About Enrich Ceramic - Tile Supplier in India

India is a major producer of ceramic and porcelain tiles and Enrich Ceramic lists 11 distinct tile products in its online catalogue. The catalogue includes digital wall tiles sized 200 × 600 mm and 300 × 450 mm, ceramic floor tiles in 300 × 300 mm, 400 × 400 mm, 600 × 600 mm and 600 × 600 mm formats, glazed porcelain tiles of 600 × 600 mm and 600 × 1200 mm, and large‑format porcelain slab tiles ranging from 800 × 1600 mm up to 1200 × 2400 mm. All items are grouped under the three top categories reported - Porcelain Tiles, Ceramic Tiles and Wall Tiles - and fall within the standard HS chapter 69 tariff headings for ceramic products.

The listed products cover both wall‑covering and floor‑covering applications. Digital wall tiles are intended for high‑resolution printed designs, while the ceramic floor tiles are typical glazed or matte finishes for residential and commercial spaces. The glazed porcelain tiles and slab tiles are marketed for high‑traffic interior and exterior areas, offering larger format options that reduce grout lines. No additional product attributes such as certifications or material composition are specified in the catalogue.

Product Range and Specialties of Enrich Ceramic

The catalogue’s size range matches common industry specifications for ceramic and porcelain tiles. Ceramic floor tiles of 300 × 300 mm to 600 × 600 mm are usually produced with a thickness of 8‑10 mm, water absorption below 0.5 % and a slip resistance rating of PEI 3‑4 for residential use. Glazed porcelain tiles in 600 × 600 mm and 600 × 1200 mm typically meet a water absorption limit of 0.5 % or less, a thickness of 9‑12 mm, and a PEI rating of 4‑5 for commercial traffic. Large‑format porcelain slab tiles (800 × 1600 mm to 1200 × 2400 mm) are often supplied with a thickness of 10‑15 mm, low porosity, and are suitable for both interior flooring and exterior cladding. Digital wall tiles, such as the 200 × 600 mm and 300 × 450 mm formats, are printed on a ceramic base and generally conform to a surface hardness of 6‑7 Mohs and a colour fastness rating of ≥ 4 on the ISO 105-A02 scale.

Trade and Export Information - Enrich Ceramic

India exports ceramic and porcelain tiles primarily to the Middle East, Europe, Africa and North America, with the HS code 6907 covering most of the listed formats. Export shipments are commonly packed in wooden crates or reinforced cardboard boxes, each crate holding approximately 1.5 m² of 600 × 600 mm tiles, and loaded into 20‑ft containers that can accommodate roughly 300 m² of such tiles. Buyers typically request ISO 9001 quality management certification, CE conformity for European markets, and ASTM C1028 slip‑resistance test reports. Indian tile manufacturers also adhere to the Bureau of Indian Standards (BIS) specifications for ceramic products, which are often cited in export documentation. Standard Incoterms used for these shipments include FOB (Port of Mumbai or Chennai) and CIF to the buyer’s destination port.

Sourcing from Enrich Ceramic - Buyer Guidance

When sourcing tiles from Enrich Ceramic, buyers should request a product data sheet that lists water absorption, PEI rating, thickness, dimensional tolerance (usually ±1 mm) and surface hardness. Independent laboratory test reports for slip resistance (ASTM C1028) and colour fastness (ISO 105) are standard documents that help verify compliance with market requirements. Buyers are advised to ask for ISO 9001 certification and any CE or BIS test certificates that the supplier can provide, as these indicate conformity with international quality standards. Typical minimum order quantities for the listed formats range from 10 m² to 30 m² per size, with lead times of 30‑45 days after receipt of a confirmed purchase order.

What tile sizes does Enrich Ceramic offer?

The catalogue includes digital wall tiles of 200 × 600 mm and 300 × 450 mm, ceramic floor tiles of 300 × 300 mm, 400 × 400 mm, 600 × 600 mm and 600 × 600 mm, glazed porcelain tiles of 600 × 600 mm and 600 × 1200 mm, and porcelain slab tiles ranging from 800 × 1600 mm to 1200 × 2400 mm.

Which HS code applies to the tiles listed by Enrich Ceramic?

The products fall under HS chapter 69, specifically heading 6907 which covers ceramic tiles, polished blocks, and similar products.

What certifications should a buyer verify for Indian porcelain tiles?

Buyers typically verify ISO 9001 quality‑management certification, CE marking for European markets, and any applicable BIS or ASTM test reports for water absorption, slip resistance and strength.

What are the common technical specifications for the porcelain slab tiles?

Porcelain slab tiles are usually produced with a thickness of 10‑15 mm, water absorption ≤ 0.5 %, low porosity, and are suitable for both interior flooring and exterior cladding applications.

What packaging and container capacities are standard for these tiles?

Tiles are packed in reinforced wooden crates or double‑wall cardboard boxes; a 20‑ft container can hold roughly 300 m² of 600 × 600 mm tiles, while a 40‑ft container accommodates about 600 m² of the same size.

What documentation is recommended before placing an order?

Request a product data sheet, independent test reports for water absorption and slip resistance, ISO 9001 certificate, and any CE or BIS conformity certificates relevant to the target market.

What is the typical minimum order quantity and lead time?

Minimum order quantities generally start at 10 m² per size, and the supplier indicates a production lead time of 30‑45 days after order confirmation.

Which markets commonly import Indian ceramic tiles?

Key import markets include the United Arab Emirates, Saudi Arabia, Qatar, European Union countries such as Germany and the UK, South Africa and the United States, where buyers seek large‑format porcelain and decorative wall tiles.