从China供应商批量进口5-Minute Clear Epoxy Ab Glue

This 5-minute clear epoxy AB glue is a rapid-curing two-part adhesive supplied by Ningbo Pioneer Adhesive Co., Ltd. from Zhejiang Province, China. The product cures at room temperature in approximately 5 minutes, making it suitable for production lines where clamping time must be minimised. It is supplied in a syringe format for metered dispensing, which helps control mix ratios and reduces material waste in batch or continuous assembly operations.

The adhesive bonds metal, wood, ceramics, and multiple plastic substrates, though specific plastic grades (notably polyolefins and fluoropolymers) require surface preparation or primer treatment. Typical epoxy formulations of this type contain a resin based on diglycidyl ether of bisphenol A (DGEBA) and a polyamide or amine-based hardener, with a standard mix ratio of 1:1 by volume for syringe-dispensed systems. The cured film offers chemical resistance to common solvents, dilute acids, and automotive fluids, though resistance to strong alkalis and prolonged water immersion should be confirmed with the supplier for this specific grade. Tensile lap-shear strength for generic 5-minute epoxies typically falls in the 10-15 MPa range on abraded aluminium; buyers should request the test method (ASTM D1002 or ISO 4587) and measured value for this product.

Primary buyers include automotive component manufacturers, electronics assembly houses, and construction fixings suppliers. The syringe packaging suits manual or bench-top pneumatic dispensing equipment. Buyers should confirm the exact viscosity at 25 degrees Celsius, shelf life from manufacture, and whether the formulation is RoHS-compliant for electronics applications. Incoterms and minimum order quantities must be discussed directly with Ningbo Pioneer Adhesive Co., Ltd., as must any requirement for batch certificates of analysis or MSDS documentation in languages other than English.

Ningbo Pioneer Adhesive Co., Ltd. is located at No.750, Chuangyuan Road, Hi-Tech Section, Ningbo, Zhejiang, China. The supplier is classified under the imported tier with a harbour trust designation. The company address places it within Ningbo's high-technology industrial zone, a region with established chemical and materials manufacturing infrastructure. There are no stated response metrics available for this supplier, with a recorded response rate of 0.00 percent and zero average response hours.

The supplier listing does not disclose founding date, facility size, annual turnover, employee count, or specific export markets served. No client references, factory audit results, or third-party certification details (ISO 9001, ISO 14001, or product-specific) are provided in the source material. Buyers should request a company profile, quality management system certificates, and references from comparable export accounts before committing to volume orders. Direct communication with the supplier is essential to verify production capacity, batch consistency protocols, and technical support availability.