About Guangzhou Fengwang Technology Co., Ltd - Zipper Bags Supplier in China

Guangzhou Fengwang Technology Co., Ltd is based in China and lists 16 active zipper products in its catalogue. The company focuses on zipper components for bags, apparel and footwear, covering metal, nylon and plastic variants. Products include 5# size eco‑friendly metal zippers, waterproof long‑chain nylon zippers, invisible roll zippers and various metal zipper sliders. Two items carry explicit HS codes: metal zippers with base‑metal alloy are classified under HS 9607.11 and zinc or brass alloy sliders under HS 9607.19. The catalogue also references waterproof and low‑price metal zippers without separate HS details.

Product Range and Specialties of Guangzhou Fengwang Technology Co., Ltd

The catalogue lists metal zippers with base‑metal alloy (steel or zinc teeth on polyester tape), zinc‑alloy or brass sliders, waterproof nylon chain zippers, invisible roll zippers and plastic zip fasteners. Typical industry grades for metal zippers range from zinc‑alloy (often plated with nickel or chrome) to brass and aluminum, with tensile strengths measured in the 150 - 250 MPa range. Nylon chain zippers are usually rated for water resistance of 3 mm water column and are supplied in 5# or 10# sizes. Invisible roll zippers are supplied in continuous rolls, allowing custom lengths and are commonly tested for seam strength and stitch pull‑out resistance.

Buyers often request specifications such as tooth pitch (e.g., 5 mm for 5#), slider material, coating type (nickel, chrome, brass plating), and water‑proof performance (ISO‑based test for water ingress). Standard packaging includes 20 ft containers with bulk cartons of 1 000 pcs per carton, or individual poly‑bag packs for small orders. The HS codes 9607.11 cover metal zippers with metal teeth, while 9607.19 covers other metal zippers such as brass or zinc alloy sliders, aligning with customs tariffs worldwide.

Trade and Export Information - Guangzhou Fengwang Technology Co., Ltd

China is a leading exporter of zippers, supplying the United States, European Union, Japan and Southeast Asian markets. HS chapter 96.07 captures all zipper products, with sub‑heading 9607.11 for metal zippers with metal teeth and 9607.19 for other metal zippers, which determines duty rates in most trade agreements. Export shipments typically use FOB Guangzhou ports, with containers loaded in 20 ft or 40 ft units depending on order volume. Buyers outside China often require compliance with REACH (EU) and CPSIA (USA) for metal content, as well as ISO 9001 certification for the manufacturing system.

Common certification requests include ISO 9001 quality management, Oeko‑Tex Standard 100 for textile‑related accessories, and third‑party test reports for tensile strength, corrosion resistance and water‑proof performance. Packaging standards follow ISPM 15 for wood‑based pallets, and containers are sealed with tamper‑evident seals. Importers usually arrange insurance and freight under CIF or DDP terms, while customs brokers verify the HS code and country of origin marking on the commercial invoice.

Sourcing from Guangzhou Fengwang Technology Co., Ltd - Buyer Guidance

When sourcing zippers from Guangzhou Fengwang, buyers should request a product datasheet that lists tooth pitch, material composition, coating, and water‑proof rating. Samples of the specific slider type and tape material allow verification of dimensional tolerances and finish quality before bulk purchase. It is advisable to obtain third‑party test reports for tensile strength (minimum 150 MPa) and corrosion resistance, especially for metal zippers intended for outdoor or footwear use.

Buyers should confirm that the supplier can provide the required certifications such as ISO 9001, REACH compliance certificates and, if needed, Oeko‑Tex test results. Verify the HS code declared on the commercial invoice matches the product description (9607.11 for metal teeth zippers, 9607.19 for other metal sliders). Clarify packaging details, MOQ (often 5 000 pcs per style) and lead time, which typically ranges from 15 to 30 days after sample approval.

What types of zipper materials does the supplier offer?

The supplier lists metal zippers made from base‑metal alloy (steel or zinc teeth with polyester tape), zinc‑alloy or brass sliders, waterproof nylon chain zippers and plastic zip fasteners.

Which HS codes apply to the listed products?

Products with metal teeth and metal tape are classified under HS 9607.11, while zinc‑alloy or brass sliders fall under HS 9607.19. Other items without a specific code are still covered by chapter 96.07 for zippers.

What are the common size standards for the zippers?

The catalogue mentions 5# size, which corresponds to a tooth pitch of approximately 5 mm; larger sizes such as 10# use a 10 mm pitch. Size determines compatible tape widths and slider dimensions.

What certifications should a buyer request for Chinese zipper exports?

Buyers typically request ISO 9001 quality‑management certification, REACH compliance for metal content, and, when the zipper is used in garments, Oeko‑Tex Standard 100 or similar textile safety certificates.

How are the zippers packaged for international shipment?

Standard export packaging uses bulk cartons holding around 1 000 pieces each, stacked in 20 ft containers; smaller orders may be packed in poly‑bags within cartons. Pallets comply with ISPM 15 if wood is used.

What is the typical lead time and minimum order quantity?

After sample approval, production lead time is usually 15 - 30 days. Minimum order quantities are commonly 5 000 pieces per style, though the supplier may adjust based on product type.

How can a buyer obtain a sample and test report?

Buyers can request a pre‑shipment sample together with a third‑party test report covering tensile strength, coating thickness and water‑proof performance; the supplier usually ships samples under FOB terms.