About Zhongshan Yuekon Electrical Appliances Co., Ltd. - Electric Lamps, Tubes, Bulbs, Lights & Light Fittings Supplier in China

Zhongshan Yuekon Electrical Appliances Co., Ltd. is based in China and currently lists nine active products in its catalogue. The company is classified under the top categories "Electric Lamps, Tubes, Bulbs, Lights & Light Fittings" and "Energy Saving Bulbs", indicating a focus on lighting hardware rather than ancillary electrical components. Each product entry uses terminology such as LED down light, high‑brightness E27 bulb, 120‑degree LED bulb and COB downlighting, which are standard descriptors within the lighting sector. The catalogue does not provide HS codes, but the items fall into the HS‑code families for lamps and lighting equipment that are commonly used for LED and energy‑saving products.

The product list includes items such as "LED down light", "Top quality led downlights led", "E27 high brightness 24W indoor IP20 led bulb", "120 degree led bulb", "High lumen led bulb 5*1W", "Epistar SMD5630 led bulb", "18W Warm White LED Downlight", "4 inch COB led down lighting 10W" and a "20W stretchable design CE listed" model. These entries cover both recessed downlights and bulb‑type fixtures, with specifications that span wattages from 5 W to 24 W and various form factors such as COB chips and SMD packages. The inclusion of CE‑listed items suggests compliance with European safety directives for electrical equipment.

Product Range and Specialties of Zhongshan Yuekon Electrical Appliances Co., Ltd.

The catalogue’s LED downlights typically range from 5 W to 20 W, delivering lumen outputs between 400 lm and 2,200 lm, with colour temperatures commonly offered at 2700 K (warm white), 4000 K (neutral) and 6500 K (daylight). Industry standards for indoor fixtures often require an IP20 rating for dry indoor use, while higher IP44 or IP65 ratings are applied for moisture‑prone environments. COB (Chip‑on‑Board) modules such as the 4‑inch 10 W unit provide a high lumen density, usually exceeding 100 lm W⁻¹, whereas SMD5630 packages like the Epistar variant are known for precise colour rendering (CRI ≥ 80) and stable drive currents. Energy‑saving bulbs in this segment are frequently evaluated against IEC 62471 for photobiological safety and IEC 60598 for general lamp construction.

Typical specifications for the E27 base bulbs include a 24 W power rating, an IP20 enclosure, and a lumen output around 2,100 lm, giving an efficacy of roughly 87 lm W⁻¹. Warm‑white models often target a colour rendering index of 80‑85 and a correlated colour temperature of 3000 K, while high‑brightness variants may reach 5000 K. Buyers frequently request data sheets that list forward voltage, drive current, total harmonic distortion and thermal management details for each LED type.

Trade and Export Information - Zhongshan Yuekon Electrical Appliances Co., Ltd.

China is one of the world’s largest exporters of LED lighting, with the majority of shipments classified under HS 8541.10 (light‑emitting diodes) and HS 8543.70 (electric filament or discharge lamps). Major import markets include the European Union, the United States, the Middle East and Southeast Asia, where construction and retrofit projects drive demand for energy‑saving fixtures. Typical certifications required by these markets are CE for EU compliance, UL or ETL for North America, and RoHS for restriction of hazardous substances; many buyers also request IEC 60598 test reports for safety and performance verification.

Logistically, LED fixtures are usually packed in corrugated cardboard boxes with anti‑static liners, and a standard 20‑foot container can accommodate between 1,800 and 2,200 individual bulbs depending on packaging density. Export terms most often seen are FOB Shanghai or CIF destination ports, with buyers arranging freight forwarders for sea or air transport. Chinese manufacturers generally provide a Declaration of Conformity (DoC) and a test report from an accredited lab, which are standard documents for customs clearance and market entry.

Sourcing from Zhongshan Yuekon Electrical Appliances Co., Ltd. - Buyer Guidance

When sourcing from Zhongshan Yuekon, buyers should request the most recent CE Declaration of Conformity and any available RoHS compliance certificates for each LED model. Photometric test reports that detail lumen output, colour temperature, CRI and power consumption are essential to confirm the advertised specifications, especially for high‑brightness downlights.

It is advisable to obtain a sample unit before placing a bulk order to verify fitment (e.g., E27 base), IP rating and thermal performance under intended installation conditions. Typical minimum order quantities for LED fixtures from Chinese suppliers range from 500 to 1,000 pieces, with lead times of 30‑45 days after order confirmation, subject to production scheduling and any required custom packaging.

What types of LED lighting does Zhongshan Yuekon list in its catalogue?

The supplier lists LED downlights, high‑brightness E27 indoor bulbs, 120‑degree wide‑angle bulbs, high‑lumen 5 × 1 W modules, Epistar SMD5630 LEDs, warm‑white 18 W downlights, 4‑inch COB downlights and a 20 W stretchable design model.

Are the listed products covered by any safety certifications?

The catalogue mentions a CE‑listed 20 W stretchable design; buyers should request the CE Declaration of Conformity for all other items and verify RoHS compliance where required.

What specifications should I check for the 24 W E27 indoor bulb?

Confirm the wattage (24 W), lumen output (approximately 2,100 lm), colour temperature (typically 2700‑4000 K), IP rating (IP20 for indoor use) and the base type (E27). Photometric and electrical test reports should detail forward voltage and drive current.

What is a typical MOQ and lead time for these LED fixtures?

Minimum order quantities usually start at 500 units per product line, with a production lead time of 30‑45 days after order confirmation, depending on the specific model and any custom packaging requirements.

Which HS codes are commonly used for these lighting products?

LED lamps and downlights are generally classified under HS 8541.10, while traditional electric lamps fall under HS 8543.70. The supplier’s items would be mapped to these codes for customs filing.

What documentation is recommended before placing an order?

Request a current CE Declaration of Conformity, RoHS compliance certificate, photometric test report, and a material safety data sheet (MSDS) for the LED components. These documents support regulatory clearance and quality verification.

How are the products typically packaged for export?

Items are usually packed in anti‑static lined cardboard boxes, with multiple units per box to optimise container space. A 20‑foot container can hold roughly 2,000‑2,200 individual bulbs depending on box dimensions.

Which markets commonly import LED fixtures from China?

The European Union, United States, Middle East and Southeast Asian countries are the primary import destinations for Chinese LED lighting, driven by construction, commercial retrofits and energy‑efficiency initiatives.