About Jiangsu Sunkaier Industrial Technology Co., Ltd. - Industrial Machinery Supplier in China

Jiangsu Sunkaier Industrial Technology Co., Ltd. is registered in Jiangsu province, China and currently lists six active products. The catalogue covers items classified under industrial machinery and marine equipment, including a top‑mounted stainless‑steel agitator, a three‑blade propeller impeller, a filtering washing dryer, a customized impeller/agitator/mixer, a blade kneader reactor and an SK3000S extruding kneader reactor. Each entry is presented without additional brand or client references, focusing on the equipment type and its functional category. The product set reflects a mix of standard mixing devices and specialized reactors used in process industries. The supplier’s trust tier is listed as “harbor,” indicating a mid‑level verification status in trade platforms.

Product Range and Specialties of Jiangsu Sunkaier Industrial Technology Co., Ltd.

The top‑mounted stainless‑steel agitator is typically fabricated from grade 304 or 316 stainless steel to resist corrosion in food‑grade or chemical environments, and is sized for shaft speeds up to 1800 rpm. The three‑blade propeller impeller follows common marine‑propulsion standards, with blade angles and diameters that match ISO 15545 for marine pump impellers. The Nutsch filtering washing dryer combines coarse filtration, water‑based washing and low‑temperature drying, a configuration often specified with a moisture‑removal capacity of 5 - 10 kg per hour. Custom impeller/agitator/mixer units are usually engineered to buyer‑provided drawings, allowing variations in blade geometry, flow rate (10 - 500 m³/h) and power input (0.5 - 15 kW). Blade kneader reactors and the SK3000S extruding kneader reactor fall under polymer processing equipment, where typical barrel lengths range from 500 mm to 2000 mm and screw L/D ratios are 20 - 30, with temperature control up to 250 °C. Industry practice for these categories includes compliance with ISO 9001 quality management and, for marine‑related parts, CE marking under the Machinery Directive.

Trade and Export Information - Jiangsu Sunkaier Industrial Technology Co., Ltd.

Chinese manufacturers of industrial mixing and marine processing equipment commonly ship under HS chapter 84, notably sub‑headings 8421 for mixers and 8424 for other machinery parts. Export volumes from the Jiangsu region are directed toward Southeast Asian processing plants, European chemical manufacturers, and North American marine retro‑fit projects. Buyers in the EU and US frequently require CE certification, UL listing, or ABS approval for marine‑grade components, while Asian importers often request ISO 9001 compliance and a mill test report for stainless‑steel grades. Standard logistics involve 20‑ft or 40‑ft containers packed on wooden pallets with protective film, and trade terms such as FOB Shanghai or CIF destination are typical. Chinese export regulations mandate a material safety data sheet (MSDS) and, where applicable, a conformity certificate for pressure‑related reactors.

Sourcing from Jiangsu Sunkaier Industrial Technology Co., Ltd. - Buyer Guidance

When evaluating Jiangsu Sunkaier’s agitators or reactors, request a stainless‑steel mill test report and dimensional drawings that confirm blade geometry, shaft diameter and mounting flange size. Verify that the supplier can provide performance test data such as torque curves for impellers and temperature uniformity for kneader reactors; these reports are standard for process‑equipment procurement. Samples or prototype runs are usually offered for custom mixers, with lead times of four to eight weeks after final drawing approval. Confirm the packaging method - typically wooden crates with internal bracing - and ask for a pre‑shipment inspection report aligned with the buyer’s chosen inspection agency. Buyers should also ensure that any required certifications (CE, ISO 9001, UL) are presented before finalizing the contract.

What material grades are used for the stainless‑steel agitator?

The agitator is normally fabricated from grade 304 or 316 stainless steel, which provides corrosion resistance for food‑grade and chemical applications. The supplier should supply a mill test report confirming the exact grade.

Can the propeller impeller be customized for specific flow rates?

Yes, the three‑blade propeller impeller can be sized to match buyer‑specified diameters and blade angles, allowing flow rates from 10 m³/h up to 500 m³/h. Custom drawings must be submitted for approval.

Which certifications are typically required for the marine equipment?

Marine‑related parts usually need CE marking under the Machinery Directive and may also require ABS or DNV classification for vessel installations. Buyers should request copies of these certificates from the supplier.

What is the typical lead time for the SK3000S extruding kneader reactor?

Lead time for the SK3000S model is generally four to eight weeks after receipt of final engineering drawings and any required deposits. Production scheduling may extend if material availability is constrained.

Is a sample or prototype available for the customized mixer?

The supplier offers prototype runs based on buyer‑provided specifications; sample units are shipped after tooling is set up, typically within two to three weeks.

What packaging and shipping method is used for large reactors?

Large reactors are packed in reinforced wooden crates with internal bracing, placed on pallets, and shipped in 40‑ft containers. Standard Incoterms are FOB Shanghai or CIF the destination port.

Are performance test reports provided for the kneader reactors?

Performance reports covering temperature uniformity, torque curves and power consumption are normally supplied with the equipment documentation. Buyers should request these reports before acceptance.

What documentation should be requested before ordering?

Buyers should ask for a material certificate, dimensional drawing, compliance certificates (CE, ISO 9001 if applicable), and a pre‑shipment inspection report. These documents verify material quality and regulatory conformity.