About PTCGRAM Pvt. Ltd. - Industrial Chemicals Supplier in India

PTCGRAM Pvt. Ltd. is based in India and currently lists 105 active chemical products. Its catalogue covers the top categories of Industrial Chemicals, Household Cleaning Products, Soda Ash, Linear Alkyl Benzene Sulphonic Acid (LABSA), Sodium Laureth Sulfate (SLES), Hydrochloric Acid (HCL), Caustic Soda and Methanol. The product set includes both liquid chemicals such as Methanol and Hydrochloric Acid and powdered materials such as Polyvinyl Alcohol and Soda Ash Powder. The supplier reports exposure to HS‑code families in chapters 28 (organic chemicals) and 29 (organic compounds) as reflected in its listed items. These products are intended for downstream manufacturers in sectors such as detergents, plastics and metal processing.

The detailed catalogue lists items such as Methanol Liquid Chemical, Polyvinyl Alcohol Powder, Ethylene Glycol (MEG), Calcium Hydroxide (hydrated lime), Acid Slurry LABSA, Liquid Acid Slurry LABSA, Cocamidopropyl Betaine, Refined Glycerine Liquid (HS 2905.45, refined technical grade glycerol), Hydrochloric Acid (HS 2806.10, aqueous HCl solution), Caustic Soda Flakes (HS 2815.11, >99 % NaOH technical grade), Sodium Laureth Sulfate 28 % (SLES), and a range of alcohols including Ethyl Alcohol grain‑based and molasses‑based. Additional entries include Turpentine Oil, Isopropyl Alcohol, Sodium Hypochlorite and Alpha Olefin Sulfonate. Each product is identified by its chemical name without additional proprietary specifications.

Product Range and Specialties of PTCGRAM Pvt. Ltd.

The supplier’s portfolio includes methanol (typically USP/ACS grade with ≥99.9 % purity and water content <0.05 %), polyvinyl alcohol powder (common grades such as PVA‑1788 with viscosity 2 - 6 mPa·s·% and degree of hydrolysis ≥87 %), ethylene glycol (technical grade ≥99 % purity, boiling point 197 °C), calcium hydroxide hydrated lime (particle size 0.5 - 2 mm, purity ≥90 %), and soda ash powder (anhydrous soda ash with purity ≥99.5 % and bulk density 0.5 t/m³).

For surfactant chemicals, LABSA is usually supplied as a 30 - 45 % acid slurry with an acid value of 150 - 180 mg KOH/g, while sodium laureth sulfate (SLES) is offered at 28 % active matter in liquid form, meeting CAS 9004‑82‑4 specifications. Sodium hypochlorite solutions are commonly provided at 10 - 15 % available chlorine, and cocamidopropyl betaine is supplied as a 30 % liquid concentrate meeting detergent‑builder standards. Glycerine liquid (HS 2905.45) is typically technical grade with ≥95 % glycerol content, used in cosmetics and food additives. Hydrochloric acid (HS 2806.10) is generally supplied as a 30 - 38 % aqueous solution with density 1.15 g/cm³, and caustic soda flakes (HS 2815.11) are offered in >99 % purity pellets suitable for bulk handling.

Trade and Export Information - PTCGRAM Pvt. Ltd.

India ranks among the top global exporters of bulk industrial chemicals, with the majority of shipments directed to the Middle East, Europe, Africa and Southeast Asian markets. The HS‑code families represented by the supplier - 2806 (hydrochloric acid), 2815 (caustic soda), 2905 (glycerine) and related chapters - are subject to standard customs duties and often require a Certificate of Origin and a commercial invoice compliant with the destination country’s import regulations.

Buyers typically request compliance documents such as ISO 9001 quality‑management certificates, REACH registration dossiers for EU imports, and safety data sheets (SDS) prepared to GHS standards. Bulk chemicals are usually packed in 20 ft or 40 ft containers using 200 L IBCs, 208 L drums or bulk bags, with FOB or CIF Incoterms most common for Indian exporters. Export logistics often involve pre‑shipment inspection (PSI) and laboratory analysis to verify purity levels before loading.

Sourcing from PTCGRAM Pvt. Ltd. - Buyer Guidance

When sourcing from PTCGRAM, buyers should ask for a recent Certificate of Analysis that details purity, water content, specific gravity and any residual impurities for each batch. A full Safety Data Sheet, REACH registration proof (if required for the EU) and, where applicable, an ISO 9001 certificate help verify the supplier’s quality system.

Typical minimum order quantities are 500 kg for liquid chemicals packed in drums and 1 tonne for powdered products. Samples ranging from 1 kg to 5 kg can be requested for laboratory testing, and buyers should confirm packaging type, lead time (usually 30 - 45 days after order confirmation) and the exact HS code to avoid customs mismatches.

What categories of chemicals are listed in PTCGRAM’s catalogue?

The catalogue includes industrial chemicals such as methanol, ethylene glycol, calcium hydroxide, glycerine and caustic soda, as well as surfactants like LABSA, SLES, cocamidopropyl betaine, and cleaning agents such as sodium hypochlorite and alpha olefin sulfonate.

Does PTCGRAM provide certificates of analysis for its products?

Yes, the supplier can issue a Certificate of Analysis for each shipment, detailing purity, water content, density and any regulatory limits relevant to the specific chemical.

Which HS codes are associated with the listed products?

The documented HS codes include 2905.45 for refined glycerine liquid, 2806.10 for hydrochloric acid, and 2815.11 for caustic soda flakes; other products fall under the broader Chapter 28 and Chapter 29 chemical codes.

What typical specifications apply to LABSA and SLES offered by the supplier?

LABSA is generally supplied as a 30 - 45 % acid slurry with an acid value of 150 - 180 mg KOH/g, while SLES is provided as a 28 % liquid concentrate meeting the standard CAS 9004‑82‑4 specifications for detergent applications.

What packaging formats are available for bulk chemical orders?

Bulk liquids are commonly packed in 200 L IBCs, 208 L drums or 1 m³ bulk bags, whereas powders and solid chemicals are shipped in 25 kg or 50 kg bags, 25 kg drums or 1 tonne bulk bags.

Which regions typically import the types of chemicals supplied by PTCGRAM?

Major importers include countries in the Middle East, the European Union, African nations and Southeast Asian markets that use these chemicals in manufacturing, detergents, metal processing and agro‑chemical formulations.

What are the usual lead times and minimum order quantities?

Lead times are generally 30 - 45 days after order confirmation, with minimum orders of 500 kg for liquids and 1 tonne for powders, subject to product availability.