About Yong Hong (Thailand) Co. Ltd. - Industrial Pumps and Air Blower Supplier in Thailand

Yong Hong (Thailand) Co. Ltd. is a Thailand-based supplier with 9 active product listings spanning five industrial categories: Industrial Pumps, Electric Fans & Blowers, Cranes & Lifts, Rings, and Flanges. The catalogue covers submersible sewage pumps in NP and UM series, end suction centrifugal pumps in ECD series, three-lobe air blowers, ring blowers, rotary air blowers, electric chain hoists from two brands, and stainless steel cold-water hose reels. The product mix is consistent with the industrial equipment, fluid handling, and material handling segments that Thailand supplies across Southeast Asia and the wider Asia-Pacific region. The supplier's listings draw on well-known industrial equipment families. Submersible sewage pumps, end suction centrifugal pumps, and rotary lobe blowers fall under HS chapter 8413 (pumps for liquids) and 8414 (air or vacuum pumps, compressors and fans), while electric chain hoists and lifting equipment sit under HS chapter 8425 (pulley tackle and hoists other than skip hoists; winches and capstans; jacks). One catalogue item, the Twister cold-water hose reel, is declared under HS code 8425.11 with stainless steel construction, a material choice typical for corrosion resistance in water-handling environments. Buyers reviewing the catalogue should note that the remaining eight items do not have HS codes assigned in the published facts.

Product Range and Specialties of Yong Hong (Thailand) Co. Ltd.

Yong Hong (Thailand) Co. Ltd.'s catalogue covers three practical industrial groups. The pumping line includes KIRA submersible sewage pumps in NP and UM series, designed for wastewater and dirty-water transfer, and a VOLUTE end suction centrifugal pump in ECD series, which is the standard configuration for clean or lightly loaded water in HVAC, irrigation, and general industrial transfer. Buyers in this category typically evaluate flow rate (m³/h), head (m), solids passage size (mm), and IP rating of the motor housing. The air-handling range features three SANCO blower types: a three-lobe (roots-type) blower, a ring blower (side-channel), and a rotary air blower. These correspond to the three common positive-displacement blower architectures used in wastewater aeration, pneumatic conveying, fish farming, and printing. Typical specifications buyers request include airflow (m³/min), pressure differential (mbar or kPa), noise level (dB(A)), and power rating (kW). The lifting segment adds RHINOS and KOBEC electric chain hoists, generally rated from 0.25 t up to several tonnes, with lifting height (m), duty cycle (FEM/ISO classification), and chain grade (G80) as the usual selection parameters. The hose reel under HS 8425.11 is built in stainless steel for cold-water duty, a material that buyers in food, marine, and chemical wash-down environments typically prefer over painted carbon steel.

Trade and Export Information - Yong Hong (Thailand) Co. Ltd.

Thailand is a regional manufacturing hub for industrial pumps, blowers, and lifting equipment, with a domestic supply chain that serves both the local industrial base (food processing, automotive, construction, and aquaculture) and export markets across ASEAN, the Middle East, Africa, and South Asia. Pumps for liquids under HS 8413 and air/vacuum pumps under HS 8414 are among the more frequently exported machinery lines from Thai exporters, alongside lifting equipment classified under HS 8425. For these categories, buyers and procurement teams commonly require documentation such as the manufacturer's test certificate (performance curve verification), material certificates for wetted parts (stainless steel grade, cast iron grade), ISO 9001 quality management certification at the manufacturer level, and CE marking for goods entering the European Union or the UK. Electrical items such as submersible pumps and electric chain hoists typically need to confirm IP rating (commonly IP55 or IP68 for submersible units), insulation class (F or H), and voltage/frequency compatibility (220V/380V/415V at 50 Hz or 60 Hz). Packaging for export is normally wooden crates or plywood cases with ISPM 15 treatment for cross-border shipment, and Incoterms used in this segment are typically FOB Bangkok / Laem Chabang or CIF for sea freight in 20 ft or 40 ft containers. Thai-origin industrial machinery is generally well accepted in Southeast Asian and African markets where price-to-performance ratio is a key selection factor.

Sourcing from Yong Hong (Thailand) Co. Ltd. - Buyer Guidance

Sourcing from Yong Hong (Thailand) Co. Ltd. requires the same due diligence applied to any industrial-equipment supplier in this segment. Before ordering, buyers should request the manufacturer's full technical data sheet for each model, including performance curves, materials of construction for wetted or load-bearing parts, motor specifications, and applicable standards (ISO 5199 for centrifugal pumps, FEM 9.511 for hoists, for example). Test reports and pre-shipment inspection reports should be requested for the specific lot. For submersible pumps and blowers, it is standard practice to ask for a factory test certificate showing flow, head or pressure, power consumption, and noise level measured against the rated point. For electric chain hoists, buyers typically verify the FEM/ISO duty classification, chain grade, and brake system type. Confirming CE, ISO 9001, or other relevant certifications at the manufacturer level, rather than assuming they apply, is advisable. Lead times for assembled industrial equipment from Thailand are commonly 15 to 45 days depending on configuration, and MOQ is usually one unit per model for capital equipment. Verifying warranty terms, available spare parts, and after-sales support in the buyer's region is recommended before confirming any order.

What product categories does Yong Hong (Thailand) Co. Ltd. supply?

The supplier lists 9 active products across Industrial Pumps (submersible sewage pumps in NP and UM series, end suction centrifugal pumps), Electric Fans & Blowers (three-lobe, ring, and rotary blowers), Cranes & Lifts (electric chain hoists), Rings, and Flanges, plus a stainless steel cold-water hose reel under HS 8425.11.

Which HS codes apply to the listed products?

Only the Twister cold-water hose reel carries an HS code in the published catalogue, 8425.11, with stainless steel construction. The other eight items fall within the broader families HS 8413 (pumps for liquids), 8414 (air or vacuum pumps, compressors and fans), and 8425 (hoists and lifting machinery), but specific subheadings should be confirmed with the supplier.

Which certifications and documents should a buyer request?

For pumps and blowers, request the manufacturer's performance test certificate, material certificates for wetted parts, motor IP rating, and ISO 9001 quality system documentation. For electric chain hoists, request FEM/ISO duty classification, chain grade, and brake specifications. CE marking should be confirmed if the goods are destined for the EU or UK.

What quality parameters matter most for the pumps and blowers listed?

For submersible sewage pumps, key parameters are flow rate (m³/h), head (m), solids passage size (mm), and IP68 motor protection. For centrifugal pumps, evaluate flow, head, efficiency, and NPSH requirements. For blowers, check airflow (m³/min), pressure differential (mbar or kPa), noise level (dB(A)), and motor power (kW).

What is the typical MOQ and lead time for these industrial products?

Capital equipment such as pumps, blowers, and hoists is normally sold one unit per model, with MOQ usually set at one piece. Lead times depend on configuration and stock, typically ranging from 15 to 45 days for standard models and longer for customised voltage, frequency, or material specifications.

What packaging and shipping terms are standard for industrial equipment from Thailand?

Industrial pumps, blowers, and hoists from Thailand are typically packed in ISPM 15-treated wooden crates or plywood cases suitable for sea freight in 20 ft or 40 ft containers. Common Incoterms in this segment are FOB Bangkok or Laem Chabang, with CIF also offered for full-container shipments to ports in ASEAN, the Middle East, and Africa.

Which regions typically import this type of industrial equipment from Thailand?

Thai-origin pumps, blowers, and lifting equipment are commonly exported to ASEAN neighbours, South Asia, the Middle East, and Africa, where they serve water and wastewater treatment, aquaculture, construction, and general industrial applications. European and North American buyers also source from Thailand for price-sensitive industrial projects.