About Scube Fasteners - Fasteners Supplier in India

India‑based Scube Fasteners lists sixteen active product lines covering bolts, nuts, screws, washers and related fasteners. The catalogue is organised under HS chapter 73, primarily codes 7318.15 for standard bolts and nuts, 7318.14 for carriage bolts, 7318.19 for anchor fasteners and 7318.29 for customised items. Materials are specified as carbon steel grades ranging from 4.8 to 12.9, stainless steel grades 304 and 316, and alloy steel where higher tensile classes are required. Each product entry includes the relevant HS code when available, allowing clear customs classification for international shipments.

The product set includes standard and customised fasteners, hex bolts, flanged bolts, socket bolts, carriage bolts, stud bolts, eye bolts, U‑bolts, hex nuts, wing nuts, washers, machine screws, self‑drilling screws, grub screws, anchor fasteners and bespoke fastener solutions. Where material data are supplied, carbon‑steel options cover grades 4.8, 8.8, 10.9 and 12.9, while stainless‑steel options are limited to SS 304 (A2‑70) and SS 316 (A4‑80). Zinc‑plated finishes appear on several carbon‑steel items, and alloy‑steel options are noted for high‑strength applications.

Product Range and Specialties of Scube Fasteners

The catalogue spans a conventional fastener portfolio that matches typical industrial specifications. Hex, flanged and socket bolts are offered in carbon‑steel grades 8.8 and 10.9 as well as stainless‑steel 304/316, which aligns with ISO 898‑1 tensile‑strength classes and ASTM A193 or DIN 933 standards. Washers, nuts and wing nuts follow standard metric thread dimensions (M4‑M24) and are commonly supplied in plain, zinc‑plated or stainless variants. Customised fasteners under HS 7318.29 allow specification of length, thread pitch and finish, a practice typical for OEMs requiring bespoke tolerances. Typical industry grades for anchor fasteners (HS 7318.19) include zinc‑plated carbon steel that meets ASTM A307 requirements for corrosion resistance in concrete applications.

Trade and Export Information - Scube Fasteners

India is a major exporter of metric fasteners, with key markets in automotive manufacturing hubs such as Europe, North America and Southeast Asia. HS 7318.15 products are routinely shipped in 20‑foot containers at an average payload of 22 tons, packed in wooden crates of 1,000 pcs per crate. Buyers usually request ISO 9001 quality‑management certification, ISO 14001 environmental compliance and, where applicable, CE marking for EU entry. Common regulatory checks include material test reports (MTR) confirming tensile strength, hardness and chemical composition, as well as coating thickness verification for zinc‑plated items. Indian exporters often employ FOB or CIF Incoterms, with freight forwarding services handling container loading and customs documentation.

Sourcing from Scube Fasteners - Buyer Guidance

When sourcing from Scube Fasteners, request a material test report that references ISO 898‑1 or ASTM A193 standards for the specific grade cited in the catalogue. Verify that the HS code on the commercial invoice matches the product description (e.g., 7318.15 for standard bolts) to avoid customs delays. Ask for samples of the coating finish (zinc plating thickness or stainless‑steel passivation) and confirm compliance with any required regional standards such as CE or RoHS before placing a bulk order.

What fastener categories does Scube Fasteners list in its catalogue?

The supplier lists bolts, nuts, screws, washers and related fasteners, covering sixteen distinct product lines including hex bolts, flanged bolts, socket bolts, carriage bolts, stud bolts, eye bolts, U‑bolts, hex nuts, wing nuts, machine screws, self‑drilling screws, grub screws, anchor fasteners and customised solutions.

Which HS codes are associated with the products offered by Scube Fasteners?

Products are classified under HS 7318.15 for most bolts and nuts, HS 7318.14 for carriage bolts, HS 7318.19 for anchor fasteners and HS 7318.29 for customised fastener orders. Items without a listed HS code should be clarified with the supplier before shipment.

What materials are specified for the bolts and screws?

Materials include carbon‑steel grades ranging from 4.8 to 12.9, stainless‑steel grades 304 and 316, and alloy‑steel options for high‑strength applications. Zinc‑plated carbon steel is noted for several items, particularly anchor fasteners.

Are there standard specifications that buyers should check for these fasteners?

Buyers should reference ISO 898‑1 for mechanical properties, ASTM A193 or DIN 933 for dimensional tolerances, and verify coating standards such as zinc‑plating thickness (typically 5‑15 µm) where applicable.

What documentation is typically required before importing these fasteners?

Typical documents include a commercial invoice with the correct HS code, a material test report, a certificate of origin, and any relevant certifications such as ISO 9001 or CE marking depending on the destination market.

What packaging formats are common for the fasteners listed?

Fasteners are usually packed in wooden crates or cardboard boxes, with standard quantities of 1,000 pieces per crate for bulk shipments. Containers are loaded in 20‑foot or 40‑foot units, with total weight generally between 20 and 25 tons per container.

What lead times are typical for standard versus customised fastener orders?

Standard items such as hex bolts or washers often have a lead time of 2‑4 weeks from order confirmation, while customised fasteners under HS 7318.29 may require 6‑8 weeks due to tooling and specification verification.

Which markets commonly import the types of fasteners supplied by Scube Fasteners?

Typical import markets include automotive manufacturers in Europe, construction and infrastructure firms in the Middle East, machinery producers in North America and equipment assemblers in Southeast Asia.