About Econ Arch Systems LLP - Mechanical Seals Supplier in India

India hosts Econ Arch Systems LLP, which currently lists nine distinct products across its catalogue. The supplier’s top categories include Sanitary Wares, Mechanical Seals, Tempered Glass, Aluminum Hardwares, Cupboards, Doors, Gates, Grills & Windows, and Magnets & Magnetic Products. The product list features several seal types - H Type Shower PVC Seal - Side Seal, D Type - Side Seal, Bottom Wipes with hard and soft lips, and a Glass‑to‑Glass I Type Seal - plus two aluminum extrusion profiles and a magnetic seal. The two aluminum items are recorded under HS code 7604.29 and are manufactured from Aluminum Alloy 6063‑T5, a common extrusion grade. The magnetic seal is coded 8505.11 and combines a PVC extrusion with embedded ferrite magnets.

Product Range and Specialties of Econ Arch Systems LLP

The mechanical seal offerings include side‑seal designs (H and D types) and bottom‑wipe configurations with hard lips of 10 mm and 17 mm as well as a soft‑lip version of 15 mm. In the industry, side‑seal and wipe‑type seals are typically specified to ISO 2146 or API 682 standards, with lip materials ranging from carbon‑graphite to ceramic composites depending on pressure and temperature requirements. The aluminium hardware items - H Profile With Hard Lip and Sliding Door Profile - are both extruded from 6063‑T5 alloy, a temper that provides a tensile strength around 190 MPa and a typical surface finish of 0.8 µm RMS, suitable for architectural framing and door systems. The magnetic seal combines a PVC extrusion (often rated for 70 °C continuous use) with ferrite magnets; buyers usually verify magnetic flux density (e.g., > 0.2 T) and seal compression force.

Trade and Export Information - Econ Arch Systems LLP

India’s aluminium extrusion sector exports heavily to the Middle East, East Africa, and Southeast Asian construction markets, where HS chapter 76 products such as 7604.29 are routinely imported for building hardware. Mechanical seals and magnetic sealing components are commonly shipped to oil‑and‑gas, water‑treatment, and food‑processing plants in Europe and the United Arab Emirates, with HS codes in chapters 84 and 85 often subject to CE marking or ISO 9001 compliance checks. Typical export documentation includes a commercial invoice, packing list, certificate of origin, and where required, a material test report for the 6063‑T5 alloy. Buyers frequently request FOB terms from Indian ports, but CIF shipments to distant markets are also standard, using 20‑ft or 40‑ft containers with wooden crates for aluminium profiles and bulk packaging for seals.

Sourcing from Econ Arch Systems LLP - Buyer Guidance

When evaluating Econ Arch Systems LLP, buyers should request product data sheets that detail seal dimensions, pressure ratings, and material composition. For the aluminium profiles, a mill test report confirming the 6063‑T5 temper, chemical analysis, and tensile strength is standard, while the magnetic seal should be accompanied by a magnetic flux density test report. It is advisable to obtain a sample of each seal type to perform leakage and compression tests before confirming larger orders, and to verify that the HS code classification matches the supplied documentation.

What mechanical seal types are listed in the catalogue?

The catalogue includes an H Type Shower PVC Seal - Side Seal, a D Type - Side Seal, Bottom Wipe With Hard Lip (10 mm and 17 mm), Bottom Wipe With Soft Lip (15 mm), and a Glass‑to‑Glass I Type Seal. Each item is described as a side‑seal or wipe‑type seal used in sanitary and industrial applications.

Which HS codes apply to the aluminium hardware products?

Both the H Profile With Hard Lip and the Sliding Door Profile are classified under HS code 7604.29, which covers aluminium alloy building hardware and extrusions. This code is used worldwide for customs clearance of similar aluminium profiles.

What material is used for the aluminium profiles?

The profiles are manufactured from Aluminium Alloy 6063‑T5, a temper commonly selected for extrusion because of its good corrosion resistance and a typical tensile strength of about 190 MPa. The T5 temper indicates that the alloy was cooled after extrusion and then artificially aged.

Which industry standards are typically required for mechanical seals?

Industrial buyers usually require compliance with ISO 9001 quality management, and for high‑pressure applications they reference API 682 seal design standards. Material certifications such as ASTM A967 for aluminium alloys are also frequently requested.

How is the magnetic seal constructed and what documentation is needed?

The Magnetic Seal 180 Deg consists of a PVC extrusion body with embedded ferrite magnets, and it is recorded under HS code 8505.11 for magnetic products. Buyers normally ask for a magnetic flux density test report and a PVC material safety data sheet.

What are the typical packaging and shipping methods for these products?

Aluminium profiles and seals are usually packed in wooden crates or bulk bags, loaded into 20‑ft or 40‑ft containers for ocean freight. Magnetic seals are often boxed in cardboard with protective film. Export shipments from India commonly use FOB or CIF Incoterms.