About Ningbo Litesource Import And Export Com - Electric Lamps, Tubes, Bulbs, Lights & Light Fittings Supplier in China

Ningbo Litesource Import And Export Com is based in China and currently lists five distinct lighting products. The catalogue includes two generic flood light entries, an LED project light lamp, a specific model LS‑LED271C LED AC flood light, a generic wall pack light and a model LS‑LED‑1302C wall pack light. All items fall under the broader categories of electric lamps and light‑emitting diodes, matching the supplier’s top categories. The product titles indicate a focus on outdoor illumination solutions, with both flood and wall‑mounted fixtures offered in LED form. No additional product families, such as indoor fixtures or decorative lamps, appear in the supplied data, and no HS codes are attached to any item.

Product Range and Specialties of Ningbo Litesource Import And Export Com

The flood light entries are typical LED fixtures used for area lighting, commonly supplied in wattage ranges from 50 W to 200 W and delivering luminous flux between 5 000 lm and 20 000 lm. Buyers usually look for an IP rating of IP65 for outdoor durability, a CRI of 80 + , and driver input voltages of 110‑240 V AC. The LS‑LED271C model is identified as an AC‑driven LED flood light, which generally incorporates a built‑in driver and may comply with IEC 60598‑2‑112 standards. Wall pack lights are low‑profile, wall‑mounted luminaires often used for street or parking‑lot lighting. Standard specifications include wattage of 30 W‑100 W, luminous flux of 3 000 lm‑8 000 lm, and IP ratings of IP44 to IP65. The LS‑LED‑1302C model likely follows similar technical parameters and may be supplied with a mounting bracket and a thermal management system typical for LED wall packs.

Trade and Export Information - Ningbo Litesource Import And Export Com

China is a major exporter of LED lighting, with shipments frequently directed to Europe, North America, and Southeast Asian markets. Export shipments of LED flood and wall pack fixtures are usually classified under HS Chapter 94 (e.g., 9405.40 for lamps and lighting fittings). Importers commonly require CE marking for EU markets, UL or ETL listings for North America, and RoHS compliance for hazardous substance restrictions. Typical packaging includes bulk cardboard boxes placed on wooden pallets, allowing 20‑ft containers to hold approximately 600‑800 units depending on fixture size. Common Incoterms are FOB Ningbo port or CIF destination, with freight forwarding handled by major carriers. Regulatory inspections often involve checking the CE Declaration of Conformity, UL test reports, and photometric data sheets. Chinese LED manufacturers increasingly adopt ISO 9001 quality management systems, although the supplier’s specific certifications are not listed in the provided facts.

Sourcing from Ningbo Litesource Import And Export Com - Buyer Guidance

When sourcing from Ningbo Litesource, request the latest product datasheet, photometric report, and any available CE or UL test certificates to confirm compliance with target market regulations. Verify the IP rating, voltage range, and driver type against the intended installation environment; mismatched voltage or insufficient ingress protection can cause field failures. Buyers should also ask for a sample unit before placing a bulk order. Typical minimum order quantities for LED flood and wall pack fixtures range from 100 to 500 pieces, with lead times of 30‑45 days after order confirmation, depending on the specific model and packaging requirements.

What types of lighting products does Ningbo Litesource list?

The supplier lists five LED lighting products: generic flood lights, an LED project light lamp, the LS‑LED271C LED AC flood light, generic wall pack lights, and the LS‑LED‑1302C wall pack light.

Are there any certifications mentioned for these products?

No certifications are listed in the supplied data. Buyers should request CE, UL, RoHS or other relevant certificates based on the destination market.

What specifications should a buyer verify for the flood lights?

Typical specifications include wattage (50‑200 W), luminous flux (5 000‑20 000 lm), IP rating (IP65), input voltage (110‑240 V AC), and compliance with IEC 60598‑2‑112 for LED fixtures.

What are the common packaging and shipping methods for these fixtures?

LED flood and wall pack lights are usually packed in bulk cardboard boxes on wooden pallets. A 20‑ft container can carry roughly 600‑800 units, and shipments are often quoted on FOB Ningbo or CIF destination terms.

What documentation is advisable to request before ordering?

Request a product datasheet, photometric test report, CE or UL test certificates, and a RoHS compliance statement to ensure the fixtures meet regulatory requirements.

What are typical lead times and minimum order quantities?

Lead times are generally 30‑45 days after order confirmation. Minimum order quantities commonly start at 100 pieces per model, though exact MOQ should be confirmed with the supplier.

Can I obtain a sample of the LS‑LED271C flood light?

Yes, buyers can ask for a single sample unit to evaluate build quality, light output, and IP rating before committing to a larger purchase.

Which markets commonly import LED flood and wall pack lights from China?

Major import markets include the European Union, the United States, Canada, and countries in Southeast Asia such as Vietnam and Thailand, where compliance with CE, UL and RoHS standards is typically required.