About Shree Samarth Krupa - Nuts Supplier in India

India hosts five active product listings from Shree Samarth Krupa, covering nuts, steel rods, insulation pins and decking components. The catalogue includes a Barrel Nut, a Slotted Nut, a Stuck Up Pin/hvac Insulation Pin, a Deck Tube used in flooring systems, and a Swimming Pool Safety Cover Installation Rod identified under HS code 7305.11 and fabricated from ERW carbon steel. Each entry is grouped within the broader categories of nuts, steel rods, pins and wooden & bamboo flooring, reflecting the supplier’s multi‑segment focus. No additional product attributes such as dimensions or material grades are supplied in the source data.

The supplier’s five‑item list aligns with common industrial hardware families. The nuts are typical fasteners used in machinery and construction, the steel rod is a carbon‑steel component for pool safety covers, the insulation pin serves HVAC sealing functions, and the deck tube is a structural element for flooring assemblies. All items are presented without explicit certification claims, leaving verification of standards to the buyer’s due‑diligence process.

Product Range and Specialties of Shree Samarth Krupa

Shree Samarth Krupa’s catalogue lists a Barrel Nut and a Slotted Nut, both of which are generally produced to metric thread standards (M5‑M24) and often meet grade 8.8 or 10.9 strength specifications in the steel fastener market. The Swimming Pool Safety Cover Installation Rod, classified under HS 7305.11, is typically supplied as ERW carbon steel with tensile strength around 400‑500 MPa and surface‑treated to resist corrosion in outdoor environments. The Stuck Up Pin/hvac Insulation Pin is usually made from stainless steel or coated carbon steel to achieve electrical insulation and corrosion resistance, with typical diameters from 4 mm to 12 mm. The Deck Tube, a component for wooden or bamboo flooring systems, is often fabricated from treated timber or composite material, sized to fit standard joist spacing (e.g., 400 mm or 600 mm centers) and designed for moisture content below 12 % to prevent warping.

Trade and Export Information - Shree Samarth Krupa

India’s export profile for steel hardware such as HS 7305.11 rods includes destinations in the Middle East, Southeast Asia and Europe, where construction and pool‑installation projects drive demand. Buyers typically require compliance with ISO 9001 quality management, ASTM A36 or EN 10210 material standards for carbon‑steel rods, and CE marking for products entering the EU market. Fasteners like nuts and pins are commonly inspected under HS chapter 73, with buyers requesting test reports for tensile strength, hardness (Rockwell B 80‑100) and dimensional tolerance (±0.03 mm). Packaging for hardware items often involves bulk cartons or wooden crates, with container loading optimized for 20‑ft or 40‑ft units; Incoterms such as FOB or CIF are standard in the sector. Exporters from India also need to provide phytosanitary certificates for any timber‑based decking components to satisfy customs regulations in importing countries.

Sourcing from Shree Samarth Krupa - Buyer Guidance

When sourcing from Shree Samarth Krupa, request material test certificates that confirm the ERW steel rod meets the specified tensile strength and chemical composition (e.g., C ≤ 0.25 %). For nuts and pins, ask for hardness reports and thread tolerance certificates aligned with ISO 965‑1. The Deck Tube should be accompanied by moisture‑content data and, if timber, a phytosanitary clearance. Verify that any supplied samples match the dimensions and grades described, and confirm the supplier’s ability to provide ISO 9001 or equivalent quality system documentation before confirming large orders.

What are the material specifications for the Swimming Pool Safety Cover Installation Rod?

The rod is listed under HS 7305.11 and is fabricated from ERW carbon steel, a material commonly supplied with tensile strength around 400‑500 MPa and a surface coating for corrosion resistance.

Which HS code applies to the steel rod product?

The catalogue assigns HS code 7305.11 to the Swimming Pool Safety Cover Installation Rod, which falls under the category of steel bars and rods, hot‑rolled, carbon steel.

What typical grades are expected for the Barrel Nut and Slotted Nut?

In the fastener market, nuts of this type are usually produced to metric thread standards and meet grade 8.8 or 10.9 strength, with hardness values between Rockwell B 80‑100.

What documentation should a buyer request for the insulation pins?

Buyers should ask for material certificates confirming stainless‑steel or coated carbon‑steel composition, as well as electrical insulation test results and dimensional tolerance reports.

Are there standard packaging practices for these hardware items?

Hardware such as nuts, pins and rods are typically packed in bulk cartons or wooden crates, with container loading optimized for 20‑ft or 40‑ft containers; moisture‑proof liners are often used for flooring components.

Which markets commonly import these types of products from India?

Typical importers include construction firms in the Middle East, pool installers in Southeast Asia, and hardware distributors in Europe, all of which look for compliance with ISO 9001, ASTM or EN material standards.

What certifications are usually required for the Deck Tube used in flooring?

For timber‑based decking, buyers often require a phytosanitary certificate and may request compliance with ISO 14001 environmental management or CE marking if the product is sold in the EU.

What lead times are typical for steel rod shipments from India?

Lead times for carbon‑steel rods from Indian manufacturers generally range from 30 to 45 days after order confirmation, depending on production scheduling and container availability.