About Clean Coats Pvt Ltd India - Coatings Supplier in India

Clean Coats Pvt Ltd India operates out of India and currently lists twelve distinct products in its catalogue. The portfolio is concentrated in the coatings sector and includes several PVC flooring solutions, reflecting the company’s focus on industrial and infrastructure applications. All listed coating items fall under HS chapter 32, specifically HS code 3208.90, which covers paints, varnishes and similar polymer coatings. The two polymer resin systems are recorded under HS codes 3907.20, 3909.31, and a water‑repellant under 3824.90. The supplier is classified in the harbor trust tier, indicating a moderate level of verification.

The catalogue includes internal epoxy‑based coatings for potable water pipelines, thermosetting epoxy and polyolefin systems for external pipelines, and a range of polyurethane formulations such as two‑component floorings, car‑park coatings and low‑viscosity injection grouts. Water‑based acrylic and polyurethane paints such as Flex Kote AC and Hygienic Water Based Polyurethane Paint are also listed, alongside a silane‑siloxane water repellent product. PVC flooring mentions are present though specific HS codes are not supplied. The product set therefore spans epoxy, polyurethane, acrylic and silane‑siloxane chemistries, each aligned with the relevant HS code families indicated.

Product Range and Specialties of Clean Coats Pvt Ltd India

The listed items comprise internal epoxy polymer coating for potable water lines, multi‑layer pipeline coatings (FBE, 3LPE, 3LPP), and specialty polyurethane systems for flooring, car‑park decks and injection grouting. Additional water‑based solutions include an acrylic co‑polymer anti‑carbonation paint, a single‑component water‑based polyurethane paint, and a two‑component water‑based polyurethane (WPU) coating. Polyurethane resin systems (C Crete HF) and a silane‑siloxane water‑repellant round out the catalogue, while two PVC flooring entries are noted without detailed specifications.

In the coatings industry, epoxy systems for water pipelines are typically applied to a dry film thickness of 100 - 300 µm and must meet ASTM D6383 for adhesion and ISO 12944‑2 for corrosion protection. Polyurethane floorings for industrial traffic are commonly supplied in 1 - 3 mm thickness and are tested to ISO 2813 for wear resistance. Water‑based acrylic paints for anti‑carbonation are graded by solids content (usually 30 - 45 %) and alkaline resistance per ASTM C928. Polyurethane injection grouts are specified by viscosity (often 10 - 30 cPs at 25 °C) and compressive strength (≥30 MPa). PVC flooring products generally target a 2 - 5 mm thickness and are evaluated for tensile strength (≥2 MPa) and impact resistance. Buyers usually request Material Safety Data Sheets (MSDS), technical data sheets, and conformity to ISO 9001 or ISO 14001 where applicable.

Trade and Export Information - Clean Coats Pvt Ltd India

India ranks among the top global exporters of industrial coatings, with HS 3208.90 products primarily shipped to the Middle East, Africa and Southeast Asian construction markets. The polymer‑based pipeline coatings and polyurethane floorings are often packed in 200 L steel drums or 1 000 L IBCs, allowing a 20‑ft container to carry roughly 20 tonnes of liquid coating and a 40‑ft container up to 38 tonnes. Export documentation typically includes a commercial invoice, packing list, Certificate of Origin and, for EU destinations, REACH compliance statements. Commonly required certifications for these categories are ISO 9001 quality management, ISO 14001 environmental management, and where applicable CE marking for products entering the European Economic Area. Incoterms such as FOB Mumbai or CIF Dubai are standard, and freight forwarders often arrange temperature‑controlled shipping for water‑based paints to preserve viscosity and prevent premature curing.

Sourcing from Clean Coats Pvt Ltd India - Buyer Guidance

When sourcing from Clean Coats, buyers should request the latest Material Safety Data Sheet, a technical data sheet that lists viscosity, solids content, recommended film thickness and curing schedule, and any third‑party test reports such as ASTM D3359 (cross‑cut adhesion) or ISO 2813 (wear). Verification of compliance with ISO 9001 or ISO 14001 is advisable, even though the supplier’s catalogue does not list these certifications explicitly. Typical minimum order quantities for liquid coatings range from 500 L to five 200 L drums, with larger orders often consolidated into 20‑ft containers. Lead times in the Indian coating sector are generally four to six weeks from receipt of a confirmed purchase order and approved test samples. Packaging is usually in sealed steel drums or IBCs, palletized for container loading, and labelled according to HS code and safety regulations.

What types of pipeline coatings does Clean Coats offer?

The catalogue lists internal epoxy‑based coatings for potable water pipelines, as well as thermosetting epoxy, polyethylene and polypropylene systems (FBE, 3LPE, 3LPP) for external pipelines, all classified under HS 3208.90.

Are water‑based polyurethane paints available?

Yes, the supplier provides a Hygienic Water Based Polyurethane Paint and a two‑component water‑based polyurethane (WPU) coating, both identified with HS 3208.90.

Which HS codes apply to the polyurethane floorings?

Polyurethane floorings and car‑park coatings are recorded under HS 3208.90, while the two‑component polyurethane resin system (C Crete HF) uses HS 3907.20 and the low‑viscous injection grout uses HS 3909.31.

What documentation should I request before placing an order?

Request the Material Safety Data Sheet, a technical data sheet with application parameters, and any relevant test reports (e.g., ASTM D3359 adhesion, ISO 12944 corrosion resistance). Confirm whether the supplier holds ISO 9001 or ISO 14001 certifications.

What are typical packaging formats for these coatings?

Liquid coatings are usually supplied in 200 L steel drums or 1 000 L intermediate bulk containers, palletized for container loading. PVC flooring products are commonly shipped in folded rolls on wooden pallets.

What are the common incoterms used for exporting these products?

Exporters from India commonly use FOB Mumbai or CIF Dubai for bulk coating shipments, allowing buyers to arrange inland transport or door‑to‑door delivery.

What are the usual minimum order quantities and lead times?

Minimum order quantities range from 500 L to five 200 L drums, with lead times of four to six weeks after order confirmation and sample approval.

Which markets typically import these Indian coating products?

Major importers include construction and infrastructure firms in the Middle East, African nations, and Southeast Asian countries, where protective and decorative coatings are in high demand.