About Super Electric Motor, Ltd. - Electric Motors Supplier in Hong Kong

Super Electric Motor, Ltd. is based in Hong Kong and lists five active products in its catalogue. The company focuses on electric motors, covering a range that includes universal motors, shaded‑pole induction motors, capacitor motors, permanent‑magnet motors and single‑phase universal motors. Each product falls under the broader HS heading 8501 for electric motors, which is part of chapter 85 for electrical machinery. The catalogue does not provide specific power ratings, but the product names indicate typical applications from small appliances to industrial equipment. The supplier is classified in the harbor trust tier.

The listed motor types represent common designs used worldwide. A universal motor combines series‑wound winding with a commutator, suited for high‑speed, low‑torque tasks. Shaded‑pole induction motors are simple, low‑cost units often found in fans and pumps. Capacitor (or capacitor‑run) motors provide higher starting torque for compressors and HVAC. Permanent‑magnet motors use rare‑earth or ferrite magnets for high efficiency in drives and robotics. Single‑phase universal motors are variants designed for portable tools. The catalogue’s five entries cover these distinct engineering families.

Product Range and Specialties of Super Electric Motor, Ltd.

Super Electric Motor’s catalogue lists five distinct motor designs: universal motor, shaded‑pole induction motor, capacitor motor, permanent‑magnet motor and single‑phase universal motor. These correspond to widely recognised motor families in the electric‑motor market. Universal motors typically operate at 120 V‑240 V AC, with power ratings from 0.1 kW up to 5 kW, and are rated for speeds up to 20 000 rpm. Shaded‑pole induction motors are usually rated 0.02 kW‑0.5 kW, with efficiency around 60‑70 % and low starting current.

Capacitor motors commonly meet IEC 60034‑2‑1 efficiency classes and are supplied with run‑capacitors of 5 µF‑30 µF for single‑phase operation. Permanent‑magnet motors often comply with IEC 60034‑30‑1 efficiency classes (IE1‑IE3) and may use NdFeB or ferrite magnets, delivering power densities above 2 kW/kg. Single‑phase universal motors share characteristics with standard universal motors but are built for portable equipment, often featuring brush‑type commutators and thermal overload protection. Buyers typically look for specifications such as rated voltage, power, speed (rpm), torque, insulation class (e.g., Class B or F), and IEC efficiency class.

Trade and Export Information - Super Electric Motor, Ltd.

Hong Kong serves as a major transshipment hub for electrical machinery, and exporters of electric motors from the region commonly ship to Southeast Asian manufacturers, European OEMs, and North American distributors. The HS heading 8501 captures most motor types, and customs authorities in importing countries often require a commercial invoice, packing list, and a CE Declaration of Conformity for EU shipments or UL certification for US markets.

Standard packaging for motors of the sizes listed includes wooden crates or reinforced cardboard boxes with internal cushioning, sized to fit 20‑ft or 40‑ft containers. Common Incoterms used by Hong Kong exporters are FOB Hong Kong and CIF to destination ports. Buyers should verify that the supplier can provide ISO 9001 quality‑management certification, as it is frequently requested for electrical equipment, and that any motor intended for regulated markets carries the relevant CE or UL test reports.

Sourcing from Super Electric Motor, Ltd. - Buyer Guidance

When sourcing from Super Electric Motor, Ltd., buyers should request product data sheets that list rated voltage, power, speed, torque, insulation class and efficiency. Test reports confirming compliance with IEC 60034 standards, as well as a CE Declaration of Conformity or UL listing, should be obtained before finalising orders.

Samples of the specific motor type are useful to validate performance and mounting dimensions. Typical minimum order quantities for small‑batch motor orders range from one to ten units, with lead times of 15‑30 days after order confirmation, depending on the model. Verify that the supplier can supply packaging details, weight per unit (often 1‑15 kg) and container loading plans.

What motor types are listed in the catalogue?

The catalogue includes a universal motor, a shaded‑pole induction motor, a capacitor motor, a permanent‑magnet motor and a single‑phase universal motor.

Under which HS heading are these motors classified?

Electric motors are generally classified under HS chapter 85, heading 8501, which covers electric motors of various output ranges.

Which international standards apply to these motor families?

Typical standards include IEC 60034 for general motor construction, IEC 60034‑2‑1 for efficiency, and IEC 60034‑30‑1 for permanent‑magnet motor efficiency classes.

What certifications are commonly required for importing these motors?

Importers usually request a CE Declaration of Conformity for EU markets, UL or CSA listings for North America, and an ISO 9001 quality‑management certificate from the supplier.

How can a buyer obtain a sample?

Buyers can request a single unit sample of the desired motor model; the supplier typically ships the sample in a small wooden crate or reinforced cardboard box with the buyer covering freight.

What are typical packaging and shipping methods?

Motors are packed in wooden crates or sturdy cardboard boxes, placed on pallets, and loaded into 20‑ft or 40‑ft containers. Common Incoterms are FOB Hong Kong or CIF to the destination port.

What documentation should be verified before placing an order?

Verify the product data sheet, IEC test reports, CE or UL certification copies, and, if applicable, the supplier’s ISO 9001 certificate. Also confirm the motor’s rated voltage, power, speed and torque specifications match the buyer’s application.

What are common minimum order quantities and lead times for these motors?

Typical minimum order quantities range from one to ten units, with lead times of 15‑30 days after order confirmation, depending on the specific motor model and required documentation.