About MD Packaging Industries - Plastic Bottles & Sealings Supplier in India

India hosts MD Packaging Industries, which currently lists five distinct products in its catalogue. The company’s offerings fall under the Plastic Bottles & Sealings and Plastic Items categories. Its catalogue includes PET Preforms and HDPE Closures, Alaska PET Preforms, PCO 1881/1810 Preforms, CTC Preforms, and ROPP Preforms. Each item is identified by its material type and typical application in bottle manufacturing. The product list aligns with HS Chapter 39 families for plastic preforms and closures.

The PET preforms are supplied in standard diameters ranging from 20 mm to 30 mm and wall thicknesses commonly between 0.8 mm and 1.2 mm, suitable for carbonated and still beverage bottles. HDPE closures are typically sized for 28 mm to 38 mm bottle necks and meet industry closure torque specifications. The Alaska, PCO, CTC and ROPP preforms represent branded or specification‑specific designs used by bottlers for PET bottle blow‑moulding. All listed items are ready for export in bulk containers.

Product Range and Specialties of MD Packaging Industries

MD Packaging Industries lists five preform products: PET Preforms with HDPE Closures, Alaska PET Preforms, PCO 1881/1810 Preforms, CTC Preforms and ROPP Preforms. These belong to the broader plastic bottle preform segment, where PET grades are classified as PET 1 (food‑grade), PET 2 (non‑food) and PET 3 (technical). Typical PET preforms comply with ISO 9001 quality management and are often tested for intrinsic viscosity (IV) of 0.80 - 0.88 dL/g and clarity specifications.

HDPE closures are usually produced from HDPE resin meeting ASTM D3350 and are evaluated for closure torque (e.g., 3 - 5 Nm for standard 28 mm caps). In the global market, preforms are shipped in 20‑ft or 40‑ft containers, packed in cardboard trays or bulk pallets, with moisture content below 0.1 % to preserve polymer integrity. Buyers frequently request certificates such as FDA compliance for food‑contact PET and REACH registration for EU shipments.

Trade and Export Information - MD Packaging Industries

PET preforms fall under HS code 3917.21 and HDPE closures under 3920.90, categories that Indian exporters regularly ship to North America, the European Union and Southeast Asia. Indian plastic manufacturers benefit from established logistics corridors to ports such as Nhava Sheva and Chennai, enabling container loads of up to 22 metric tonnes per 40‑ft container.

International buyers commonly require FDA food‑contact approval for PET preforms, EU REACH registration, and ISO 9001 or BRC certification for the manufacturing facility. Standard export terms include CIF or FOB, with packaging in sealed, moisture‑controlled pallets and wood‑treated crates complying with ISPM 15. Inspection agencies like SGS or Bureau Veritas often perform pre‑shipment audits for compliance.

Sourcing from MD Packaging Industries - Buyer Guidance

Prospective buyers should request material data sheets specifying PET grade (IV, clarity) and HDPE resin type, along with test reports for torque and leakage for closures. Samples of each preform size are typically supplied in small batches (e.g., 5 kg) before confirming full‑scale orders.

Typical minimum order quantities range from one 20‑ft container (≈18 metric tonnes) for standard PET preforms to 5 metric tonnes for specialized closures. Lead times in India average 30 - 45 days after receipt of approved samples and required certifications. Buyers are advised to verify the supplier’s ISO or REACH documentation before finalizing contracts.

What product types does MD Packaging Industries offer?

The catalogue lists five plastic preform items - PET Preforms with HDPE Closures, Alaska PET Preforms, PCO 1881/1810 Preforms, CTC Preforms and ROPP Preforms - all classified under the Plastic Bottles & Sealings and Plastic Items categories.

Which HS codes are typically used for these products?

PET preforms are generally classified under HS 3917.21, while HDPE closures fall under HS 3920.90; these codes are applied by Indian exporters for customs clearance.

What standard specifications should buyers check for PET preforms?

Buyers usually verify the PET grade (e.g., PET 1 food‑grade), intrinsic viscosity between 0.80 - 0.88 dL/g, wall thickness 0.8 - 1.2 mm, and clarity requirements. Compliance with FDA food‑contact and ISO 9001 is also common.

How are HDPE closures typically evaluated?

Closure performance is tested for torque (typically 3 - 5 Nm for 28 mm caps) and leakage resistance according to ASTM D3350 material standards. Documentation such as a material data sheet and test report is standard.

What are the usual packaging and shipping formats?

Products are packed in moisture‑controlled pallets or cardboard trays, placed in 20‑ft or 40‑ft containers, and the wood packaging is treated to meet ISPM 15 regulations. Containers can hold up to about 22 metric tonnes of preforms.

What documentation should a buyer request before ordering?

Buyers should request a current material data sheet, test reports for torque and leakage, FDA or REACH compliance certificates, and any ISO 9001 or BRC audit reports held by the supplier.

What are the typical minimum order quantity and lead time?

Minimum orders are usually one 20‑ft container (≈18 metric tonnes) for standard PET preforms or 5 metric tonnes for specialized closures. Lead time from order confirmation to shipment is typically 30 - 45 days in India.