Import Aluminum Curtain Wall Ys-Curtain Wall-01 — Buy in wholesale FOB from Supplier in China

The YS-Curtain Wall-01 is an aluminum veneer curtain wall panel system fabricated from 3003-H24 alloy, a strain-hardened and partially annealed grade offering good formability and corrosion resistance for exterior architectural applications. Available thicknesses range from 1.5mm to 3.0mm according to the supplier's specification, with the H24 temper indicating approximately half-hard mechanical properties after processing. The panel structure comprises the facing sheet, integrally formed or separately attached stiffeners, and corner angle codes for mounting alignment. This stick-system or panelized approach allows field assembly on building sub-frames with adjustable brackets.

The 3003 alloy contains manganese as the primary alloying element, typically 1.0-1.5 percent, providing better corrosion resistance than 1xxx series pure aluminum while maintaining weldability and workability. The H24 temper delivers typical tensile strength of 215-275 MPa and yield strength of 145-195 MPa, with elongation around 8-10 percent. Panel stiffeners are welded or screw-fixed to the rear face, the source describes both methods, and the supplier should clarify which fabrication method applies to this specific product. For acoustic performance, the cavity can be filled with insulation batts, though the source does not specify the insulation type or its fire classification.

This curtain wall system targets commercial buildings, high-rise residential towers, and institutional projects where lightweight cladding and modern aesthetics are required. The 1.5mm to 3.0mm thickness range accommodates varying span conditions and wind load requirements, with thicker panels generally specified for higher buildings or larger module sizes. Buyers should request test data for air permeability, water tightness, and wind resistance performance according to relevant standards. The Guangdong location suggests proximity to raw material suppliers and finishing facilities, but buyers must independently verify the supplier's fabrication capacity, quality control procedures, and project references.

A&L Aluminium Co., Ltd. is located in Foshan, Guangdong Province, postal code 528231, within China's principal aluminum processing and building materials manufacturing region. The supplier holds a "harbor" trust classification with a 0.00 percent response rate and zero recorded average response hours, indicating no response history is available through this channel. The address is listed as Guangdong, Foshan, though the specific street or industrial zone is not provided in a fully structured format. Buyers should request the complete registered address and verify it against business registration records.

The company name suggests specialization in aluminum products, and the listing focuses on architectural veneer curtain wall panels rather than extrusion systems or complete facade packages. No information is provided about factory size, production capacity, number of employees, years in operation, annual turnover, export experience, or specific quality management certifications. The source description references international building standards but does not name specific standards or certifications held. Buyers should independently verify the company's manufacturing capabilities, request factory audit reports, and ask for project references with contactable clients in similar climates and building types to their own projects.