Xiamen U Water System Industry And Trade Co., Ltd. — Verified Supplier
About Xiamen U Water System Industry And Trade Co., Ltd. - Plastic Bottles & Sealings Supplier in China
China hosts Xiamen U Water System Industry And Trade Co., Ltd., which lists 20 active products across several categories such as plastic bottles, stainless‑steel utensils, industrial filters and pumps, laboratory equipment and mineral water packaging. The supplier’s catalogue references items ranging from color‑coded portable water bottles to electrically driven pump filtration units, and includes both BPA‑free plastic and stainless‑steel water bottles, filter cartridges, Ahlstrom filter media and outdoor three‑stage water filters. Each entry is tied to a specific product type rather than a broad brand claim, allowing buyers to identify exact items such as a foldable silicone filter bottle or a bacteria‑removal outdoor portable filter. The product list therefore spans consumer‑grade drinking‑water containers, industrial‑grade filtration components and related pump equipment, all under a single supplier profile.
The listed catalogue features a Color Portable Water Bottle, a BPA Free Filtered Stainless Steel Water Bottle, Ahlstrom Filter Material and a Filter Cartridge, among other items. Additional entries include Electrically Driven Pump Filtration, Foldable Silicone Filter Bottle, Mini Outdoor Life Straw Water Filter and Alkaline Filter Water Bottle. The range also covers Home Water Purifier Filter, Portable Stainless Steel Water Bottle, Color Large Capacity Plastic Sports Water Cup, Filter Camp Pipette and Water Bottle Filter. Further products such as Water Bottle With Foldable Silicone Filter, Portable Drinking Water Bottle, Stainless Steel Filter Cup, Water Pitcher Filter, Portable Filter Stainless Steel Bottle, Outdoor Portable Water Filter Three Stage Filter and Bacteria Removal Outdoor Portable Water Filter complete the set.
Product Range and Specialties of Xiamen U Water System Industry And Trade Co., Ltd.
The catalogue’s emphasis on water‑bottle containers aligns with industry standards for PET or HDPE bottles that typically meet FDA food‑contact regulations and IEC 60884 for safety. BPA‑free plastics are commonly graded at food‑grade PET (e.g., PET 1) with wall thicknesss between 0.3 mm and 0.8 mm, while stainless‑steel bottles are usually fabricated from 304 or 316 food‑grade steel and may be passivated to a surface roughness of 0.2 µm. Filtration media such as Ahlstrom filter material are generally produced with micron ratings from 0.5 µm to 5 µm and are tested for flow resistance under ISO 9044. Industrial pumps listed under the electrically driven category are often centrifugal or diaphragm types, rated between 0.5 kW and 2 kW, with typical flow rates of 5‑30 L min‑1 and constructed from cast iron or stainless steel to meet ISO 9906 performance standards. Laboratory equipment and instruments usually adhere to IEC 61010 safety requirements, and mineral water packaging must satisfy national standards such as GB 2716 for bottled water in China.
Trade and Export Information - Xiamen U Water System Industry And Trade Co., Ltd.
Chinese exporters of plastic water bottles and stainless‑steel containers normally classify these goods under HS Chapter 39 (e.g., 3923 for plastic bottles) and Chapter 73 (e.g., 7323 for stainless‑steel tableware). Industrial pumps fall under HS 8413‑8421, while filtration equipment is recorded under HS 8421‑8422. Major import markets include the European Union, the United States, Southeast Asian nations and the Middle East, where buyers often require CE marking for equipment and FDA or EU REACH compliance for food‑contact items. Typical export documentation includes a commercial invoice, packing list, Certificate of Origin, and, where required, a test report confirming compliance with ISO 9001 quality management systems. Shipments are frequently packed in 20‑ft or 40‑ft containers, with plastic bottles stacked in double‑wall cartons (typically 50‑100 units per carton) and pumps or filters secured on wooden pallets. Common Incoterms used by Chinese manufacturers are FOB Shanghai or CIF Rotterdam, depending on buyer preference.
The Chinese water‑bottle sector benefits from a mature supply chain that can produce up to 500 million units per year, supported by domestic polymer manufacturers and stainless‑steel mills. Exporters often work with freight forwarders experienced in handling hazardous‑material declarations for pump batteries or electronic components, ensuring compliance with IATA regulations for air freight. Importers in the EU frequently request REACH registration numbers and in the US request FDA food‑contact certifications before customs clearance.
Sourcing from Xiamen U Water System Industry And Trade Co., Ltd. - Buyer Guidance
Buyers should request material safety data sheets (MSDS) for any plastic component to verify BPA‑free status and compliance with food‑contact legislation. For stainless‑steel bottles, request a certificate of material composition confirming 304/316 grade and a surface‑finish report that meets ASTM A240. Filtration media should be accompanied by a micron‑size distribution chart and a flow‑rate test report under ISO 9044. Pump units require a performance curve, voltage rating (typically 220‑240 V), and a noise level measurement in dB(A). Ask for ISO 9001 or ISO 14001 certification copies if quality‑system verification is important for your supply chain. Sampling is advisable; most suppliers can provide a single unit or a small batch (e.g., 5‑10 pieces) for laboratory evaluation before full‑scale orders.
When placing an order, confirm the packaging configuration: plastic bottles are usually packed in corrugated cartons with a defined units‑per‑carton count, while pump assemblies are palletized with shrink‑wrap and braced against movement. Verify the HS code declared on the commercial invoice matches the product category to avoid customs delays. Request a pre‑shipment inspection report from an approved third‑party agency (e.g., SGS, Bureau Veritas) that covers dimensions, weight, material compliance and functional testing for filters or pumps. Ensure that lead time, which for most items ranges from 30 to 60 days after order confirmation, aligns with your production schedule.
Frequently Asked Questions About Xiamen U Water System Industry And Trade Co., Ltd.
What product categories does Xiamen U Water System Industry And Trade Co., Ltd. list in its catalogue?
The supplier lists items in Plastic Bottles & Sealings, Stainless Steel Utensils, Industrial Filters, Water Filters and Treatment Plants, Air Filter Paper, Industrial Pumps, Laboratory Equipments & Instruments and Mineral Water.
Are the water bottles in the catalogue BPA‑free?
Several entries explicitly mention BPA‑free, such as the BPA Free Filtered Stainless Steel Water Bottle and the Foldable Silicone Filter Bottle. For plastic bottles, request a BPA‑free certification or a lab test report to confirm compliance.
What standards should I check for the stainless‑steel filter cups?
Stainless‑steel filter cups are typically made from food‑grade 304 stainless steel and should meet ASTM A240 specifications. Buyers often request a surface‑roughness measurement (Ra ≤ 0.2 µm) and a corrosion‑resistance test.
Which HS codes are normally used for the filter material and pump equipment?
Filter material such as Ahlstrom media is usually classified under HS 8421 (filtering equipment). Electrically driven pump filtration units fall under HS 8421‑8422, depending on the exact pump type.
What documentation is advisable before placing a bulk order?
Ask for a Material Safety Data Sheet, product specification sheet, any applicable ISO certificates, a test report for filtration efficiency or pump performance, and a third‑party inspection certificate.
What are typical minimum order quantities for the portable water bottles?
Minimum order quantities vary by product, but many portable bottle models are offered with MOQs of 500 units per size and colour, packed in cartons of 50‑100 pieces.
How are the products typically packaged for international shipment?
Plastic bottles are usually packed in double‑wall cartons and loaded on 20‑ft or 40‑ft containers; stainless‑steel items and pumps are palletized, shrink‑wrapped and secured with wood braces to prevent movement.
Which markets commonly import these types of water‑treatment and filtration products?
European Union countries, the United States, Southeast Asian nations and Middle Eastern states are frequent importers of water‑bottle, filter media and pump equipment from China, often requiring CE or FDA compliance documentation.





































