About Shenzhen Laimeisi Silicone Industry Co,.Ltd - Silicon Tubes Supplier in China

Shenzhen Laimeisi Silicone Industry Co,.Ltd is located in Shenzhen, China and lists 13 active products across silicone and rubber‑based categories. The catalogue includes clear silicone tubing, silicone dishwashing brushes, silicone ice‑ball molds, kitchen placemats, a bathroom soap‑holder plate classified under HS code 3924.90, hot‑melt adhesive silicone grease, flexible waterproof insulation rubber sheets, a clear silicon rubber membrane, a thermal flexible graphite sheet (HS code 3801.30, 99.5 % carbon), silicone mats, double‑sided heatsink tape, thin transparent silicone membrane rolls and silicone soft tubes.

The product set spans three HS‑code families: 3917‑xx for silicone tubes and sheets, 3924.90 for molded plastic‑silicone accessories, and 3801.30 for flexible graphite sheets. Each item is described by its material - for example the graphite sheet uses natural flexible graphite, while the bathroom holder uses waterproof silicone - providing clear technical identifiers for buyers.

Product Range and Specialties of Shenzhen Laimeisi Silicone Industry Co,.Ltd

The listed items cover common silicone forms such as clear tubing, soft tubes, transparent membrane rolls and rigid plates, as well as ancillary products like silicone brushes, mops, duster heads and kitchen mats. In the silicone market, tubing is typically supplied in Shore A 40‑70 hardness, with temperature ratings from - 50 °C to +200 °C and may meet FDA‑204 food‑contact specifications. Silicone plates and mats are often produced in 0.5‑2 mm thickness, with tensile strength around 5‑7 MPa and elongation at break above 200 %. Graphite flexible sheets are generally graded by carbon purity (commonly 99‑99.9 %) and sheet thickness from 0.2‑1 mm, used for thermal management in electronics. Double‑sided heatsink tape usually carries an adhesive strength of 0.5‑1 N/cm² and a thermal conductivity of 2‑5 W/m·K. Rubber insulation sheets are supplied in 1‑5 mm thickness, with compression set below 30 % after 24 h at 70 °C.

Trade and Export Information - Shenzhen Laimeisi Silicone Industry Co,.Ltd

China is a major exporter of silicone components, supplying automotive, consumer electronics, medical device and kitchenware markets worldwide. Silicone tubing and plates fall under HS chapter 39, where customs authorities often request test reports for Shore hardness, tensile strength and temperature stability. Flexible graphite sheets (HS 3801.30) are commonly shipped to Southeast Asian electronics assemblers and European thermal‑management firms, with buyers usually requiring REACH registration and an MSDS. Typical import destinations for these products include the United States, Germany, Japan and South Korea, with shipments packed in 20‑foot or 40‑foot containers using export‑grade cardboard or wooden pallets. Common certifications requested by importers are FDA compliance for food‑contact silicone, LFGB for European kitchen goods, and ISO 9001 quality‑management certification from the supplier’s production system.

Sourcing from Shenzhen Laimeisi Silicone Industry Co,.Ltd - Buyer Guidance

When evaluating Shenzhen Laimeisi’s silicone tubing, request a material safety data sheet, a certificate of compliance with FDA‑204 or EU LFGB standards, and test data showing Shore A hardness, tensile strength and operating temperature range. For the graphite sheet, ask for a carbon‑purity assay, thickness tolerance sheet and a thermal‑conductivity report to confirm suitability for heat‑sink applications. Verify that adhesive tapes include a release‑liner specification and adhesive shear strength values before confirming order quantities. Request sample units packaged in standard export cartons to assess dimensions and surface finish, and confirm that the supplier can provide certificates of conformity for REACH or RoHS if the end market demands them.

What silicone products does Shenzhen Laimeisi list in its catalogue?

The catalogue includes clear silicone tubing, silicone soft tubes, transparent membrane rolls, silicone plates, silicone mats, kitchen placemats, dishwashing brushes, ice‑ball molds, waterproof silicone bathroom accessories and related rubber sheets.

Which HS codes are associated with the listed products?

Two products have specific HS codes: the bathroom soap‑holder plate is classified under 3924.90, and the thermal flexible graphite sheet is under 3801.30. Other silicone items fall under the broader HS 3917‑xx family for tubes and sheets.

What material specifications are typical for silicone tubing?

Silicone tubing is usually produced in Shore A 40‑70 hardness, tolerates - 50 °C to +200 °C, and may meet FDA‑204 food‑contact standards with tensile strength around 5 MPa.

What certifications should a buyer request for the graphite sheet?

Buyers normally request a REACH registration, a carbon‑purity certificate confirming 99.5 % carbon content, and an MSDS outlining thermal stability and safety handling.

How are the silicone kitchen mats typically packaged for export?

Export packs commonly use double‑wall cardboard cartons, stacked in layers of 10‑20 units per carton, and loaded on 20‑ft or 40‑ft containers with wooden pallets for stability.

What documentation is advisable before ordering the hot‑melt adhesive?

Request a technical data sheet detailing the adhesive’s temperature range, viscosity, and cure time, as well as any relevant safety data sheet and compliance with ISO 9001 quality‑management processes.

What are the typical lead times for silicone accessories from China?

Lead times for silicone accessories such as brushes, plates and mats usually range from 15 to 30 days after order confirmation, depending on order volume and required certifications.

Is a sample available for the silicone soft tube?

The supplier can provide a sample tube packaged in a small export box; buyers should request a sample to verify dimensions, transparency and hardness before finalizing bulk orders.