About Vaneesa Overseas LLP - Motorcycle Parts Supplier in India

Vaneesa Overseas LLP operates from India and lists 97 active products across several automotive categories. The catalogue includes piston kits, cylinder heads, clutch assemblies, gear shafts, tyre components and a range of three‑wheeler accessories, as well as lubricants and helmets. Specific entries such as the Victor Glx Lifter Plate are recorded under HS code 8708.93 and are described as hardened alloy steel or carbon steel. The supplier’s top categories are Motorcycle Parts, Automobile Gears, Shafts & Clutches, Automobile Tyres, Tubes & Wheels, Helmets & Face Masks, and Lubricants. Each item is presented by model name without additional technical specifications in the source data.

The product list contains multiple Bajaj BM‑100 components - piston kit, ringset, cylinder head, clutch housing and related transmission parts - indicating a focus on a single motorcycle platform. Additional entries cover Victor Glx aftermarket parts such as oil filters, speedometer cables and throttle cables, expanding the catalogue to two‑wheel and three‑wheel vehicle support. No HS codes are provided for the majority of items, limiting the customs classification to the single noted code for the lifter plate. The supplier’s catalogue does not include any stated certifications or compliance marks.

Product Range and Specialties of Vaneesa Overseas LLP

The catalogue covers typical motorcycle replacement parts: pistons, rings, cylinder heads, clutch plates, lifter plates and chain sprockets, which are commonly manufactured from forged aluminum alloys, heat‑treated steel or hardened alloy steel depending on load requirements. In the global market, piston kits are often supplied to ISO 9001 quality management standards and conform to OEM tolerances such as ±0.02 mm bore diameter and surface roughness Ra 0.8 µm. Gear shafts and clutch assemblies are usually heat‑treated to achieve a hardness of 45‑55 HRC and are inspected for dimensional accuracy under ISO 286. Tyre front and rear units for motorcycles and three‑wheelers are typically supplied in 120‑200 mm rim size ranges, with rubber compounds meeting Indian Standard IS 15630 for tread wear and wet grip. Lubricants such as recycled oil are graded by viscosity (e.g., ISO VG 32) and may be blended to meet API SJ or SE specifications. Helmets and face masks, though not detailed in the list, are generally produced from polycarbonate shells and EPS liners to meet ECE R‑22 standards.

Trade and Export Information - Vaneesa Overseas LLP

India is a major exporter of automotive components, with the majority of shipments destined for South Asia, the Middle East, Africa and parts of Europe. Motorcycle parts and three‑wheeler accessories typically fall under HS chapter 87 (vehicles) and chapter 84 (machinery), with sub‑headings like 8708.93 used for specific metal parts. Buyers often require certificates of origin, commercial invoices and packing lists that reference the correct HS code for customs clearance. Standard Incoterms for Indian automotive exports are FOB Mumbai or CIF Dubai, depending on the buyer’s logistics network. Common buyer‑required certifications include ISO 9001 for quality management, ISO 14001 for environmental management, and, for safety‑critical items such as helmets, CE marking or ECE R‑22 compliance. Export documentation may also reference the Indian Export Promotion Capital Goods scheme for eligible machinery components.

Typical importing regions include East Africa where three‑wheeler transport is prevalent, the Gulf Cooperation Council countries that import motorcycle spares, and European markets that source specialized gear shafts for niche models. Regulatory scrutiny often focuses on material composition (e.g., carbon vs. alloy steel) and compliance with emission‑related lubricant standards. Packaging for metal parts usually involves corrugated cardboard boxes with internal foam inserts, while tyres are shipped in bulk on 20‑ft containers with palletized stacking.

Sourcing from Vaneesa Overseas LLP - Buyer Guidance

When evaluating Vaneesa Overseas LLP’s offerings, buyers should request material test reports confirming the chemical composition and hardness of steel components such as the Victor Glx Lifter Plate (HS 8708.93). For piston kits and cylinder heads, dimensional drawings and tolerance certificates are standard verification documents. Samples of tyre compounds should be accompanied by rubber hardness (Shore A) and tread depth measurements to ensure compatibility with target vehicle specifications. Because no certifications are listed, buyers are advised to ask for ISO 9001 or ISO 14001 compliance certificates before confirming large orders. Verification of the recycled oil’s viscosity grade and API classification should be obtained through a recent lab analysis report. Finally, confirm packaging dimensions, container loading plans and lead times, noting that metal parts often require anti‑corrosion coating or moisture‑proof wrapping for sea freight.

The supplier’s catalogue does not specify minimum order quantities, so buyers should clarify MOQ per item, especially for low‑volume items like specialized clutch housings. Lead times for machined steel parts in India typically range from 15 to 30 days after order confirmation, while tyres and lubricants may be stocked and shipped within 7 days. Requesting a pre‑shipment inspection report (e.g., SGS or Bureau Veritas) can provide additional assurance of product conformity.

What HS code applies to the Victor Glx Lifter Plate offered by Vaneesa Overseas LLP?

The Victor Glx Lifter Plate is listed under HS code 8708.93, which covers parts of motor vehicles of a kind used for other than the transport of passengers.

Which material specifications are provided for the Victor Glx Lifter Plate?

The product description states the material as hardened alloy steel or carbon steel, typical for load‑bearing automotive components.

Are there any quality certifications associated with Vaneesa Overseas LLP’s motorcycle parts?

No certifications are mentioned in the supplier data; buyers should request ISO 9001 or ISO 14001 certificates if required for their procurement standards.

What documentation should a buyer request for the Bajaj BM‑100 piston kit?

Buyers should ask for a material test report, dimensional tolerance certificate, and an OEM conformity statement that includes bore diameter and surface finish specifications.

How are tyre products from this supplier typically packaged for export?

Tyre front and rear units are usually packed in bulk on pallets within 20‑ft containers, with protective banding and cardboard separators to prevent damage during transit.

What are the typical lead times for metal components such as gear shafts and clutch assemblies?

Lead times for machined steel parts in India generally range from 15 to 30 days after order confirmation, depending on order size and machining workload.