About QiNgdao Meet Moulds Co., Ltd. - Dies & Mouldings Supplier in China

QiNgdao Meet Moulds Co., Ltd. is based in China and currently lists five active products. The catalogue focuses on automotive moulds, specifically auto bumper, fender, head lamp, dashboard and sunroof moulds. Each item falls under the HS code 8480.41 for general moulds or 8480.71 for moulds used in the manufacture of parts such as head lamps and sunroofs. The listed materials include tool steels P20, H13 and S136, which are standard for high‑temperature and high‑wear applications. The supplier’s primary category is Dies & Mouldings, covering both cavity and core components for automotive parts.

The product titles indicate moulds designed for injection‑moulding of automotive exterior and interior components. The auto bumper and fender moulds are classified under HS 8480.41, while the head lamp and sunroof moulds use HS 8480.71, reflecting the different technical requirements for lighting housings versus body panels. Materials such as pre‑hardened P20 and H13 provide hardness levels typically ranging from 45‑55 HRC for P20 and 48‑55 HRC for H13. The catalogue does not provide dimensions, but molds of this type are usually supplied in sections sized to fit standard 20‑ft or 40‑ft containers for export.

Product Range and Specialties of QiNgdao Meet Moulds Co., Ltd.

The catalogue offers five specific automotive moulds: auto bumper, fender, head lamp, dashboard and sunroof. All are manufactured from tool steels P20, H13 and S136, which are common in the mould industry for their wear resistance and heat‑treatment capability. In the broader mould market, P20 is often supplied in a pre‑hardened condition with a typical hardness of 45‑48 HRC, while H13 is used for high‑temperature cores with hardness up to 55 HRC. S136, a high‑carbon chromium steel, is selected for its superior corrosion resistance and hardness above 55 HRC. Buyers generally look for moulds with surface finish Ra ≤ 0.8 µm and dimensional tolerances within ±0.05 mm for critical automotive components.

Trade and Export Information - QiNgdao Meet Moulds Co., Ltd.

China is a major exporter of automotive moulds, supplying OEMs and Tier‑1 suppliers in Europe, North America, Japan and Southeast Asia. HS chapter 84 (including 8480.41 and 8480.71) is subject to customs inspection for material composition and heat‑treatment certification. Typical import requirements include a material test report, hardness certification, and compliance with ISO 9001 quality management systems, although the supplier’s specific certifications are not listed.

Logistically, moulds of the dimensions described are packed in wooden crates or steel frames, often with moisture‑resistant liners, and shipped under CIF or FOB terms. Container load planning usually allows two to three large moulds per 20‑ft container, depending on size, or up to six per 40‑ft container. Buyers frequently request pre‑shipment inspection reports such as SGS or Bureau Veritas to verify conformity with the specified steel grades and heat‑treatment.

Sourcing from QiNgdao Meet Moulds Co., Ltd. - Buyer Guidance

When sourcing from QiNgdao Meet Moulds Co., Ltd., buyers should request material certificates for P20, H13 or S136, including chemical composition and hardness test results. A sample of the mould surface finish (Ra value) and a dimensional drawing with tolerance specifications are useful for verification. It is advisable to obtain a third‑party inspection report confirming the heat‑treatment process and to confirm the packaging method to avoid damage during transit. Clarify the lead time for each mould type and the minimum order quantity, which is often one complete mould per part.

What types of automotive moulds does QiNgdao Meet Moulds Co., Ltd. offer?

The supplier lists five mould types - auto bumper, auto fender, auto head lamp, auto dashboard and auto sunroof - each classified under HS codes 8480.41 or 8480.71 and made from tool steels P20, H13 or S136.

Which HS codes apply to the moulds in the catalogue?

Auto bumper, fender and dashboard moulds use HS code 8480.41, while head lamp and sunroof moulds are listed under HS code 8480.71.

What material grades are used for these moulds?

The moulds are produced from tool steel grades P20, H13 and S136; P20 is typically pre‑hardened to 45‑48 HRC, H13 to 48‑55 HRC, and S136 exceeds 55 HRC with high chromium content.

Are any certifications mentioned for the supplier?

No certifications are provided in the supplied information; buyers should request relevant certificates such as ISO 9001 or ISO/TS 16949 before purchase.

What documentation should a buyer request before ordering?

Buyers should ask for a material test report, hardness certification, surface‑finish measurement (Ra), a dimensional drawing with tolerances, and a third‑party inspection report.

What are typical packaging and shipping methods for these moulds?

Moulds are usually packed in reinforced wooden crates or steel frames with moisture‑resistant liners and shipped in 20‑ft or 40‑ft containers under CIF or FOB terms.

What is the usual lead time and minimum order quantity?

Lead times vary by mould type but generally range from 30 to 60 days; the minimum order is typically one complete mould per automotive part.

Which markets commonly import Chinese automotive moulds?

Major import destinations include Europe (e.g., Germany, France), North America (USA, Canada), Japan and Southeast Asian countries such as Thailand and Vietnam, where automotive manufacturers source moulds for mass production.