About Sabir Industries - Zinc Supplier in Pakistan

Pakistan‑based Sabir Industries lists five active products in its catalogue. The portfolio includes stainless steel doors and windows (HS 7308.30) made from SS 304/SS 316, zinc scrap (HS 7902.00) classified as mixed grade, zinc dust (HS 7901.11) with a minimum of 50 % Zn, zinc concentrate (HS 2608.00) containing roughly 60 % Zn from sphalerite, and calcium fluoride (CaF2) ore without a disclosed HS code. Each entry is tied to a specific HS‑code family, allowing buyers to locate the items quickly in customs databases. The supplier’s trust tier is listed as “harbor”, indicating a moderate level of verification in trade platforms.

The stainless‑steel doors and windows are described as fabricated from SS 304 or SS 316, materials commonly used for corrosion‑resistant architectural components. Zinc scrap is noted as a mixed‑grade material, typically containing assorted alloys and impurities that are later re‑smelted. Zinc dust is specified as non‑alloy with a minimum zinc content of 50 %, a figure that aligns with standard industrial grades used in galvanising and alloy production. Zinc concentrate is presented with an approximate 60 % zinc metal content, derived from sphalerite ore, while the calcium fluoride ore is listed without further technical detail. These product descriptors provide the baseline data needed for technical assessment and compliance checks.

Product Range and Specialties of Sabir Industries

The catalogue covers architectural steel components and several zinc‑based raw materials. Stainless‑steel doors and windows fall under HS chapter 73 and are fabricated from SS 304 or SS 316, grades that meet ASTM A240 and EN 1090 standards for strength and fire resistance. Zinc scrap (HS 7902) is a secondary metal stream usually sorted into grades such as 99 % pure or mixed‑grade, with typical impurity limits of 0.5 % lead and 0.1 % cadmium. Zinc dust (HS 7901) is sold in grades ranging from 50 % to 99 % Zn, with particle sizes measured in microns and moisture content below 0.5 % for downstream processing. Zinc concentrate (HS 2608) is a primary concentrate containing 55‑65 % Zn, often shipped in bulk bags with moisture under 2 % and tested for heavy‑metal limits. Calcium fluoride ore, classified under HS 2505, is a mineral used in steelmaking and optics, typically graded by purity (e.g., 95 % CaF2) and particle size.

Trade and Export Information - Sabir Industries

Pakistan is a recognized exporter of steel building components and base‑metal commodities such as zinc scrap, dust and concentrates. Buyers in the Middle East, South‑East Asia, and the European Union frequently import these categories, using HS 7308 for steel doors, HS 7902/7901 for zinc secondary products, and HS 2608 for primary concentrates. Standard export documentation includes a commercial invoice, packing list, Certificate of Origin, and a chemical analysis report for zinc products. Common buyer‑required certifications are ISO 9001 for quality management, ISO 14001 for environmental compliance, and, where applicable, CE marking or REACH registration for steel components. Shipping is typically performed in 20‑ft or 40‑ft containers for doors and windows, bulk bags for zinc concentrate, and drums or bulk bags for zinc dust, with freight terms often quoted as FOB Karachi or CIF destination ports.

Sourcing from Sabir Industries - Buyer Guidance

When sourcing stainless‑steel doors or windows, request the product data sheet specifying thickness (e.g., 2 mm  -  6 mm), surface finish (e.g., brushed or polished), and compliance certificates such as ASTM A240 or EN 1090. For zinc scrap, ask for a detailed assay report showing impurity levels for lead, cadmium, and copper, and verify that the material meets the buyer’s recycling specifications. Zinc dust shipments should be accompanied by a particle‑size distribution report and moisture analysis, confirming the minimum 50 % Zn content. Zinc concentrate buyers normally require a bulk assay confirming 60 % Zn, sulfur and iron limits, and a moisture content below 2 %. For calcium fluoride ore, request a purity analysis and a mineralogical report indicating CaF2 percentage and any hazardous impurity content. In all cases, confirm the HS code used on the commercial invoice matches the product description to avoid customs delays.

What HS codes are used for Sabir Industries' products?

The stainless‑steel doors and windows are listed under HS 7308.30, zinc scrap under HS 7902.00, zinc dust under HS 7901.11, zinc concentrate under HS 2608.00, and calcium fluoride ore falls under the mineral HS chapter (commonly HS 2505).

Which material grades are offered for the steel doors and windows?

The doors and windows are fabricated from stainless‑steel grades SS 304 or SS 316, both of which meet ASTM A240 specifications for corrosion resistance and structural strength.

What is the minimum zinc content for the zinc dust product?

The zinc dust is specified as non‑alloy with a minimum zinc content of 50 % by weight, which aligns with standard industrial grades used for galvanising.

How is the zinc concentrate characterized?

The concentrate contains approximately 60 % zinc metal derived from sphalerite ore, and buyers typically request a bulk assay confirming this grade along with limits on iron and sulfur.

Are there any typical certifications buyers should request from Sabir Industries?

Buyers should request ISO 9001 quality‑management certification, ISO 14001 environmental compliance, and, for steel products, CE marking or REACH compliance where required by the destination market.

What packaging formats are used for the zinc products?

Zinc scrap is usually bundled in bulk bags or containers, zinc dust is shipped in sealed drums or bulk bags to prevent moisture ingress, and zinc concentrate is packed in large polypropylene bags with moisture‑barrier liners.

Which international markets commonly import these product categories from Pakistan?

Typical importers include countries in the Middle East, South‑East Asia, the European Union, and North Africa, where steel building components and zinc raw materials are used in construction, automotive, and galvanising industries.

What documentation is needed to clear customs for the calcium fluoride ore?

Standard documentation includes a commercial invoice, packing list, Certificate of Origin, and a mineral assay report indicating CaF2 purity; the appropriate HS code from chapter 25 should be declared.