make samples directly. If the internal leakage of the hydraulic directional control valve does not meet the standard, 100% of the development cost will be returned. According to the development data provided by Oliver, there may not be any other manufacturer that can provide guarantee except AAK. After 30 days, AAK successfully sent 8 hydraulic directional control valve samples. Three months later, Oliver informed that no abnormality of the hydraulic directional control valve was found during the 3 internal commissioning of his company. After the hydraulic cylinder was tried out by the user, the feedback was also very good. Oliver is curious about the hydraulic directional control valves surrendered by so many manufacturers. Why did AAK samples succeed at one time? AAK hydraulic directional control valve has 3 absolute advantages and has already surpassed its domestic counterparts:

1. The precision honing machine imported from the United States is used to finish the valve hole and valve spool of the hydraulic direction control valves for more than 3 times. The dimensional accuracy of the valve hole is IT7 ~ 4, and the surface roughness can reach Ra 0.32 ~ 0.04�¼m, thus meeting the requirements of high accuracy.