About Huanghua Wanfang Hardware & Plastic Products Co., Ltd. - Hardware & Plastic Products Supplier in China

Based in China, Huanghua Wanfang Hardware & Plastic Products Co., Ltd. currently lists five active products. The catalogue includes a plastic rebar chair, a temporary fence system, a metal garden rose arch, an adjustable pole anchor bolt, and a no‑dig ground anchor. These items fall under the broader categories of fencing materials and general hardware, matching the supplier’s top‑category listing of Fencing Materials. Each product is identified by its functional description rather than a brand name, and the supplier classifies them within the hardware and plastic product segment. The listing does not provide HS codes or certification details.

The five items cover both metal and polymer components used in construction, agriculture, and landscaping projects. The plastic rebar chair is typically fabricated from high‑density polyethylene (HDPE) and sized to accommodate standard #12 rebar. The temporary fence and metal garden rose arch are generally supplied in galvanised steel or powder‑coated finishes to resist corrosion. Anchor solutions such as the adjustable pole anchor bolt and the no‑dig ground anchor are designed for rapid installation in soil without concrete foundations. Buyers can view the full product titles in the supplier’s online catalogue for further detail.

Product Range and Specialties of Huanghua Wanfang Hardware & Plastic Products Co., Ltd.

The catalogue’s five products represent common hardware solutions for temporary and permanent fencing installations. Plastic rebar chairs are used to hold reinforcement bars in concrete works; they are usually produced in lengths of 600 mm to 1200 mm and support loads up to 5 kN per unit when made from HDPE. Temporary fences consist of modular panels attached to steel posts, often complying with EN 1317‑1 impact resistance standards. Metal garden rose arches are decorative yet load‑bearing structures, frequently fabricated from ASTM A36 steel with a minimum thickness of 2 mm.

Adjustable pole anchor bolts and no‑dig ground anchors are fast‑ening devices that enable quick anchoring of poles, signs, or lighting fixtures. In the industry, pole anchor bolts are commonly supplied in diameters of 30 mm to 50 mm with a thread pitch of 3 mm, and they may be hot‑dip galvanized to meet ISO 1461 corrosion protection. No‑dig ground anchors often use a composite of steel and polymer sleeves, allowing insertion depths of 300 mm to 600 mm without excavation. Buyers typically request technical data sheets that specify material grade, tensile strength (e.g., 250 MPa for steel components), and recommended installation torque.

Trade and Export Information - Huanghua Wanfang Hardware & Plastic Products Co., Ltd.

Chinese manufacturers of fencing hardware and plastic anchoring products frequently export to construction markets in Southeast Asia, the Middle East, Africa, and Eastern Europe. The relevant HS code families include 7308 for metal structures such as fence posts and brackets, and 3926 for plastic building fittings, which are routinely inspected under the Shanghai Customs inspection regime. Importers often require conformity to CE marking or ISO 9001 quality management systems, and they may request third‑party test reports for load capacity and corrosion resistance.

Logistically, these items are typically packed in shrink‑wrapped bundles on wooden pallets, allowing loading of up to 20 ft containers (≈ 22 tonnes) or 40 ft containers (≈ 44 tonnes) depending on packaging density. Common Incoterms used by Chinese exporters are FOB Shanghai or CIF destination port, with buyers arranging freight forwarders for container shipping. Export documentation generally includes a commercial invoice, packing list, certificate of origin, and where applicable, a material safety data sheet (MSDS) for polymer components.

Sourcing from Huanghua Wanfang Hardware & Plastic Products Co., Ltd. - Buyer Guidance

When sourcing from Huanghua Wanfang, buyers should request a detailed product specification sheet that lists material grade (e.g., HDPE or hot‑dip galvanized steel), dimensions, load rating, and finish coating. It is advisable to obtain an independent laboratory test report confirming tensile strength, impact resistance, and corrosion performance, especially for anchor bolts and fence components intended for outdoor use.

Buyers should also verify that the supplier can provide CE conformity or ISO 9001 audit reports if required by the importing country’s customs regulations. Minimum order quantities for hardware items are often set at one container load, but the supplier may accommodate smaller cartons upon request; confirming lead time (typically 30‑45 days from order confirmation) and packaging details such as pallet configuration will help avoid delays.

What product categories does the supplier list?

The supplier lists five hardware and plastic items: a plastic rebar chair, a temporary fence, a metal garden rose arch, an adjustable pole anchor bolt, and a no‑dig ground anchor. All of these fall under fencing materials and general hardware categories.

Are HS codes provided for the products?

The catalogue does not include specific HS codes for each item. Similar products are usually classified under HS 7308 for metal structures and HS 3926 for plastic building fittings.

Which certifications should a buyer request?

Buyers should ask for CE marking and ISO 9001 quality management certification to meet most import requirements. Additionally, third‑party test reports that verify material grade, load capacity, and corrosion resistance are advisable.

What are typical minimum order quantities and container loading?

Standard shipments are packed on pallets suitable for a 20 ft container (approximately 22 tonnes) or a 40 ft container (approximately 44 tonnes). Many exporters set a MOQ of one container, though smaller pallet loads can often be negotiated.

How long does production and delivery usually take?

Lead times for these hardware items are commonly 30 to 45 days after order confirmation. The exact timeframe depends on the specific product and any required testing or certification.

What packaging is used for these items?

Products are typically shrink‑wrapped or boxed and stacked on wooden pallets. The packing list details quantity, weight, and dimensions for each pallet to facilitate customs clearance.

Which regions commonly import these types of products?

Major importers include construction and infrastructure markets in Southeast Asia, the Middle East, Africa, and Eastern Europe. These regions frequently source temporary fencing and anchoring solutions for projects such as road works, agricultural facilities, and site security.