About Dar Al Etimad Plastic Factory Llc - Recycled Plastic Supplier in United Arab Emirates

The company operates out of the United Arab Emirates and currently lists six distinct plastic‑related products. Its catalogue covers recycled HDPE colour injection regrind, a polypropylene copolymer (PPCP), standard PP injection grade, a milky‑white PP‑CP, soft PVC, and ABS lead‑battery scrap. These items fall under the broader categories of recycled plastic, plastic raw materials, and battery scraps as indicated in the supplier profile. No additional product lines beyond these six are recorded in the available data.

The HDPE colour injection regrind is classified under HS chapter 39 for plastics in the 3901.10 sub‑heading, while the polypropylene grades (PPCP, PP injection grade, PP‑CP milky white) correspond to HS 3902.10. Soft PVC aligns with HS 3904.10, and ABS lead‑battery scrap is typically recorded under HS 8509.80 for waste batteries. All six products are offered in bulk form suitable for re‑processing or manufacturing, with typical packaging formats such as 25 kg drums or bulk containers. The supplier’s catalogue does not specify certifications, so buyers should verify compliance with relevant industry standards.

Product Range and Specialties of Dar Al Etimad Plastic Factory Llc

Dar Al Etimad Plastic Factory Llc lists HDPE colour injection regrind, which in the market is supplied in melt flow index (MFI) ranges of 2 - 6 g/10 min and colour consistency measured by CIE LAB values. The polypropylene offerings include a generic copolymer (PPCP) used for impact‑resistant applications, an injection‑grade PP with MFI 5 - 12 g/10 min, and a milky‑white PP‑CP often specified with a haze below 10 % and melt flow around 8 g/10 min. Soft PVC is typically supplied with a plasticiser content of 30 - 40 % and a Shore A hardness of 70 - 80. ABS lead‑battery scrap is processed to remove lead and is graded by particle size, commonly passing a 2 mm sieve.

Industry standards for these polymers frequently reference ISO 1133 for melt flow, ISO 1672 for PVC, and IEC 60950 for ABS scrap handling. Buyers often request certificates of analysis confirming intrinsic viscosity, ash content, and heavy‑metal limits (e.g., lead < 0.1 %). Typical bulk shipments are loaded in 20‑ft or 40‑ft containers, with moisture content below 0.5 % for HDPE and PP regrind to ensure processing stability.

Trade and Export Information - Dar Al Etimad Plastic Factory Llc

The United Arab Emirates is a major re‑export hub for polymer granules, with most shipments of HDPE, PP and PVC destined for manufacturers in the Gulf Cooperation Council, South‑East Asia, and the European Union. HS 3901‑3904 families are subject to customs inspections that verify compliance with REACH (EU) and GCC technical regulations, and buyers frequently request a Material Safety Data Sheet (MSDS) and a Certificate of Origin for preferential duty treatment under the GCC‑UAE trade agreement. Standard logistics involve FOB or CIF terms, with products packed in sealed bulk bags or 25 kg drums, and loaded into 20‑ft containers for regional customers or 40‑ft containers for longer‑haul routes.

Battery scrap such as ABS lead‑battery material falls under hazardous waste classifications; exporters must provide a waste‑transfer note and ensure the material meets Basel Convention guidelines. Importers in Europe and North America typically demand an independent laboratory test confirming lead concentration and absence of PCB. Proper labeling according to UN 3480 for batteries and compliance with local environmental statutes are essential for smooth customs clearance.

Sourcing from Dar Al Etimad Plastic Factory Llc - Buyer Guidance

Prospective buyers should request a recent Certificate of Analysis that details melt flow index, density, colourimetric values for the HDPE regrind, and particle‑size distribution for the ABS scrap. For polypropylene grades, confirming the MFI range, melt temperature and impact strength (e.g., Izod > 30 J) helps match the material to injection‑moulding requirements. An MSDS and a declaration of compliance with REACH or GCC standards are standard documents to obtain before finalising a contract.

Typical minimum order quantities are 5 metric tonnes for regrind and 2 metric tonnes for bulk PVC, though the supplier can adjust packaging to 25 kg drums upon request. Lead times generally range from 15 to 30 days after receipt of a pro‑forma invoice, depending on product availability and export documentation. Buyers should verify that the shipment is sealed, labelled with the correct HS code, and that a pre‑shipment inspection report is available if required by the destination country.

What HS codes are used for the listed products?

HDPE colour injection regrind is normally classified under HS 3901.10, the polypropylene grades under HS 3902.10, soft PVC under HS 3904.10, and ABS lead‑battery scrap under HS 8509.80 for waste batteries.

Which quality parameters are typical for HDPE colour injection regrind?

Buyers usually look for a melt flow index between 2 and 6 g/10 min, colour deviation within ±2 ΔE in CIE LAB, and moisture content below 0.5 % to ensure consistent injection performance.

What documentation should be requested for the polypropylene products?

A Certificate of Analysis showing melt flow index, density, impact strength and any colour specifications, together with an MSDS and a REACH compliance statement, are standard requirements.

How is the ABS lead‑battery scrap prepared for export?

The scrap is mechanically processed to remove bulk lead, screened to a maximum particle size of 2 mm, and accompanied by a waste‑transfer note, lead‑content test report and an MSDS indicating hazardous classification.

What packaging options are available for bulk polymer shipments?

Typical packaging includes sealed bulk bags (up to 1 tonne) or 25 kg drums for regrind, and the material can also be loaded directly in 20‑ft or 40‑ft containers on a truck‑load basis.

Which Incoterms are commonly used for these exports?

Suppliers from the UAE frequently use FOB (Free on Board) for regional buyers and CIF (Cost, Insurance, Freight) for longer‑distance shipments, allowing the buyer to control insurance and freight arrangements.

What are the usual minimum order quantities and lead times?

Minimum orders are generally 5 tonnes for HDPE or PP regrind and 2 tonnes for PVC, with lead times ranging from 15 to 30 days after order confirmation, depending on product availability and required export documentation.