About Shandong Saier Chemical Technology Development Co., Ltd. - Aromatic Chemicals Supplier in China

China, specifically Shandong province, lists six active products under the categories Aromatic Chemicals, Petroleum By‑Products and Industrial Chemicals. The catalogue includes four aromatic solvent blends named S‑100, S‑150, S‑150ND and S‑200, a heat‑transfer oil identified as LQC‑320, and the aromatic hydrocarbon durene. Each entry is recorded under the broader classification of aromatic solvents or specialty oils used in downstream industrial processes.

The product S‑200 is recorded with HS code 2707.50 and is described as an Aromatic Hydrocarbon Solvent Blend covering the C9‑C12 aromatic range. The remaining solvents (S‑100, S‑150, S‑150ND) and the heat‑transfer oil do not have HS codes listed in the supplied data, nor are material specifications provided beyond the product names.

Product Range and Specialties of Shandong Saier Chemical Technology Development Co., Ltd.

The supplier’s aromatic solvents - S‑100, S‑150, S‑150ND and S‑200 - are typical C9‑C12 aromatic hydrocarbon blends used as paint thinners, cleaning agents and extraction media. In the industry such solvents are usually specified by purity (often ≥ 99 %), flash point (generally > 30 °C), aromatic content (70‑90 % total aromatics) and compliance with ASTM D86 (distillation) or ISO 4735 (petroleum products). Heat‑transfer oil LQC‑320 falls into the high‑temperature industrial oil segment; buyers normally require a viscosity grade (e.g., 10 cSt at 40 °C), a pour point below ‑20 °C and a flash point above 220 °C, with test methods such as ASTM D445. Durene (1,2,4,5‑tetramethylbenzene) is a high‑purity aromatic used as a feedstock for polymerisation; typical specifications call for ≥ 99 % purity and low moisture content (< 0.05 %).

Trade and Export Information - Shandong Saier Chemical Technology Development Co., Ltd.

China is a major exporter of aromatic solvents and petroleum‑derived oils, with primary destinations in Southeast Asia, the European Union and North America. HS code 2707.50 classifies the product as a petroleum oil or oil obtained from bituminous minerals, which triggers standard customs documentation, safety data sheets (SDS) and, for many importing regions, REACH registration or equivalent chemical safety compliance. Export shipments are commonly packed in 20 ft or 40 ft containers using 55‑gal drums or intermediate bulk containers (IBCs), and Incoterms such as FOB Shanghai or CIF Rotterdam are typical. Buyers frequently request ISO 9001 quality management certificates, third‑party analysis reports (GC‑MS, GC‑FID) and conformity to ASTM or ISO standards before clearance.

Sourcing from Shandong Saier Chemical Technology Development Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a full product data sheet that lists purity, flash point, boiling range, viscosity (for the oil) and the material safety data sheet. Verify that the aromatic solvents meet ASTM D86 or ISO 4735 specifications and that durene complies with ≥ 99 % purity specifications. Ask for third‑party test reports, REACH registration evidence (if importing to the EU) and any ISO quality certificates the supplier can provide. Typical minimum order quantities for solvent blends range from 1 metric ton per shipment, with lead times of 4‑6 weeks after order confirmation; heat‑transfer oil is often shipped in 200 kg drums or 1 000 L IBCs.

What aromatic solvent products does Shandong Saier list?

The catalogue includes four aromatic solvent blends: S‑100, S‑150, S‑150ND and S‑200, the latter identified with HS code 2707.50 and described as a C9‑C12 aromatic hydrocarbon blend.

Is there any HS code information for the listed products?

Only the S‑200 solvent is provided with an HS code (2707.50). The other solvents and the heat‑transfer oil do not have HS codes in the supplied data.

What typical specifications should buyers check for the aromatic solvents?

Buyers usually verify purity (≥ 99 %), flash point (typically > 30 °C), total aromatic content (70‑90 %) and compliance with ASTM D86 or ISO 4735 distillation standards.

What key parameters define the heat‑transfer oil LQC‑320?

Heat‑transfer oils are generally evaluated by viscosity at 40 °C (e.g., 10 cSt), pour point (often < ‑20 °C) and flash point (usually > 220 °C). Buyers should request the specific viscosity grade and thermal stability data for LQC‑320.

Which certifications are commonly required for aromatic chemicals exported from China?

Importers typically request an ISO 9001 quality management certificate, a current safety data sheet (SDS), REACH registration or equivalent chemical safety documentation, and third‑party test reports (GC‑MS or GC‑FID).

What packaging formats are standard for these chemicals?

Aromatic solvents and heat‑transfer oils are commonly packed in 55‑gal steel drums, 200 kg IBCs or bulk containers suitable for 20 ft or 40 ft ocean containers.

What are typical lead times and minimum order quantities?

Lead times of 4‑6 weeks are standard after order confirmation, and minimum order quantities usually start at 1 metric ton per shipment for solvent blends.

How can a buyer verify product compliance before shipment?

Buyers should request the product data sheet, safety data sheet, third‑party laboratory analysis, and any applicable ISO or REACH certificates, then compare those documents against the specifications required for their market.