About Heibeiyuanlv - Stainless Steel Baskets Supplier in China

Heibeiyuanlv is based in China and currently lists 13 active products across five top categories: Household Baskets, Kitchen Baskets, Steel Tubes, Agriculture Nets and Stainless Steel Tubes. The catalogue includes a mix of stainless‑steel wire mesh baskets for domestic and medical use as well as a series of BBQ and smoker tubes, three of which carry specific HS codes in chapter 73 (7304.41, 7304.49 and 7306.90). All listed items are described with material specifications such as stainless steel 304 (18 % Cr, 8 % Ni) or 304/316 grades, indicating a focus on corrosion‑resistant alloys.

The product set comprises a stainless steel fry basket, medical‑grade wire mesh baskets, welding and stamping mesh baskets, a cleaning sterilized basket, a medical disinfection basket, instruments sterilization basket, a barbecue net, hexagonal BBQ smoking tubes, triangular and square pellet smoker tubes, and a round pellet smoker tube. Each item is defined by its mesh construction or tube shape rather than by size or capacity, reflecting a catalogue that targets niche applications in food preparation, medical sterilisation and outdoor cooking.

Product Range and Specialties of Heibeiyuanlv

The stainless steel fry basket and the various wire‑mesh baskets are fabricated from 304 stainless steel, a grade commonly used for food‑contact equipment due to its resistance to rust and ease of cleaning. Typical mesh openings for such baskets range from 2 mm to 6 mm, and wire diameters are often 0.3 mm to 0.8 mm, providing sufficient strength for handling hot oils or medical instruments. The BBQ net and smoking tubes are also made from 304 or 316 stainless steel; 316 offers higher molybdenum content for enhanced resistance to acidic smoke environments. Industry standards for these products include compliance with FDA food‑contact regulations (CFR 21) and, for medical baskets, ISO 13485 sterilisation requirements.

Trade and Export Information - Heibeiyuanlv

China is one of the largest exporters of stainless‑steel wire mesh and tubular products, with the majority of shipments destined for North America, the European Union and Southeast Asian markets. The HS codes present in the catalogue (7304.41, 7304.49, 7306.90) fall under Chapter 73, which is subject to standard customs valuation and anti‑dumping monitoring. Buyers typically request ISO 9001 quality‑management certification and mill test reports confirming alloy composition and mechanical properties. Common logistics involve loading bundles onto 20‑ft or 40‑ft containers, with FOB Shanghai or CIF destination ports frequently used in contracts.

Regulatory considerations include the need for CE marking when the products are sold within the EU, and compliance with the US FDA’s food‑contact provisions for the BBQ and kitchen baskets. Export documentation often comprises a commercial invoice, packing list, certificate of origin and, where required, a sanitary and phytosanitary (SPS) certificate for items intended for food‑service use.

Sourcing from Heibeiyuanlv - Buyer Guidance

When evaluating Heibeiyuanlv’s baskets, request a mill test report that details the exact stainless‑steel grade, tensile strength (typically 520 MPa for 304) and corrosion‑resistance data. For medical‑grade wire mesh, ask for a sterilisation validation report and confirmation of compliance with ISO 13485 or equivalent. Verify mesh opening size, wire diameter and load‑bearing capacity against your application specifications before confirming order quantities.

Typical minimum order quantities for stainless‑steel mesh baskets range from 500 to 2 000 units per style, with lead times of 25‑45 days depending on the complexity of the weave and any custom dimensions. Packaging is usually in sealed cardboard boxes or shrink‑wrapped pallets to protect the mesh from deformation during transit. Ensure that the supplier can provide the required certifications (e.g., ISO 9001, FDA food‑contact) as part of the pre‑shipment documentation.

What stainless‑steel grades are used for the BBQ smoking tubes?

The catalogue lists stainless steel 304 for the hexagonal and square tubes and 304/316 for the triangular pellet smoker tube. Grade 304 is standard for food‑contact applications, while 316 adds molybdenum for higher corrosion resistance.

Are there HS codes for all the stainless‑steel tube products?

Three tube products include HS codes: the hexagonal BBQ smoking tube (7304.41), the round pellet smoker tube (7304.49) and the triangular and square pellet smoker tubes (both 7306.90). Other basket items are covered by broader HS codes in Chapter 73.

Which certifications should a buyer request for the medical wire‑mesh baskets?

Buyers should ask for ISO 13485 certification, a mill test report confirming 304 stainless‑steel composition, and a sterilisation validation report that meets the relevant medical device standards.

What typical mesh specifications are expected for the kitchen fry basket?

Kitchen fry baskets usually feature mesh openings of 3 mm to 5 mm with wire diameters between 0.4 mm and 0.6 mm, providing adequate support for hot oil while allowing drainage.

How are the products packaged for international shipment?

Products are generally packed in sealed cardboard boxes or shrink‑wrapped on pallets, with each container loaded onto 20‑ft or 40‑ft sea containers under FOB or CIF terms.

What documentation is required for importing the stainless‑steel baskets into the EU?

Importers should obtain a commercial invoice, packing list, certificate of origin, CE conformity declaration and, where applicable, an FDA food‑contact compliance statement.

What is the typical lead time for a custom‑size stainless‑steel mesh basket?

Custom‑size orders usually require 30‑45 days from order confirmation, depending on the complexity of the mesh pattern and any additional finishing processes.