About Haomei Aluminum - Aluminum Supplier in China

China‑based Haomei Aluminum lists 58 active products spanning several aluminium families. The catalogue includes aluminium plates, sheets, foils, coils, strips and alloy forms, as well as concrete mixers and concrete pump trucks. Products are classified under HS code 7606.12 for most plates, sheets and colour‑coated coils, 7606.11 for certain plates and foils, 7607.11 for thin foils, 7607.19 for laminated foils, 8474.31 for concrete mixers, and 8705.90 for concrete pump trucks. The supplier’s top categories are Concrete Mixer, Concrete Pump, Aluminium Plate, Aluminium Sheets, Aluminium Foils, Aluminium Coils, Aluminium Foil, Aluminium Strips and Aluminium Alloy.

The listed items range from 5083 aluminium plate for tanker bodies and marine‑grade 5083 plate, to 2024 hard aluminium plate used in aerospace, 3003 and 3004 alloy coils for packaging and electronics, and 5052 marine‑grade sheets. Additional entries include 1050 pure aluminium sheet, 7075 aircraft‑grade sheet, 1050 aluminium foil for battery and electronics, and specialised products such as aluminium gutter coil with PVDF coating. Concrete equipment entries such as the HM4.0 self‑loading concrete mixer and the HZS25 small concrete plant are coded under HS 8474.31. The concrete pump truck (32‑34‑36 m boom) appears under HS 8705.90.

Product Range and Specialties of Haomei Aluminum

The aluminium portfolio covers widely used alloys: 5083 (Al‑Mg, marine grade), 2024 (Al‑Cu‑Mg, aerospace grade), 3003/3004 (Al‑Mn, general‑purpose), 5052 (Al‑Mg, marine), 7075 (Al‑Zn‑Mg‑Cu, high‑strength aircraft), 1050 (commercial‑grade pure aluminium), and 1060/1070 (electrical‑grade foils). Typical specifications follow ASTM B209 for plate and sheet thicknesses from 0.5 mm to 25 mm, temper designations such as H321, H32, H22, and tensile strengths ranging from 190 MPa (3003) to 570 MPa (7075). Foils are usually supplied in thicknesses of 0.02 mm to 0.12 mm and meet ASTM B209 or IEC 60228 for electrical conductors. Colour‑coated coils often comply with EN 14600 for paint systems, while laminated foils conform to IEC 60384 for capacitor applications. The concrete mixers and pump trucks are built on carbon‑steel frames with alloy‑wear‑resistant drums, classified under HS 8474.31, and are typical of Chinese heavy‑equipment exporters.

Trade and Export Information - Haomei Aluminum

China is among the world’s largest exporters of aluminium products, shipping most items in 20‑ft or 40‑ft containers with wooden pallets, stretch‑wrap and anti‑corrosion film. Buyers in Europe, North America and Southeast Asia commonly import HS 7606 plates for automotive, aerospace and marine sectors, while HS 7607 foils serve electronics, packaging and transformer winding markets. Importers often require ISO 9001 quality‑management certification, CE marking for electrical foils, and compliance with ASTM or EN standards; these documents are typically requested before shipment. Customs clearance frequently involves verification of HS codes, country of origin marking, and, for certain alloys, anti‑dumping duties. Standard Incoterms used by Chinese aluminium exporters include FOB Shanghai or CIF destination port, with freight forwarding arranged for bulk coil rolls or sheet bundles.

Sourcing from Haomei Aluminum - Buyer Guidance

When sourcing from Haomei Aluminum, request a material test certificate that lists chemical composition, tensile strength, elongation and temper designation in accordance with the relevant ASTM or EN standard. For foils intended for electrical use, ask for IEC‑type test reports, dielectric strength data and confirmation of purity (e.g., 99.5 % Al for 1050 foil). Verify that the supplier can provide ISO 9001 certification, CE documentation where applicable, and packaging specifications such as coil diameter, pallet weight and moisture protection. It is prudent to obtain a physical sample of the specific alloy or foil thickness before confirming bulk quantities, and to confirm lead times, minimum order quantities and the chosen Incoterm (FOB or CIF).

What aluminium grades does Haomei Aluminum offer for marine applications?

The catalogue includes marine‑grade 5083 aluminium plate, 5052 marine‑grade sheets and checker plates, as well as 3003‑based gutter coil with PVDF coating. These alloys meet typical marine standards such as ASTM B209 and provide corrosion resistance in seawater environments.

How can I obtain material certification for a specific alloy?

Request a mill test certificate (MTC) that details the exact chemical composition, tensile strength, elongation and temper per ASTM B209 or EN 573. The supplier should provide the certificate alongside the commercial invoice before shipment.

What are the typical packaging and shipping options for aluminium coils?

Aluminium coils are usually wound on steel cores, wrapped in anti‑corrosion film, and stacked on wooden pallets. They are shipped in 20‑ft or 40‑ft containers under FOB or CIF terms, with weight limits respecting container payload capacities.

Which HS codes apply to the aluminium plates and foils listed?

Most aluminium plates, sheets and colour‑coated coils use HS 7606.12, while certain plates and foils fall under HS 7606.11. Thin foils for packaging and electronics are classified under HS 7607.11, and laminated foils under HS 7607.19.

What certifications should I request when sourcing electrical‑grade aluminium foil?

Ask for IEC‑type test reports, a material purity certificate (e.g., 99.5 % Al for 1050 foil), and CE marking documentation if the foil will be used in EU‑bound electrical equipment. ISO 9001 quality‑management certification is also commonly required.

What is the minimum order quantity and lead time for 5083 aluminium plate?

The supplier typically sets a minimum order of one standard pallet (approximately 1 ton) for 5083 plate, with a lead time of 4‑6 weeks from order confirmation, depending on thickness and temper.

Are the concrete mixers and pump trucks exported under the same supplier profile?

Yes, both the HM4.0 self‑loading concrete mixer and the 32‑34‑36 m concrete pump truck are listed under HS 8474.31 and are part of the same product catalogue offered by Haomei Aluminum.

How are the aluminium products coated for corrosion resistance?

Colour‑coated coils such as the 3003 and 3105 variants use PE or PVDF coatings applied by extrusion, meeting EN 14600 paint‑system standards. Marine‑grade plates like 5083 are often supplied in a T‑6 temper that provides inherent corrosion resistance without additional coating.