About Stable Technology (Shenzhen) Co., Ltd - Networking & Internet Peripherals Supplier in China

Stable Technology (Shenzhen) Co., Ltd is based in Shenzhen, China and currently lists five active products. The company is classified as an imported supplier in the harbor trust tier. Its catalogue focuses on Networking & Internet Peripherals and Electric Connectors. All listed items belong to the fiber optic connector family, which falls under HS chapter 85, subheading 8544 for optical fiber connectors and related components. The product set includes connectors, adapters, attenuators, splitters and a specific SMA 905/906 connector variant. Buyers can find these items in the supplier’s online catalogue under the mentioned categories.

Product Range and Specialties of Stable Technology (Shenzhen) Co., Ltd

The supplier’s catalogue covers core fiber optic passive components. Standard fiber optic connectors are typically offered in LC, SC, ST, and MPO formats, with ferrules made from zirconia ceramic and insertion loss ≤0.5 dB. Adapters commonly provide low return loss (<‑55 dB) and support both single‑mode and multimode fibers. Attenuators are manufactured to deliver calibrated attenuation steps, often with a tolerance of ±0.1 dB and a temperature range of - 40 °C to +85 °C. Splitters are available in 1×2, 1×4, and 1×8 configurations, with split ratios of 50/50 and excess loss generally below 0.3 dB. The SMA 905/906 connector follows the IEC 61754‑14 specification for fiber‑to‑SMA coupling, featuring a 0.5 mm ferrule and gold‑plated contacts.

Trade and Export Information - Stable Technology (Shenzhen) Co., Ltd

China is a major global source of fiber optic components, and exporters from the Guangdong region ship primarily to North America, Western Europe, and Southeast Asian telecom markets. The HS 8544 sub‑heading covers the connector, adapter, attenuator and splitter items listed by this supplier, and customs authorities often require a commercial invoice, packing list and test certificates for these goods.

Importers usually request compliance with IEC 61754, IEC 61753‑1, RoHS, and where applicable CE marking for EU shipments. Products are commonly packed in anti‑static bubble trays within moisture‑sealed cartons, with typical container loads of 20‑ft or 40‑ft containers holding 1,200 to 2,400 units depending on packaging density. Shipping terms such as FOB Shenzhen or CIF destination are standard for these components.

Sourcing from Stable Technology (Shenzhen) Co., Ltd - Buyer Guidance

Buyers should request a test report that includes insertion loss, return loss, return‑loss spectrum and mechanical durability according to IEC 61753‑1. Verification of the connector ferrule material (zirconia) and contact plating (gold) is also standard practice.

A pre‑production sample is advisable to confirm the specified split ratio, attenuation steps or SMA coupling performance before placing a bulk order. Typical minimum order quantities range from 500 to 1,000 units per SKU, with lead times of 15‑30 days after design approval and receipt of required documentation.

What fiber optic connector standards does Stable Technology comply with?

The catalogued connectors are designed to meet IEC 61754 for connector geometry and IEC 61753‑1 for insertion loss and return loss limits.

Are test reports for insertion loss and return loss available?

Yes, the supplier can provide factory test reports showing insertion loss (≤0.5 dB) and return loss (≥‑55 dB) for each connector batch.

Which packaging method is used for the fiber optic splitters?

Splitters are packed in anti‑static trays, then placed in moisture‑sealed cartons to protect the optical surfaces during transit.

What certifications should a buyer request for these components?

Buyers typically request RoHS compliance, IEC test certificates, and, for EU shipments, a CE declaration of conformity.

What is the typical MOQ for the SMA 905/906 connector?

The usual minimum order quantity for the SMA 905/906 connector is around 500 units, though larger batches may reduce lead time.

What are the common shipping terms offered by the supplier?

Freight terms such as FOB Shenzhen and CIF destination are commonly used for these fiber optic components.

Can custom specifications for attenuator loss values be accommodated?

The supplier can produce attenuators with calibrated loss steps in the range of 0.5 dB to 30 dB, subject to a design approval process.

Which HS code should be used for customs clearance of the fiber optic adapter?

The appropriate HS sub‑heading is 8544, which covers fiber optic connectors and related accessories for customs documentation.