About Combo Group Co., Ltd. - Automobile Tyres, Tubes & Wheels Supplier in China

Combo Group Co., Ltd. is based in China and currently lists seven distinct tyre products in its catalogue. The portfolio covers radial truck tyres such as 12.00R20 and 11R22.5, a lower‑heat‑build variant of the 11R22.5, as well as a solid tyre sized 18*7‑8. Additional offerings include a 8.25‑16 tyre, a Reach‑certified 11.00R20 for trucks and buses, a passenger car tyre 185/60R14, and a 225/70R19.5 truck tyre. Each entry specifies size and application but does not include HS codes in the source data. The supplier is classified as an imported, harbor‑tier provider, indicating it sources goods for re‑export rather than manufacturing them. The focus on both automobile tyres and industrial supplies aligns with the listed top categories.

The catalogue reflects a mix of radial and solid tyre constructions, covering both light‑vehicle and heavy‑duty segments. Sizes range from 8.25‑16 for smaller commercial vehicles to 12.00R20 for larger trucks, illustrating breadth across load capacities. The inclusion of a Reach‑certified model suggests compliance with European safety standards for buses and trucks. No additional product attributes such as load index or speed rating are provided, limiting detail to dimensions and type. Buyers can expect the listed seven tyre models to be available for bulk purchase under typical export terms.

Product Range and Specialties of Combo Group Co., Ltd.

Combo Group Co., Ltd. lists radial truck tyres in standard sizes such as 12.00R20, 11R22.5, 225/70R19.5 and a smaller 8.25‑16, alongside a solid tyre 18*7‑8 and a passenger car tyre 185/60R14. In the tyre industry, radial truck tyres of these dimensions are commonly produced in ply ratings from 8 to 12, with load indices matching the vehicle’s gross weight. Typical specifications include a tread depth of 8‑10 mm, a speed rating ranging from S (180 km/h) to H (210 km/h), and a nominal rim width compatible with the listed sizes. Reach certification, referenced for the 11.00R20 model, aligns with the European ECE R30 safety standard and indicates compliance with noise and durability tests. Solid tyres such as the 18*7‑8 are usually made from reinforced rubber compounds and are used for industrial equipment where puncture resistance is critical.

Industry practice for passenger tyres like the 185/60R14 includes ISO 9001 quality management, DOT approval for the US market, and a typical tread wear rating of 300‑500 km. Buyers often request a product data sheet that lists the tyre’s load index, speed rating, tread pattern, and material composition (e.g., natural rubber, synthetic blend). For truck tyres, the common grade is “high‑traction” or “low‑rolling‑resistance” depending on the intended usage, and manufacturers may offer options such as steel‑belted or nylon‑belted constructions. The catalogue’s focus on radial designs reflects the market trend toward lower fuel consumption and improved handling compared with bias‑ply alternatives.

Trade and Export Information - Combo Group Co., Ltd.

China is a major exporter of tyres, with HS chapter 40 (particularly code 4011) covering pneumatic tyres for motor vehicles. Export shipments from Chinese tyre manufacturers typically target regions in Southeast Asia, the Middle East, Africa, and Latin America, where cost‑effective bulk tyres are in demand. Buyers in the European Union often require ECE R30 or R54 certification, while North American importers look for DOT compliance and a Certificate of Origin. Logistics for tyre shipments frequently involve 20‑foot or 40‑foot containers, with each container holding between 80 and 120 standard passenger tyres or fewer larger truck tyres due to size constraints. Common Incoterms used include FOB Shanghai or CIF destination port, depending on the buyer’s preference for freight handling.

Regulatory inspections for tyre imports generally include verification of the tyre’s load index, speed rating, and compliance with the destination country’s safety standards. Chinese exporters may provide a test report from a recognized laboratory covering aspects such as rolling resistance, wet grip, and durability. Packaging is usually on wooden pallets with stretch‑film wrap to protect the sidewalls during transit. Buyers should confirm that the supplier can supply the necessary documentation - such as the Certificate of Conformity, test reports, and any required phytosanitary certificates for rubber products - before finalising the order.

Sourcing from Combo Group Co., Ltd. - Buyer Guidance

When sourcing tyres from Combo Group Co., Ltd., buyers should request detailed product data sheets that list load index, speed rating, ply rating, tread pattern, and rubber compound composition. It is advisable to obtain a third‑party test report confirming compliance with DOT, ECE, or other relevant standards, especially for the Reach‑certified 11.00R20 model. Buyers should also verify the presence of a valid Certificate of Origin and, where applicable, an ISO 9001 quality management certificate, even though the supplier does not list certifications in its profile.

Typical minimum order quantities for bulk tyre purchases range from one full 20‑foot container (approximately 80‑100 units for passenger sizes) to smaller pallet loads for specialty sizes such as the 18*7‑8 solid tyre. Lead times from order confirmation to shipment usually span 30‑45 days, depending on production scheduling and customs clearance. Prospective buyers should request a sample or a trial shipment to validate dimensions, sidewall markings, and performance specifications before committing to larger volumes.

What tyre sizes does Combo Group Co., Ltd. offer?

The catalogue lists seven tyre models, including 12.00R20 and 11R22.5 radial truck tyres, an 8.25‑16 tyre, a solid 18*7‑8 tyre, a Reach‑certified 11.00R20, a passenger 185/60R14 tyre, and a 225/70R19.5 truck tyre.

Are the truck tyres suitable for long‑haul applications?

The listed truck tyres are radial constructions, which are standard for long‑haul use due to lower rolling resistance and improved durability. Buyers should confirm the load index and speed rating to match their specific vehicle requirements.

What certifications should I request for these tyres?

Typical certifications include DOT approval for the United States, ECE R30/R54 for Europe, and a Certificate of Origin for customs. For the Reach‑certified model, request the Reach compliance documentation.

Can I obtain a test report before placing a bulk order?

Yes, buyers should ask the supplier for an independent laboratory test report covering load index, speed rating, rolling resistance, and wet‑grip performance. This report is standard practice for tyre imports.

What are the typical packaging and shipping methods?

Tyres are normally packed on wooden pallets wrapped in stretch film. Shipping is usually via 20‑foot or 40‑foot containers, with FOB Shanghai or CIF destination as common Incoterms.

What is the expected lead time for an order?

Lead times generally range from 30 to 45 days after order confirmation, depending on the specific tyre size and any required certification documentation.

Is there a minimum order quantity?

Bulk orders commonly start at one full container load, roughly 80‑100 passenger tyres or proportionally fewer larger truck tyres. Smaller pallet quantities may be negotiated for specialty sizes.

How can I verify the tyre’s compliance with regional standards?

Request the relevant certificates (DOT, ECE, Reach) and a recent test report. Cross‑checking the tyre markings on the sidewall with the data sheet ensures the supplied product matches the required specifications.