About Linqing FGB Bearing Co., Ltd. - Bearing Supplier in China

Linqing FGB Bearing Co., Ltd. is based in China and currently lists seven active bearing products. The catalogue includes spherical plain bearings identified under HS codes 8483.30 and 8483.40, as well as a deep‑groove ball bearing classified under HS code 8482.10.50. Materials specified range from chrome steel GCr15 and stainless steel 440C to carbon‑chromium alloy and PTFE‑lined variants. Each product entry cites the precise material composition, such as Chrome Steel (GCr15 / SUJ2) with PTFE liner for the GE45‑type bearings. The deep‑groove ball bearing 6210 open zz 2rs uses carbon‑chromium steel and falls within the 8482.10.50 sub‑heading for ball bearings. The supplier’s list therefore covers both plain and rolling element bearings with explicit material and HS‑code details.

The seven items cover three material groups: plain chrome steel (GCr15 / SUJ2), high‑strength carbon steel with PTFE/Nylon liners, and stainless steel 440C. Two entries (GE25ES‑2RS and GE25UK) are classified under HS 8483.40 and 8483.30 respectively, reflecting the distinction between stainless‑steel and PTFE‑lined designs. The deep‑groove ball bearing is the only product under the 8482 chapter, indicating a rolling element bearing rather than a plain bearing. All listings provide the standard suffixes for seals or shields (e.g., “zz” for double shields), which are common identifiers in bearing specifications.

Product Range and Specialties of Linqing FGB Bearing Co., Ltd.

The catalogue comprises spherical plain bearings (GE25ES‑2RS, GE25UK, GE45ES‑2RS, GE50ES, GEZ69ES, GEG90ES) and a single deep‑groove ball bearing (6210 open zz 2rs). Spherical plain bearings are typically sized by bore diameter and housing width, with load ratings defined by ISO 281 and ISO 1942 standards. Common grades for GCr15 steel bearings include hardness around 58‑62 HRC and surface finish Ra ≤ 0.8 µm. PTFE or nylon liners are used to reduce friction in high‑temperature or corrosive environments, and stainless‑steel 440C variants provide corrosion resistance for food‑grade or marine applications. Deep‑groove ball bearings such as the 6210 model are usually supplied with ABEC‑1 to ABEC‑3 precision grades, a dynamic load rating (C) in the range of 5 - 7 kN and a static load rating (C0) around 2 - 3 kN. These industry benchmarks help buyers compare the listed items with typical bearing specifications.

Industry practice for spherical plain bearings includes offering inner diameters from 10 mm up to 200 mm, outer diameters up to 250 mm, and load capacities expressed in kN. Buyers often request dimensional drawings, hardness reports, and surface‑roughness certificates. For deep‑groove ball bearings, standard dimensions follow the ISO 15 series, and buyers usually verify radial clearance, bearing noise level (dB), and lubrication recommendations. The materials cited in the Linqing catalogue align with these typical industry standards, allowing buyers to match the listed products to standard bearing catalogs.

Trade and Export Information - Linqing FGB Bearing Co., Ltd.

China is a major exporter of both plain and rolling‑element bearings, with the majority of shipments destined for automotive manufacturers in the European Union, original equipment manufacturers in the United States, and machinery assemblers in Southeast Asia. HS 8483 covers plain bearings, while HS 8482 includes rolling‑element bearings; customs authorities in importing countries often require conformity to ISO 9001 quality‑management certificates and, where applicable, CE marking for equipment integration. Typical export documentation includes a commercial invoice, packing list, certificate of origin, and material test report confirming GCr15 chemical composition and hardness. Shipments are frequently loaded in wooden pallets or steel crates, secured for sea freight under FOB Shanghai or CIF Rotterdam terms, with container sizes of 20 ft or 40 ft depending on order volume.

Chinese bearing exporters generally adhere to the China Compulsory Certification (CCC) system for safety‑critical applications, and buyers often request additional compliance evidence such as RoHS declarations for PTFE‑lined products. The HS 8483.30 sub‑heading is used for plain bearings with metal or polymer liners, while HS 8483.40 denotes stainless‑steel variants, reflecting the material distinction in Linqing’s listings. Importers typically perform pre‑shipment inspections under the Shanghai Inspection Service (SIS) or similar agencies to verify material certificates and dimensional compliance before release.

Sourcing from Linqing FGB Bearing Co., Ltd. - Buyer Guidance

When sourcing from Linqing FGB Bearing Co., Ltd., buyers should request a material test report confirming the GCr15 or 440C composition, along with hardness (HB or HRC) values for each bearing type. For PTFE or nylon‑lined bearings, a polymer‑compatibility sheet and liner thickness measurement are standard verification documents. Dimensional drawings should include bore, outer diameter, width, and seal configuration (e.g., 2RS, ZZ) to ensure fit‑up with existing equipment. Buyers are advised to confirm the supplier’s ISO 9001 certification or any other quality‑management system before placing a first order, and to arrange a pre‑shipment inspection for large batches to validate load ratings and surface finish.

Typical lead times for Chinese bearing manufacturers range from 15 to 30 days after order confirmation, depending on the need for custom liner applications. Minimum order quantities often start at one container (20 ft) for standard sizes, but smaller quantities may be accepted for PTFE‑lined variants upon request. Packaging usually involves individual bearing bags or plastic sleeves placed in bulk wooden crates, with moisture‑proof liners for stainless‑steel items to prevent corrosion during transit.

What bearing types are listed by Linqing FGB Bearing Co., Ltd.?

The supplier lists seven products: six spherical plain bearings (GE25ES‑2RS, GE25UK, GE45ES‑2RS, GE50ES, GEZ69ES, GEG90ES) and one deep‑groove ball bearing model 6210 open zz 2rs.

Which HS codes apply to the listed bearings?

Spherical plain bearings are under HS 8483.30 or HS 8483.40, depending on material, while the deep‑groove ball bearing falls under HS 8482.10.50.

What materials are used for the spherical plain bearings?

Materials include chrome steel GCr15, stainless steel 440C, chrome steel with PTFE liner, and high‑strength carbon steel with PTFE/nylon liner.

What certifications should a buyer verify for these bearings?

Buyers should request the supplier’s ISO 9001 quality‑management certificate, material test reports for GCr15 or 440C, and, where required, CE or CCC conformity statements.

What typical dimensions and load ratings apply to the GE45ES‑2RS bearing?

GE45ES‑2RS conforms to ISO 281 dimensions, with bore sizes commonly from 25 mm to 100 mm, and a dynamic load rating (C) typically between 5 kN and 12 kN, depending on exact size.

How are the bearings packaged for export?

Products are usually packed in individual plastic sleeves or paper bags, then placed on wooden pallets or in steel‑framed crates, with moisture‑proof liners for stainless‑steel items.

Which Incoterms are most frequently used for shipments from China?

Exporters often quote FOB Shanghai for buyers who arrange freight, or CIF Rotterdam for those who prefer the supplier to handle main carriage.

What documentation is required for customs clearance of these bearings?

A commercial invoice, packing list, certificate of origin, material test report, and any applicable CE or CCC certificates are standard for customs clearance.