About Shenzhen Jiemeihe Electronic Co. - LED Lighting Supplier in China

Shenzhen Jiemeihe Electronic Co. is an electronics supplier based in Shenzhen, Guangdong Province, China, operating with an active catalogue of 5 listed products. Its entire range sits within the lighting equipment category, covering LED high bay light fittings and waterproof LED underwater lights for industrial and outdoor applications. The catalogue spans power ratings from 12 W up to 300 W, with lumen output figures reaching 12,000 lm on the flagship 120 W model, and includes both AC mains and 12 V/24 V low-voltage variants. Product references indicate the use of established component brands such as Meanwell drivers and Bridgelux LED chips, including a 45 mil chip configuration on the 300 W industrial unit. The supplier is positioned in the Pearl River Delta manufacturing corridor, the principal Chinese cluster for LED packaging, driver electronics and finished luminaire assembly.

Product Range and Specialties of Shenzhen Jiemeihe Electronic Co.

The supplier's catalogue is concentrated on three functional groups: industrial LED high bay fittings (in 120 W, 150 W, 200 W and 300 W versions), a low-voltage 12 W IP68 LED underwater light, and the supporting driver/chip combinations that define each variant. Industrial LED high bay fittings in this wattage band typically use die-cast aluminium housings, tempered glass or polycarbonate diffusers, and are rated for ambient temperatures of -30 to +50 degrees Celsius with power factor above 0.9 and colour rendering index (CRI) values commonly in the 70-80 Ra range. Buyers in this category usually evaluate products by luminous efficacy (lm/W), with current-generation high bay LEDs typically delivering 110-160 lm/W, and by beam angle options (commonly 60, 90 or 120 degrees). The IP68 underwater light at 12 V/24 V DC is designed for fountain, pool and landscape installations, where the IP68 rating indicates continuous submersion capability beyond 1 metre, and stainless steel or ABS housings are standard. Common colour temperatures across these product types range from warm white (2700-3000 K) through cool white (4000-4500 K) to daylight (5000-6500 K).

Trade and Export Information - Shenzhen Jiemeihe Electronic Co.

LED lighting products exported from China fall under HS code 9405 (lamps and lighting fittings), with specific subheadings such as 9405.10 for chandeliers and ceiling lights, 9405.40 for other electric lamps, and 9405.42 covering LED-type fittings. Underwater LED lights typically classify under 9405.41 or 9405.42 depending on whether they are designed for household or general use. The principal importing regions for Chinese-made LED high bay and underwater lighting are the European Union, North America, the Middle East, Southeast Asia, and Latin America, with strong demand from warehousing, logistics, manufacturing plant, sports facility, and commercial real estate sectors. Certifications commonly required by buyers in this category include CE (mandatory for the EU under the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU), RoHS for restriction of hazardous substances, UL or ETL for the United States and Canada, SAA for Australia, and TUV/GS marks in European markets, several of which appear directly in the supplier's product naming conventions. Standard export packaging for LED fittings typically uses reinforced cartons with foam inserts at 5-10 pieces per carton, palletised for 20 ft and 40 ft container loads, and Incoterms such as FOB Shenzhen, CIF and DDP are the most commonly negotiated terms with overseas buyers. China's export data shows LED lighting as one of the country's top electrical export categories by volume, with Shenzhen and the wider Guangdong region accounting for a substantial share of global LED luminaire production.

Sourcing from Shenzhen Jiemeihe Electronic Co. - Buyer Guidance

Buyers sourcing LED high bay and underwater lighting from this supplier should request the latest third-party test reports aligned to the destination market: CE-EMC and CE-LVD documents for Europe, UL/ETL listings for North America, and SAA approval for Australia. It is advisable to confirm the LM-80 or TM-21 lumen maintenance data for the Bridgelux or equivalent LED chips, the IP rating test certificate (especially the IP68 claim on the underwater unit, which requires testing to IEC 60529), and the Meanwell or equivalent driver's independent certification. Sample evaluation prior to bulk order is standard practice in this category, with attention to actual measured luminous flux versus the rated 12,000 lm figure, beam angle consistency, and thermal performance under continuous operation. Buyers should also verify warranty terms (typically 3-5 years for industrial LED high bays), confirm the IK impact rating for industrial environments, and request the photometric IES files for lighting design calculations. Pre-shipment inspection by a third-party agency such as SGS, Bureau Veritas or TUV is commonly arranged for orders above USD 10,000 to confirm quantity, labelling, and conformity to approved samples.

What product categories does Shenzhen Jiemeihe Electronic Co. supply?

The supplier lists 5 active products, all within LED lighting. The range covers industrial LED high bay light fittings at 120 W, 150 W, 200 W and 300 W, plus a 12 V/24 V 12 W IP68 waterproof LED underwater light. These products fall under HS code chapter 9405 for lamps and lighting fittings.

Which LED chip and driver brands are referenced in the catalogue?

Product names reference Bridgelux LED chips (including a 45 mil chip configuration on the 300 W unit) and Meanwell drivers on the 200 W high bay. Buyers should request the specific chip bin and driver model number, as these determine luminous efficacy, lumen maintenance and warranty terms.

What certifications should buyers request for these LED products?

Depending on the destination market, buyers typically request CE and RoHS for the European Union, UL or ETL for the United States and Canada, SAA for Australia, and TUV/GS for Germany. Several of these marks already appear in the supplier's product naming, but the actual certificate documents and test reports should be confirmed before order placement.

What is the typical IP rating and what does IP68 mean for the underwater light?

The underwater light is rated IP68, which under IEC 60529 indicates protection against continuous water submersion beyond 1 metre depth. Buyers should request the actual IP68 test report, confirm the rated submersion depth and duration, and verify the housing material (typically stainless steel 316 or reinforced ABS) for the intended installation environment.

What is the typical MOQ and lead time for LED high bay fittings?

MOQ for industrial LED high bay fittings from Chinese suppliers typically ranges from 50 to 500 pieces depending on wattage and customisation. Standard lead times are usually 15-25 days for production plus 5-10 days for export packaging and documentation, though buyers should confirm current figures directly with the supplier.

What packaging and container loading should buyers expect?

LED high bay fittings are typically packed in reinforced export cartons with foam or EPE inserts at 1-4 pieces per carton, then palletised. A 40 ft high-cube container commonly holds 3,000-6,000 mid-wattage high bay units depending on packaging configuration. Buyers should request the supplier's packing list and loading plan for their specific order quantity.

Which documents are typically required for export of LED lighting from China?

Standard export documentation includes the commercial invoice, packing list, bill of lading or airway bill, certificate of origin (Form E or Form F for tariff preference where applicable), and the relevant product conformity certificates. For destination markets requiring pre-shipment inspection, an SGS or equivalent third-party inspection report is usually arranged by the buyer.

How should buyers verify the 12,000 lm claim on the 120 W high bay?

Buyers should request the LM-79 photometric test report from an accredited laboratory, which provides total luminous flux, efficacy, CCT, CRI and beam angle data measured under standard conditions. Independent verification by a third-party testing body such as TUV, SGS or Intertek is recommended for first orders to confirm the rated performance against actual output.