About Om Nanotech Pvt. Ltd. - Computer - RAM & ROM Supplier in India

Om Nanotech Pvt. Ltd. is based in India and currently lists six active products across its catalogue. The supplier’s portfolio focuses on computer memory components, specifically RAM modules and USB flash storage devices, as indicated by the top categories "Computer - RAM & ROM" and "USB Flash Drive, Pen drive". The product list includes DDR2 modules at 533 MHz (PC2‑4200U), 667 MHz (PC2‑5300U), and 800 MHz (PC2‑6400U), a DDR1 module rated at 512 MB, a generic "DDR1 1GB 512MB" entry, as well as USB pen drives and a ZipMem memory product. These entries reflect a range of legacy memory technologies that are still used in certain industrial or refurbishment applications.

The catalogue explicitly names six items: DDR2 1 GB 533 MHz PC2‑4200U, DDR2 1 GB 667 MHz PC2‑5300U, DDR2 1 GB 800 MHz PC2‑6400U, DDR1 1 GB 512 MB, USB pen drives, and ZipMem Memory. No further specifications such as timings, voltage, or packaging details are provided in the source data. The inclusion of both DDR1 and DDR2 formats indicates the supplier can address older motherboard requirements, while the USB pen drive entry suggests capability in portable flash storage. All products are listed without HS codes, and the supplier is classified as an imported tier with a harbor trust level.

Product Range and Specialties of Om Nanotech Pvt. Ltd.

Om Nanotech’s catalogue covers three DDR2 memory speeds - 433 MHz (PC2‑4200U), 667 MHz (PC2‑5300U), and 800 MHz (PC2‑6400U) - each supplied as 1 GB modules, and a single DDR1 module listed as 1 GB 512 MB. In the wider industry, DDR2 modules are commonly graded by JEDEC standards such as PC2‑4200, PC2‑5300, and PC2‑6400, with typical operating voltages of 1.8 V and timing ranges from CL4 to CL6. DDR1 modules follow JEDEC PC‑2100 or PC‑2700 specifications, usually operating at 2.5 V. USB pen drives are generally offered in capacities from 4 GB to 128 GB, conforming to USB 2.0 or 3.0 standards, with built‑in controllers that meet USB‑IF compliance. ZipMem Memory refers to a niche flash‑based storage format that historically aligns with ZIP drive specifications, often packaged in 100‑200 MB capacities for legacy devices.

Trade and Export Information - Om Nanotech Pvt. Ltd.

India is a significant exporter of computer memory components, with RAM modules and USB flash drives commonly shipped to markets in Europe, North America, and Southeast Asia. Export shipments usually fall under HS Chapter 84 for electronic components, and buyers frequently request CE marking, RoHS compliance, and FCC declarations to satisfy regional safety and electromagnetic compatibility regulations. Logistics for these items typically involve 20‑foot or 40‑foot containers, with anti‑static packaging and moisture‑resistant cartons to protect the sensitive circuitry during transit. While Om Nanotech’s specific target markets are not listed, exporters of similar memory products from India often serve OEMs refurbishing older equipment, system integrators, and distributors handling legacy inventory.

Sourcing from Om Nanotech Pvt. Ltd. - Buyer Guidance

When sourcing memory modules or USB drives from Om Nanotech, buyers should request the full technical data sheet that lists JEDEC part numbers, voltage, timing (CAS latency), and any available test reports such as burn‑in or ESD resistance. Confirmation of RoHS and CE compliance certificates is advisable, as these are standard requirements for electronic components entering European and North American markets. Verify packaging details, including anti‑static bags and palletized cartons, and clarify the minimum order quantity, which for legacy DDR modules can range from a single pallet (approximately 500 pieces) to larger bulk lots depending on the buyer’s needs. Lead times for DDR2 and DDR1 stock are typically 2‑4 weeks, while USB pen drives may have shorter cycles if stocked as finished goods.

What memory types does Om Nanotech list in its catalogue?

The supplier lists DDR2 modules at 533 MHz (PC2‑4200U), 667 MHz (PC2‑5300U), 800 MHz (PC2‑6400U), a DDR1 module described as 1 GB 512 MB, and a generic USB pen drive product.

Are JEDEC specifications available for the DDR modules?

Buyers should request the JEDEC part numbers and timing sheets from the supplier; industry practice expects DDR2 modules to conform to PC2‑4200, PC2‑5300, or PC2‑6400 standards.

What certifications are typically required for importing these memory products?

Importers normally require RoHS compliance, CE marking for European markets, and FCC declaration for the United States; these documents should be obtained from the supplier before shipment.

What is the usual packaging for RAM modules and USB drives?

Standard packaging includes anti‑static bags, sealed cartons, and palletized loads for container shipping; moisture‑proof inner liners are common to protect against humidity.

What are typical minimum order quantities for legacy DDR memory?

Legacy DDR modules are often ordered in pallet sizes of around 500 units, though exact MOQ should be confirmed with the supplier based on current inventory.

How long does it take to receive an order from Om Nanotech?

Lead times for stocked DDR2 and DDR1 modules are generally 2 to 4 weeks, while USB pen drives may be dispatched within a shorter period if available as finished goods.

Can I obtain sample units before placing a full order?

Suppliers of electronic components typically provide sample units or a small trial batch upon request; buyers should ask for a sample quote and any associated testing reports.

Which regions commonly import Indian‑made memory components?

European Union countries, the United States, and Southeast Asian markets are frequent import destinations for Indian‑produced RAM and USB flash storage.