About Echo Chemical - Industrial Chemicals Supplier in Germany

Germany, located in the European chemical hub, lists eleven active products across industrial chemicals, printing inks, food chemicals and laboratory reagents. The catalogue includes Screen Printing Emulsion E‑10, E‑10A Printing Emulsion, E‑20 Printing Emulsion, Bio‑Chemical, Gold Melting Technology Chemical, Fine Chemical, Solvent, Reagent, HPE Reagent and two grades of Food Grade Ethanol (99.5 % purity and 95 % purity). Both ethanol entries carry HS code 2207.10 and are described as ethanol (C2H5OH) with specified purity levels for food use. The remaining items fall under broader HS chapters for organic and miscellaneous chemicals, reflecting typical industrial chemical classifications. The product set therefore spans high‑purity solvents, screen‑printing emulsions and analytical reagents suitable for diverse manufacturing and laboratory applications.

Product Range and Specialties of Echo Chemical

The listed printing emulsions (E‑10, E‑10A, E‑20) are water‑based or solvent‑based formulations used for screen‑printing on textiles and substrates; industry grades commonly specify solids content between 10 % and 25 %, viscosity measured in mPa·s at 25 °C, and a drying time of 5‑15 minutes after exposure. Food Grade Ethanol at 99.5 % purity aligns with the EU food‑additive standard for beverage‑grade alcohol, while the 95 % grade is typical for flavor extraction and food‑processing solvents. Laboratory reagents such as the generic “Reagent” and “HPE Reagent” are usually supplied as analytical‑grade chemicals with purity ≥98 % and accompanied by a Certificate of Analysis. Fine Chemicals and the Gold Melting Technology Chemical are specialty organics that often require specification sheets detailing melting point, density and hazard classifications. Solvents listed without further detail are typically aromatic or aliphatic hydrocarbons, supplied in bulk drums or IBCs and conforming to standard safety data sheet (SDS) formats.

Trade and Export Information - Echo Chemical

Germany ranks among the EU’s top exporters of specialty chemicals, and shipments of organic chemicals (HS chapter 29) and miscellaneous chemicals (HS chapter 38) are routinely routed to Europe, North America and Southeast Asia. Ethanol classified under HS 2207.10 is subject to EU food‑safety regulations, REACH registration and, for export, may require a phytosanitary certificate when destined for certain Asian markets. Buyers generally request ISO 9001 or ISO 14001 quality management certificates, REACH compliance statements and, for food‑grade ethanol, a food‑grade certification such as EU Regulation (EC) No 1334/2008. Typical packaging includes 200 L steel drums, 1 000 L IBCs for bulk ethanol, and 20 kg polyethylene bags for emulsions, shipped under Incoterms like FOB Hamburg or CIF Shanghai. Logistics considerations include the need for UN‑rated containers for hazardous solvents and temperature‑controlled storage for high‑purity ethanol.

Sourcing from Echo Chemical - Buyer Guidance

When sourcing ethanol, request a recent Certificate of Analysis showing exact % ABV, water content and microbiological limits, as well as a REACH‑compliance statement. For printing emulsions, ask for a data sheet that lists solids content, viscosity range, flash point and recommended substrate compatibility; a sample of 5‑10 L is common for trial runs. Laboratory reagents should be accompanied by an analytical certificate specifying purity, assay method and expiry date; buyers often verify the presence of an ISO 9001 quality system audit report. Verify packaging integrity - drums should be sealed with tamper‑evident caps and labeled with UN numbers for hazardous solvents. Confirm lead times, which for bulk ethanol typically range from 2‑4 weeks after order confirmation, while emulsions and reagents may require 1‑2 weeks depending on production scheduling.

What HS code applies to the Food Grade Ethanol products?

Both Food Grade Ethanol (99.5 % purity) and the 95 % grade are classified under HS code 2207.10, which covers alcoholic beverages and ethanol for food use.

Are the printing emulsions suitable for textile screen printing?

The emulsions (E‑10, E‑10A, E‑20) are formulated for standard screen‑printing applications on textiles and other substrates. Technical data sheets provide solids content, viscosity and drying time for process adjustment.

What documentation should I request for the laboratory reagents?

Buyers should request a Certificate of Analysis, an SDS, and, if available, an ISO 9001 audit report to confirm analytical‑grade purity and compliance with laboratory standards.

Is the Gold Melting Technology Chemical hazardous?

The product is classified under HS chapter 38 as a miscellaneous chemical and requires an SDS that lists hazard class, handling precautions and appropriate UN packaging codes.

What are typical packaging options for bulk ethanol shipments?

Bulk ethanol is normally shipped in 200 L steel drums or 1 000 L IBCs, sealed with UN‑rated caps and labeled with the appropriate hazard symbols.

Which certifications are commonly required for food‑grade chemicals from Germany?

Importers usually request REACH registration, EU food‑grade certification (e.g., compliance with Regulation EC 1334/2008) and a recent Certificate of Analysis confirming purity levels.

What are the usual lead times for the printing emulsions?

Lead times for the emulsions are typically 1‑2 weeks after order confirmation, depending on batch size and any required custom formulation adjustments.

Can I obtain a sample before placing a full order?

Yes, most suppliers provide a trial sample of 5‑10 L for emulsions or a 1‑L bottle for ethanol, allowing buyers to test performance before committing to larger volumes.