About Taizhou Zhongsheng Frp Co., Ltd - FRP Panels Supplier in China

China, Taizhou, hosts Taizhou Zhongsheng Frp Co., Ltd which lists five active FRP products. The catalogue includes an FRP Cladding Plate, a QFRP Anti‑corrosion Plate identified under HS code 3921.90 and made from fiberglass‑reinforced thermosetting plastic, an FRP Cooling Tower Plate, an FRP Sandwich Panel and an FRP Daylighting Panel. Each item falls within the broader panel and plate categories noted for the supplier, reflecting a focus on composite solutions for construction and industrial applications.

The supplier’s product set targets sectors that require lightweight, corrosion‑resistant materials such as building façades, water‑treatment equipment and industrial cooling systems. By offering both solid plates and structured panels, the company provides alternatives to traditional steel plates, leveraging the high strength‑to‑weight ratio of FRP composites. The active product count of five indicates a concise but specialised portfolio within the FRP market.

Product Range and Specialties of Taizhou Zhongsheng Frp Co., Ltd

The listed FRP Cladding Plate is typically supplied in thicknesses from 2 mm to 12 mm, with a density around 1.6 g/cm³ and conforms to ASTM D2583 for sheet and plate dimensions. The QFRP Anti‑corrosion Plate (HS 3921.90) is engineered for chemical‑resistant environments and often meets ISO 527‑2 tensile testing and ASTM D790 flexural specifications. FRP Cooling Tower Plates are commonly fabricated in 4 mm to 20 mm thicknesses to withstand water‑impact and are evaluated for UV‑stability per ASTM G154. FRP Sandwich Panels combine a lightweight core (often polyurethane foam) with outer FRP skins, delivering panel thicknesses of 30 mm to 150 mm and flexural rigidity measured in N·m. FRP Daylighting Panels are designed for translucency, typically featuring a light‑transmission rate of 30‑60 % and are tested for impact resistance under ISO 179.

Industry practice for these composites includes grades such as ICUMSA‑type clarity for translucent panels, fire‑rating classifications like R30 or R60 per EN 13501‑1, and moisture absorption limits below 0.5 % by weight. Buyers frequently specify surface finishes - smooth, textured, or anti‑slip - and may request reinforcement fibers oriented at 0°, 45° or 90° depending on load requirements. The material data sheets normally list tensile strength in the range of 30‑60 MPa, flexural strength of 40‑80 MPa, and a glass transition temperature above 120 °C for thermosetting matrices.

Trade and Export Information - Taizhou Zhongsheng Frp Co., Ltd

China is a leading exporter of FRP panels and plates, with shipments commonly destined for construction, water‑treatment and petrochemical projects in Southeast Asia, the Middle East, Africa and parts of Europe. The HS‑code family 3921 covers "plastic plates, sheets and film, not elsewhere specified or included" and is the standard tariff line for flat FRP products such as the anti‑corrosion plate. Export logistics typically involve wooden crates or moisture‑resistant film over pallets, loaded into 20‑ft or 40‑ft containers; Incoterms such as FOB Shanghai or CIF destination ports are frequently used.

Regulatory expectations often include compliance with REACH for chemical safety, CE marking for EU markets, and UL fire‑rating for North American applications. Buyers usually request third‑party inspection reports (e.g., SGS, BV) and may require pre‑shipment sampling under the buyer’s quality protocol. Chinese FRP manufacturers often hold ISO 9001 quality‑management certification, but specific certifications should be confirmed per transaction.

Sourcing from Taizhou Zhongsheng Frp Co., Ltd - Buyer Guidance

When sourcing from Taizhou Zhongsheng, request the full material data sheet, including mechanical test reports (tensile, flexural, impact) and fire‑rating certificates. Verify that the anti‑corrosion plate’s HS code 3921.90 aligns with customs documentation and that the supplied batch complies with ASTM D2583 or equivalent standards. Buyers should also ask for ISO 9001 certification copies and any CE or UL conformity assessments relevant to the target market.

Typical minimum order quantities are aligned with container loads - approximately 1 ton for 20‑ft containers or 2 ton for 40‑ft containers - though smaller pilot orders can be arranged as sample panels. Lead times for production and inspection generally range from 30 to 45 days after receipt of a confirmed purchase order and required test documentation. Prior to full‑scale purchase, obtaining a 500 mm × 500 mm sample for mechanical and weathering tests is a common practice to confirm material performance.

What FRP products does Taizhou Zhongsheng list in its catalogue?

The catalogue includes an FRP Cladding Plate, a QFRP Anti‑corrosion Plate (HS 3921.90), an FRP Cooling Tower Plate, an FRP Sandwich Panel and an FRP Daylighting Panel.

Which HS code applies to the QFRP Anti‑corrosion Plate?

The QFRP Anti‑corrosion Plate is classified under HS code 3921.90, which covers plastic plates, sheets and film not elsewhere specified.

What mechanical properties are typically verified for these FRP plates?

Buyers usually check tensile strength in the range of 30‑60 MPa, flexural strength of 40‑80 MPa, and impact resistance according to ISO 179 or ASTM D256. Thickness and density are also confirmed against the supplier’s data sheet.

Which certifications are commonly required for FRP panels and plates?

Typical requirements include ISO 9001 quality‑management certification, CE conformity for EU markets, and UL fire‑rating certificates where applicable. ASTM or ISO test reports for mechanical performance are also standard.

How are the FRP products packaged for international shipment?

Products are generally crated in wood, wrapped in moisture‑resistant film, palletized and loaded into 20‑ft or 40‑ft containers. This protects the panels from impact and humidity during transit.

What is a usual lead time for an order from this supplier?

After the purchase order and required documentation are received, production and inspection typically require 30‑45 days before the goods are ready for shipment.

What sample size is practical for testing FRP panels?

A common sample is a 500 mm × 500 mm panel or a 1 m² sheet, which allows buyers to conduct mechanical, UV‑aging and fire‑rating tests before placing a larger order.

Which global markets commonly import Chinese FRP panels?

Major importers include construction firms in Southeast Asia, water‑treatment facilities in the Middle East, infrastructure projects in Africa and European countries that require lightweight, corrosion‑resistant building materials.