About Shenzhen Kingsun New Energy Co., Ltd. - Electric Lamps, Tubes, Bulbs, Lights & Light Fittings Supplier in China

Shenzhen, China hosts Shenzhen Kingsun New Energy Co., Ltd., which currently lists five active products across its catalogue. The company’s top categories include electric lamps and light fittings, electric chokes and ballasts, building fittings, and solar panels, indicating a focus on both illumination and renewable‑energy hardware.

The published product list comprises a low‑pressure sodium lamp, an electronic ballast, generic lighting fixtures, a solar panel, and a solar charging controller. Each entry aligns with the broader categories of lighting equipment and photovoltaic accessories, but no additional product variants or HS‑code details are provided in the source data.

Product Range and Specialties of Shenzhen Kingsun New Energy Co., Ltd.

The low‑pressure sodium lamp is typically offered in wattages ranging from 70 W to 400 W, with a color temperature around 1900 K and luminous efficacy near 120 lm/W. Electronic ballasts for such lamps usually conform to IEC 60947‑3 and operate at input voltages of 220‑240 V, providing dimming or instant‑start functions. Lighting fixtures listed under the catalogue may include indoor and outdoor housings, often rated IP20 to IP65 depending on intended environment. Solar panels exported from China are commonly monocrystalline or polycrystalline modules with efficiencies between 15 % and 22 % and nominal power outputs of 250 W to 550 W per panel. Solar charging controllers are generally either PWM or MPPT types, managing input voltages up to 150 V and output currents up to 30 A, with typical protection features such as over‑voltage, over‑current and short‑circuit safeguards.

Trade and Export Information - Shenzhen Kingsun New Energy Co., Ltd.

China remains a major exporter of lighting and photovoltaic equipment, supplying markets in Southeast Asia, the Middle East, Africa and Europe. Buyers of low‑pressure sodium lamps and electronic ballasts often require compliance with IEC 60598 for luminaires and IEC 60947 for control gear, while photovoltaic modules are checked against IEC 61730 and IEC 61215 standards. Common certifications requested by importers include CE marking, UL listing and ISO 9001 quality‑management registration, which should be verified in supplier documentation. Shipping of these goods typically uses 20‑ft or 40‑ft containers, with pallets wrapped in shrink film; Incoterms such as FOB Shenzhen or CIF destination are standard in the sector.

Sourcing from Shenzhen Kingsun New Energy Co., Ltd. - Buyer Guidance

When sourcing low‑pressure sodium lamps, request the lamp’s lumen output, wattage rating and a test report confirming compliance with IEC 60598. For electronic ballasts, obtain the input voltage range, power factor and a certification copy (CE or UL) to confirm safety compliance. Solar panels should be supplied with a module data sheet showing cell type, efficiency, power tolerance and a test report for IEC 61730. For the solar charging controller, ask for the maximum input voltage, output current rating and proof of MPPT or PWM functionality, together with any relevant safety certifications. Verify that packaging meets international standards for moisture protection, typically double‑wall corrugated boxes with inner cushioning, and confirm container loading plans before finalising the order.

What types of lighting products does Shenzhen Kingsun New Energy list?

The catalogue includes a low‑pressure sodium lamp, an electronic ballast and generic lighting fixtures, all falling under the electric lamp and light‑fitting category.

Are solar panels offered with technical specifications?

The supplier lists a solar panel product; buyers should request a data sheet that details cell technology, nominal power, efficiency and IEC compliance before purchase.

Which certifications are commonly required for the listed products?

Importers typically ask for CE or UL certification for lamps and ballasts, and IEC 61730 compliance for solar panels; these should be provided by the supplier on request.

What is the usual minimum order quantity for the electronic ballast?

While the catalogue does not specify MOQ, the lighting ballast market often starts at 100 units per order, subject to supplier confirmation.

What lead time can buyers expect for the solar charging controller?

Lead times for solar controllers from Chinese manufacturers generally range from 30 to 45 days after order confirmation, depending on production scheduling.

How are the products packaged for international shipment?

Standard practice is to pack each unit in cardboard boxes with internal cushioning, then stack the boxes on Euro‑pallets wrapped in shrink film for container loading.

Which Incoterms does Shenzhen Kingsun New Energy commonly use?

Typical Incoterms for Chinese lighting and solar equipment are FOB Shenzhen for buyers who arrange freight, or CIF destination for those preferring the supplier to handle shipping costs.