Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The Aiweidy A-2380 is a 200 watt beam moving head built around a Philips MSD Platinum 5R or YODN 5R discharge lamp with 2200 hour rated life and 8000 K colour temperature. Pan movement covers 540 degrees and tilt 270 degrees, both with 16-bit resolution and electric correction, while the optical system employs mechanical focus with a beam angle of 0 degrees for tight pencil-beam effects. Control runs over 16 DMX512 channels, with mechanical dimming from 0-100 percent, strobe macro control, and an overheat protection circuit. Power draw is 350 watts across a 100-240 V, 50/202 Hz universal input, and the IP20-rated enclosure carries a net weight of 19.5 kg and gross weight of 21.5 kg.
The colour wheel carries 14 discrete colour chips on a single wheel, while the gobo assembly offers 17 gobos. Effects include a rotatable eight-facet prism, effect move and frost filter for beam softening. The front panel uses a dot matrix display with four tactile switches and a 180-degree rotating show orientation, allowing flexible rigging positions. The Philips MSD Platinum 5R lamp is an industry-standard source for this fixture class, though YODN compatibility offers a replacement path; buyers should confirm which lamp ships as standard and whether spare lamps are included or priced separately.
This fixture targets rental houses, touring productions, nightclubs and corporate event providers needing narrow-beam aerial effects with rapid movement and colour/gobo changes. The 0-degree beam angle suits haze-enhanced mid-air beam visibility rather than wash coverage. Buyers should verify whether flight cases, hanging hardware and powerCon or IEC cables are included, as these are not listed. The 350 W consumption figure includes lamp and motor draw; confirm with the supplier whether this is peak or average draw, as this affects power distribution planning for multi-unit rigs.
| Lamp type | Philips MSD Platinum 5R or YODN 5R (supplier-confirmed options) |
| Lamp life | 2200 hours (supplier-confirmed) |
| Colour temperature | 8000 K (supplier-confirmed) |
| DMX channels | 16 channels (supplier-confirmed) |
| Pan movement | 540° (16-bit, electric correction, supplier-confirmed) |
| Tilt movement | 270° (16-bit, electric correction, supplier-confirmed) |
| Beam angle | 0° (supplier-confirmed, mechanical focus) |
| Power consumption | 350 W (supplier-confirmed) |
| Input voltage | 100-240 V, 50/60 Hz (supplier-confirmed) |
| IP rating | IP20 (supplier-confirmed, indoor use only) |
| Net / gross weight | 19.5 / 21.5 kg (supplier-confirmed) |
| Typical beam fixture prism type | 8-facet rotating prism (standard for 5R beam class) |
Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. is located at No.3 Xinhenan Fifth Road, First Industrial Zone, Taihe Town, Baiyun District, Guangzhou 510540, Guangdong, China. The company holds an imported supplier tier with harbour trust classification. Response metrics show 0.00 percent response rate and zero average response hours, suggesting buyers should anticipate delayed replies and may need to pursue contact through multiple channels or a local agent in Guangzhou. No factory size, year of establishment, annual revenue or named client portfolio appears in the listing.
The address places the supplier in Baiyun District, a concentration zone for Guangzhou's stage lighting and pro-audio manufacturing cluster. The imported tier indicates the profile was established through non-organic means, which does not imply poor product quality but does reduce the information available about operational history. Buyers should conduct due diligence including business licence verification, factory inspection if possible, and reference checks with existing customers. The listing provides a specific product model (A-2380) with detailed mechanical and optical data, which is a positive signal of technical competence relative to generic catalog entries.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order, verify which lamp ships as standard, Philips or YODN, and confirm spare lamp availability, pricing and genuine sourcing, as counterfeit discharge lamps are common in the Guangzhou lighting market and significantly shorten replacement intervals. Request a demonstration video showing pan/tilt speed, strobe performance and colour/gobo change timing. Ask for the DMX channel assignment chart and personality file compatibility with MA Lighting, Avolites or your specific console. The 0.00 percent response rate means direct communication may be slow; consider engaging a Guangzhou-based sourcing agent for factory visit and pre-shipment inspection if order value justifies the cost.
Shipping a 19.5 kg moving head from Baiyun District, Guangzhou, typically departs via Yantian or Nansha port for sea freight, with transit to European or US west coast hubs taking 25-40 days depending on consolidation. Air freight is viable for urgent orders but cost-prohibitive for single units. Incoterms should be clarified, FOB Guangzhou being standard, though some suppliers quote EXW factory. Payment terms for first orders are typically 30 percent deposit, 70 percent before shipping, with letter of credit acceptable for larger quantities. Confirm whether the quoted price includes export carton, inner foam and flight case, or if these are additional. Lead time is not stated and must be confirmed, as 5R lamp supply fluctuations can extend delivery windows unpredictably.
Quality inspection on receipt should include a full DMX control test across all 16 channels, verifying pan/tilt end-stop calibration, home position accuracy, and absence of mechanical noise indicating gear wear. Run the fixture for 4-6 hours continuous to confirm thermal stability and that the overheat protection does not spuriously trigger. Measure actual power draw with a clamp meter to verify it aligns with the 350 W specification, excessive draw indicating lamp or ballast issues. Check all gobos for clean mounting and absence of thermal distortion, and verify colour wheel alignment at each indexed position. Document any discrepancies immediately for warranty claim; the supplier's warranty terms, duration and claim procedure are not listed and confirmmust be confirmed in writing before payment. Retain all customs documentation for spare parts sourcing, as 5R lamps and specific gobos may require exact matching to the shipped configuration.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
Securing a reliable supply chain for 5r 200 Watt Sharpy Beam Moving Head Light is critical for maintaining your business operations. Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd., a verified supplier located in China, provides high-quality 5r 200 Watt Sharpy Beam M ready for international export. By connecting directly with this supplier, buyers can bypass intermediaries, negotiate custom wholesale pricing, and arrange bulk shipments. This product is a key offering within the Light Emitting Diode industry, catering to distributors, wholesalers, and importers worldwide.
Navigating the complexities of global sourcing is easier when you have direct access to the right manufacturers and exporters. When importing 5r 200 Watt Sharpy Beam M from China, buyers can discuss shipping logistics, packaging requirements, and preferred payment terms directly with Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd.. This seamless communication is powered by EximNext, a premier global B2B marketplace that connects ambitious buyers with verified global sellers across every major industry.
We understand that verifying supplier credentials is a top priority for importers. Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. is part of our extensive network of vetted international exporters. Browse more products in the Light Emitting Diode category or discover new suppliers across the Light Emitting Diode sector. Expand your sourcing capabilities through our trusted import export marketplace — the import export marketplace built for serious international trade.
When importing 5r 200 Watt Sharpy Beam M from China, buyers should consider shipping terms (FOB, CIF, EXW), customs documentation requirements, and payment security. Contact the supplier to discuss the best logistics options for your destination country.
Click the "Request Quotation" button to contact Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. directly. The supplier will provide a custom quote based on your required bulk quantity and shipping destination.
Yes, Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. provides 5r 200 Watt Sharpy Beam M for bulk export from China. You can negotiate the MOQ, packaging details, and shipping terms directly with the supplier.
Shipping terms such as FOB, CIF, or EXW can be negotiated directly with Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd.. Contact the supplier to discuss the best logistics options for importing 5r 200 Watt Sharpy Beam M to your country.
Send a direct message to Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. through our platform to request a product sample before committing to a large wholesale order.
Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd. is a registered and verified supplier on EximNext. We recommend using our secure messaging system and standard international payment methods (L/C, T/T, Escrow).
Request a detailed product data sheet including grade, purity, dimensions, material composition, and applicable industry standards from Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd..
Many suppliers on EximNext, including Guangzhou Aiweidy Lighting Acoustics Equipment Co., Ltd., offer custom packaging and private label options for bulk wholesale orders.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services.
Yes, EximNext hosts a wide network of verified Light Emitting Diode manufacturers, exporters, and wholesalers across 200+ countries.
Click "Request Quotation" or "Contact Supplier" on this page. Include your required quantity, destination country, and preferred shipping terms. All communications are managed securely through our global B2B marketplace.
Discover more products in Light Emitting Diode from verified suppliers worldwide.