About Smbx1 - Light Emitting Diode Supplier in China

Smbx1 operates from China and presently lists six active products in its catalogue. The company focuses on Light Emitting Diode (LED) solutions that fall under the broader category of electric lamps, tubes, bulbs, lights and light fittings. Its product titles include the ECE R65 R10 Low Profile LED Beacon, ECE R65 R10 Strobe Light Bar, Forklift Strobe Light, generic LED Beacons, LED Lighthead and LED Strobe Lightbars. Each entry is identified as an LED‑based signaling or illumination device, indicating compliance with vehicle‑lighting standards such as ECE R65. The catalogue does not provide HS codes, so the products are generally classified within HS chapter 94 for lamps and other lighting equipment.

The six items cover both fixed‑mount and portable lighting applications, ranging from low‑profile beacons used on commercial vehicles to high‑intensity strobe bars for industrial forklifts. The naming suggests conformity to the ECE R65 regulation, which specifies photometric performance, colour, and flashing frequency for safety lamps. By grouping the products under LED beacons, lightheads and strobe lightbars, the supplier signals a focus on high‑visibility, low‑power lighting solutions. Buyers can therefore expect devices designed for automotive, logistics and general industrial environments. The product set reflects typical LED lighting formats used in export markets for vehicle and equipment safety.

Product Range and Specialties of Smbx1

The catalogue lists two ECE‑compliant beacon models, a forklift‑specific strobe, and three broader LED lighting formats (beacon, lighthead and strobe lightbars). In the LED lighting industry, such devices are usually offered in standard wattage bands from 5 W to 30 W, with colour temperatures between 4000 K and 6500 K, and luminous flux ranging from 500 lm to 3000 lm depending on the application. Typical technical specifications include an IP65 or higher ingress protection rating, a voltage rating of 12 V DC for vehicle‑mounted units, and a flash frequency of 1 Hz to 2 Hz for safety beacons. Compliance with IEC 60598 (general lamp safety) and IEC 62034 (vehicle lighting) is common for products that reference ECE R65. Buyers often request data sheets that list forward voltage, current draw, and thermal management details such as heat‑sink dimensions.

Industry practice for LED beacons and strobe lights includes the use of aluminium or polycarbonate housings, mounting brackets compatible with standard vehicle brackets, and connectors that meet ISO 7638 for automotive lighting. For forklift applications, the strobe lights are frequently rated for vibration resistance (ISO 16750‑3) and may incorporate a magnetic base for quick attachment. The LED Lighthead category typically serves as a replacement for halogen headlamps, offering wattages of 10 W to 20 W, a CRI above 80, and optional dimming via PWM control. These general specifications provide a benchmark for evaluating the six items listed by Smbx1.

Trade and Export Information - Smbx1

China is a leading exporter of LED lighting components, with the majority of shipments destined for Europe, North America and Southeast Asia. Exporters of vehicle‑type beacons and industrial strobes usually classify their goods under HS code 9405 (lamps and lighting fittings) and HS code 8539 (electric lamps) for customs clearance. Buyers in the automotive aftermarket, logistics firms and construction sites typically request CE marking, RoHS compliance and an IEC type‑test certificate to satisfy EU and North American regulations. Common Incoterms for Chinese LED lighting suppliers are FOB Shanghai or CIF Los Angeles, with container loads ranging from 20 ft (approximately 1 200 kg) to 40 ft (about 2 400 kg) depending on packaging.

Packaging for LED beacons and strobe lightbars often involves double‑wall corrugated boxes with internal foam inserts, and pallets wrapped in stretch film for stability during sea freight. Export documentation generally includes a commercial invoice, packing list, certificate of origin, and test reports for photometric performance. Because the catalogue does not list specific certifications held by Smbx1, buyers should verify that the supplied items meet the ECE R65 standard and possess any third‑party test reports requested before shipment. Typical importers include vehicle manufacturers, fleet operators and equipment rental companies that require consistent compliance with safety lighting regulations.

Sourcing from Smbx1 - Buyer Guidance

When sourcing LED beacons or strobe lights from Smbx1, buyers should request the latest ECE R65 test report, CE Declaration of Conformity and RoHS compliance certificate. It is advisable to obtain a sample or photometric test sheet showing luminous intensity (in candela), flash frequency, colour temperature and IP rating before confirming a bulk order. Verify that the supplied voltage matches the intended application (e.g., 12 V DC for vehicle‑mounted units) and that the connector type complies with ISO 7638 standards.

Typical minimum order quantities for Chinese LED safety lamps range from 500 to 1 000 units, with lead times of 20‑30 days after sample approval. Buyers should confirm packaging details - such as inner foam dimensions, outer carton size and pallet configuration - to ensure safe transport and efficient container loading. Requesting a third‑party inspection report (e.g., from SGS or Bureau Veritas) prior to shipment can further reduce the risk of non‑conformity.

What standards do Smbx1's LED beacons comply with?

The product titles reference ECE R65, so the beacons are expected to meet the photometric and safety requirements of that regulation, as well as general IEC 60598 and IEC 62034 standards for lamps and vehicle lighting.

Are certifications such as CE or RoHS available for these products?

The supplier’s catalogue does not list specific certifications, so buyers should ask Smbx1 to provide a CE Declaration of Conformity and RoHS compliance certificate before placing an order.

What typical technical specifications should I verify for the LED Strobe Lightbars?

Check the wattage range (usually 5‑30 W), luminous flux (500‑3000 lm), flash frequency (1‑2 Hz), IP rating (minimum IP65), and voltage (commonly 12 V DC) to match your application requirements.

How are the products packaged for international shipping?

LED lighting items are normally packed in double‑wall corrugated boxes with foam inserts, placed on Euro pallets, and shrink‑wrapped for container loading.

What are the common Incoterms used for exporting these LED lighting products from China?

Suppliers typically offer FOB Shanghai or CIF to major ports such as Los Angeles, Rotterdam or Singapore, allowing buyers to choose the most suitable delivery term.

What is the usual minimum order quantity and lead time for Smbx1's LED products?

Minimum order quantities generally start at 500 units per SKU, with a production lead time of about 20‑30 days after sample approval and final order confirmation.

Which test reports are important to request before buying?

Request photometric test reports (candela, luminous flux), an ECE R65 compliance test report, and a RoHS declaration to ensure the products meet safety and environmental standards.

Can I receive a functional sample before committing to a full order?

Yes, most Chinese LED lighting exporters provide a functional sample; buyers should confirm sample availability, shipping cost and any associated testing fees in advance.