About Chirag Industry - Building Construction Machineries and Equipments Supplier in India

India hosts Chirag Industry, a supplier that lists ten distinct construction machinery products in its catalogue. The portfolio covers tile cutting machines, concrete block and paver machines, and multifunctional block equipment, each classified under HS headings 8464.xx for tile saws and 8474.xx to 8479.xx for block forming machinery. Products such as the Granite/Marble/Ceramic Tile Cutting Machine (HS 8464.90) and the Marble Stone Cutting Machine (HS 8464.20) feature steel bodies combined with diamond or carbide cutting components. The range also includes concrete block machines like the Chirag Concrete And Solid Block Machine (HS 8474.80) and the Concrete Block/ Brick And Paver Machine (HS 8479.40). All items are positioned within the broader categories of Building Construction Machineries and Equipment, Construction Equipment & Machinery, and Road Construction Machines.

The catalogue specifies material construction for each model, ranging from structural steel frames with hydraulic systems to wear‑resistant molds and hardened alloy components. Hydraulic power units are typically rated between 5 kW and 20 kW, delivering cutting forces suitable for granite, marble, sandstone and laterite slabs up to 30 mm thickness. Block‑forming machines incorporate carbon steel or mild steel frameworks designed to produce solid concrete blocks, colour pavers and interlocking pavers in dimensions from 100 mm × 200 mm × 400 mm up to 250 mm × 250 mm × 600 mm. The inclusion of diamond saw blades in the tile cutting series aligns with industry standards for achieving surface finishes below 0.5 mm roughness. Overall, the ten listed machines address key stages of building material fabrication, from stone cutting to concrete paver production.

Product Range and Specialties of Chirag Industry

The product set includes five tile‑cutting machines covering granite, marble, ceramic and sandstone, each falling under HS 8464 sub‑headings. In the global market, tile saws are commonly supplied with diamond blades graded by grit size (e.g., 120‑180 µm) and rated for cutting thicknesses of 10‑30 mm, with water‑cooling to limit dust and blade wear. Hydraulic tile cutters often meet ISO 9001 quality management and may carry CE marking for European buyers. The block‑forming lineup comprises three models under HS 8474.80 and two under HS 8479.xx, which in the industry are evaluated by output rate (typically 500 - 1500 blocks per hour) and compression strength of the produced concrete (minimum 10 MPa). Buyers usually request specifications such as mold cavity dimensions, hydraulic pressure (up to 200 bar), and power consumption (7‑25 kW).

Trade and Export Information - Chirag Industry

India is a major exporter of construction and road‑building equipment, with Europe, the Middle East, Africa and Southeast Asia representing the largest demand zones for tile cutters and concrete block machines. HS chapter 84 items such as 8464 and 8474 are subject to standard customs valuation and often require a pre‑shipment inspection under the Indian Export Inspection Council for compliance with Indian Standards and destination regulations. Typical certifications requested by importers include ISO 9001, CE marking for EU markets, and BIS certification for Indian standards. Shipping is usually arranged in 20‑ft or 40‑ft containers, with machine dimensions allowing two to three tile cutters per container and up to four block machines per 40‑ft container, packed on wooden pallets with steel frame cradles. Common Incoterms are FOB Mumbai or CIF Dubai, depending on buyer preference.

Sourcing from Chirag Industry - Buyer Guidance

When sourcing from Chirag Industry, buyers should obtain a detailed product datasheet that lists hydraulic pressure, motor power, blade specifications and block dimensions, and verify that the machine complies with the relevant ISO or BIS standards. Requesting a factory test report, CE declaration of conformity (for EU shipments) or an IEIC inspection certificate can confirm compliance before shipment. Typical minimum order quantities are one unit per model, with lead times ranging from 30 to 60 days for standard configurations; custom blade sizes or mold designs may extend the timeline. Machines are normally packed on reinforced pallets, protected with shrink‑wrap and wood braces, and shipped under FOB or CIF terms as agreed.

What categories of machinery does Chirag Industry list?

Chirag Industry lists ten machines divided between tile‑cutting equipment (e.g., Granite/Marble/Ceramic Tile Cutting Machine, Marble Stone Cutting Machine) and concrete block/paver forming machines (e.g., Chirag Concrete And Solid Block Machine, Automatic Block And Paver Block Machine).

Which HS codes apply to the tile‑cutting machines?

The tile‑cutting machines are classified under HS 8464.10, 8464.20 and 8464.90, which cover saws and cutting machines for stone, marble, ceramic and similar materials.

What are the typical power and hydraulic specifications for the block machines?

Block‑forming machines in the catalogue usually employ electric motors between 7 kW and 25 kW and hydraulic systems operating up to 200 bar, delivering production rates of 500 - 1500 blocks per hour.

Which certifications should a buyer request for these machines?

Buyers should ask for ISO 9001 quality‑management certificates, CE Declaration of Conformity for EU destinations, and any Indian BIS or IEIC inspection reports that verify compliance with local standards.

How are the machines packaged for export?

Machines are secured on wooden pallets, wrapped with shrink‑film, and protected with steel frame braces; tile cutters typically fit two to three units in a 20‑ft container, while block machines can be loaded three to four units in a 40‑ft container.

What are the common Incoterms used by Chirag Industry?

Export transactions commonly use FOB from the port of Mumbai or CIF to regional hubs such as Dubai, allowing the buyer to arrange onward freight or receive door‑to‑door delivery.

What is the standard lead time and minimum order quantity?

The standard lead time is 30 - 60 days from order confirmation for standard models, and the minimum order quantity is one unit per machine type unless a bulk discount is negotiated.