About Helic Cutting Tools Co., Ltd. - Drilling Tools Supplier in Taiwan

Helic Cutting Tools Co., Ltd. is based in Taiwan and currently lists ten active products in its public catalogue. The company’s catalogue focuses on drill bits and hole‑cutting accessories that serve woodworking, metalworking, masonry and specialty applications. Product titles include Single Spur Auger Bit, Countersink Bit, HSS Twist Drill Bit and several carbide‑tipped variants. Each item falls under the broader HS chapter 8205 (tools) used for hand‑held and power‑driven drilling tools. The supplier classifies itself under the imported tier “harbor” in trade platforms.

The listed items span both standard geometry bits such as single‑spur auger and twist drills and specialty cutters like TCT (tungsten carbide‑tipped) tile bits, masonry rebar cutter and ice auger drill. Materials mentioned in the catalogue include high‑speed steel (HSS) and tungsten carbide (TCT) for enhanced wear resistance. The product set also covers accessories for soil testing and surveying, reflecting the top‑category grouping of “Soil Testing & Surveying Instruments”. While the catalogue does not specify certifications, the product types typically require compliance with international safety and performance standards. The range is positioned for distribution to manufacturers and end‑users of drilling equipment worldwide.

Product Range and Specialties of Helic Cutting Tools Co., Ltd.

Helic Cutting Tools’ catalogue comprises ten distinct drill‑bit products: Single Spur Auger Bit, Countersink Bit, Powerful Tungsten Carbide Hole Cutter, HSS Twist Drill Bit, Masonry Rebar Cutter, Earth Drill Bit, TCT Tile Drill Bit, Glass and Tile Drill Bit, Ice Auger Drill and TCT Multi‑Purpose Drill Bit. The bits are manufactured from high‑speed steel (HSS) or tungsten carbide (TCT), materials that commonly meet ISO 13399 for steel tools and ISO 13396 for carbide tools. Typical specifications for HSS twist drills include diameters from 1 mm to 13 mm, helix angles of 30°, and hardness of HRC ≥ 60; TCT tile bits are often supplied with a 10 mm carbide tip length and a 70 µm surface finish to resist abrasion.

In the broader tooling market, drill bits of this type are graded by ISO‑based tolerances for diameter, run‑out and point angle, and by ASTM A681 for hardness. Buyers frequently request data sheets that list shank type (straight, SDS‑plus, etc.), recommended spindle speeds (RPM) and feed rates for wood, metal or masonry substrates. Packaging for these items usually involves sealed cardboard boxes of 100‑200 pieces, which can be consolidated into 20‑ft containers holding roughly 1,300 kg of product.

Trade and Export Information - Helic Cutting Tools Co., Ltd.

Taiwanese drill‑bit exporters commonly ship to construction, furniture manufacturing and automotive sectors in North America, Europe and Southeast Asia. The relevant HS code family is 8205.40, covering hand‑held and power‑driven drilling tools, and customs authorities often require a commercial invoice, packing list and, where applicable, a CE Declaration of Conformity for EU destinations. Export logistics from Taiwan typically use the ports of Kaohsiung or Taichung, with Incoterms such as FOB Taiwan or CIF destination prevailing in contracts.

Buyers importing these tools usually request ISO 9001 quality‑management certification from the supplier, as well as material test reports confirming hardness and carbide composition. For masonry and tile applications, compliance with EN 14721 (drilling machines) or ASTM C1152 (tile drill bits) is frequently stipulated. Shipping is standardised in 20‑ft or 40‑ft containers, with each container able to accommodate 1,200‑1,500 kg of drill bits, depending on packaging density.

Sourcing from Helic Cutting Tools Co., Ltd. - Buyer Guidance

When sourcing from Helic Cutting Tools, buyers should obtain a material test report that details hardness (HRC for HSS, Vickers for carbide), dimensional tolerance and coating thickness if applicable. Requesting a copy of the supplier’s ISO 9001 certificate or any CE declaration helps verify compliance with common market requirements. Samples of the exact bit size and material are advisable before placing a bulk order to confirm fit and performance in the intended equipment.

Verify the packaging details - typically reinforced cardboard boxes with clear HS code labeling - and confirm the agreed Incoterm (FOB Taiwan is typical). Confirm the minimum order quantity, which in this segment often starts at 500 pieces per size, and align lead times (generally 15‑30 days after order confirmation) with production schedules. Ensure that any required certifications for the target market are provided prior to shipment.

What drill‑bit product types are listed in Helic Cutting Tools’ catalogue?

The catalogue lists ten items, including a Single Spur Auger Bit, Countersink Bit, HSS Twist Drill Bit, Powerful Tungsten Carbide Hole Cutter, Masonry Rebar Cutter, Earth Drill Bit, TCT Tile Drill Bit, Glass and Tile Drill Bit, Ice Auger Drill and a TCT Multi‑Purpose Drill Bit.

Which materials are used for these drill bits?

Bits are produced from high‑speed steel (HSS) for general metal and wood drilling, and from tungsten carbide (TCT) for high‑wear applications such as tile, masonry and ice drilling. These materials typically meet ISO 13399 and ISO 13396 standards.

How can I request a sample of a specific drill bit?

Buyers can ask the supplier to ship a physical sample of the required size and material, usually one to two pieces per model. Samples are sent under FOB terms and allow the buyer to verify fit, geometry and cutting performance before a larger order.

What certifications should I verify before purchasing?

For Taiwanese drill‑bit exporters, buyers commonly request an ISO 9001 quality‑management certificate, a CE Declaration of Conformity for EU shipments, and material test reports that confirm hardness (HRC ≥ 60 for HSS, Vickers ≥ 1500 for carbide).

What are the typical minimum order quantity and lead time?

Typical MOQ for drill bits is around 500 pieces per size, though larger orders may receive volume discounts. Production lead time after order confirmation is usually 15‑30 days, depending on the material and any heat‑treatment requirements.

How are the drill bits packaged for export?

Items are packed in reinforced cardboard boxes that list the HS code 8205.40 and total weight. Full‑container loads for a 20‑ft container generally hold 1,200‑1,500 kg of assorted drill bits, with bulk shipments using wooden crates when needed.

Which markets does Helic Cutting Tools primarily serve?

The supplier’s export profile includes buyers in North America, Europe and Southeast Asia, serving sectors such as construction, furniture manufacturing, and automotive component production that require reliable drilling tools.

What documentation is needed for customs clearance of these tools?

Customs typically require a commercial invoice, packing list, the HS code declaration (8205.40), and any market‑specific certificates such as CE for the EU or a US import permit for specific tool categories. Providing these documents in advance helps avoid clearance delays.