About Imani Fokas Sdn Bhd - Base Metals and Coal Supplier in Malaysia

Malaysia, located in Southeast Asia, hosts Imani Fokas Sdn Bhd which currently lists six active products in its catalogue. The portfolio spans both base‑metal and energy commodities, comprising Steam Coal, Copper Cathodes (HS code 7403.11, electrolytic copper 99.99 % Grade A), Copper Concentrate (HS code 7403.11, copper content 25‑35 %), Copper Ore (HS code 2603.00, copper content 25‑30 %), Copper Wire Millberry Scrap (HS code 7404.00, copper purity minimum 99.9 % Millberry grade), and Used Rails (HS code 7204.29, carbon‑steel rail scrap R50 grade). Each item is grouped under its respective HS‑code family, reflecting the standard customs classification for raw metal and coal products. The supplier’s catalogue does not provide additional specifications beyond material grades and HS codes, keeping the listing concise. This set of six products defines the current trading scope of Imani Fokas Sdn Bhd.

Product Range and Specialties of Imani Fokas Sdn Bhd

The catalogue presents Steam Coal without a listed HS code, a bulk fuel typically classified under HS 2701 for bituminous coal. Copper Cathodes are described as electrolytic copper with 99.99 % purity, matching the industry standard Grade A cathode often produced to ASTM B115 specifications. Copper Concentrate and Copper Ore are both reported with copper grades between 25 % and 35 %, a range common for porous concentrates that are later smelted; they fall under the same HS 7403.11 heading used for refined copper products. The Copper Wire Millberry Scrap is listed as copper 99.9 % minimum, a grade aligned with Millberry‑grade scrap commonly accepted for secondary smelting and recycling. Used Rails are identified as carbon‑steel rail scrap R50, a classification used for high‑grade rail steel that can be re‑rolled or melted, and are placed under HS 7204.29. Typical industry practice for these materials includes assay reports, moisture content checks for coal, and dimensional tolerances for scrap, which buyers often verify before purchase.

Trade and Export Information - Imani Fokas Sdn Bhd

Malaysia is a regional exporter of both base‑metal concentrates and steel scrap, with China, Japan, South Korea, the European Union and the United States representing the largest import markets for copper and steel secondary materials. HS 7403.11 covers copper cathodes, concentrates and ore, while HS 7404.00 applies to copper scrap and HS 7204.29 to carbon‑steel scrap; customs authorities in destination countries usually require a detailed commercial invoice, a material test report (MTR) and, where applicable, a certificate of origin. Buyers of copper cathodes typically request compliance with ASTM B115 or IEC 60344, and may also ask for ISO 9001‑based quality management documentation from the exporter, though the supplier’s own certifications are not listed. Coal exports are generally shipped in bulk carriers on a CIF or FOB basis, with moisture content and calorific value specified on the shipping documents; the HS 2701 classification is the standard customs code for steam coal. For scrap metals, containerised shipments in 20‑ft or 40‑ft containers, as well as bulk loading onto roll‑on/roll‑off vessels, are common, with packaging that secures the material against contamination and corrosion during transit.

Sourcing from Imani Fokas Sdn Bhd - Buyer Guidance

When sourcing from Imani Fokas Sdn Bhd, buyers should request an up‑to‑date assay certificate for each copper product, confirming purity percentages and trace‑metal limits. For Steam Coal, a calorific value test, moisture content analysis and a sulphur content report are standard documents that help verify fuel quality. Because no certifications are listed for the supplier, buyers are advised to ask for any ISO quality‑management certificates, third‑party inspection reports (e.g., SGS, Bureau Veritas) and a certificate of origin to satisfy customs and banking requirements. Verify the HS codes on the commercial invoice match the product descriptions, and confirm packaging details - bulk bags for coal, steel drums or wooden pallets for copper scrap - to ensure safe handling. Confirm minimum order quantities, typical lead times (often 30‑45 days for copper cathodes and 20‑30 days for scrap) and the preferred Incoterm (FOB Port Klang or CIF Shanghai are common for Malaysian exporters).

What copper products does Imani Fokas Sdn Bhd list in its catalogue?

The supplier lists Copper Cathodes (99.99 % electrolytic copper, HS 7403.11), Copper Concentrate (25‑35 % Cu, HS 7403.11), Copper Ore (25‑30 % Cu, HS 2603.00) and Copper Wire Millberry Scrap (minimum 99.9 % Cu, HS 7404.00).

Is there any certification information provided for the copper grades?

The facts do not include any specific certifications held by the supplier; buyers should request assay certificates, ASTM B115 compliance documents, and any ISO‑based quality certificates they require.

What steel scrap product is offered and under which HS code?

Used Rails are offered as carbon‑steel rail scrap R50 grade, classified under HS 7204.29.

Does the catalogue include any details for Steam Coal?

Steam Coal is listed without an HS code; it is typically classified under HS 2701 for bituminous coal, and buyers normally request calorific value, moisture and sulphur analyses.

Which documents are commonly required for copper cathode shipments?

Buyers usually ask for a material test report (MTR) showing 99.99 % purity, a certificate of origin, and an independent inspection certificate such as SGS or BV.

What are the typical shipping methods for the listed products?

Bulk carriers are standard for Steam Coal, while copper cathodes, concentrates and scrap are commonly shipped in 20‑ft or 40‑ft containers, often on FOB Port Klang or CIF terms to the buyer’s port.

Are there standard quality grades or specifications for the copper wire millberry scrap?

Millberry scrap is generally expected to meet a minimum of 99.9 % copper purity and be free of significant foreign metal contamination; buyers often verify this with an assay certificate.

What should a new buyer verify before placing an order with this supplier?

Confirm the correct HS code on the invoice, obtain up‑to‑date assay or test reports for each metal product, request any required ISO or third‑party inspection certificates, and clarify packaging, MOQ and lead‑time details.