About China Lite Heavy Industry Group - Construction Equipment & Machinery Supplier in China

China Lite Heavy Industry Group is based in China and lists five active products across its catalogue. The company’s offerings fall under the top categories of Agriculture, Drilling Machines & Tools, Construction Equipment & Machinery, and Safety & Security Equipment as recorded in the supplier data. Its product portfolio includes material handling and lifting solutions that are commonly classified under HS chapters for cranes and lifting equipment. The catalogue references a range of crane types and a spider boom lift, reflecting typical machinery used in ports, factories and construction sites. No additional company history or size information is provided beyond the listed product count.

The five listed products are a Rubber Tired Gantry (RTG) crane, an Overhead Crane using a steel wheel, a 50‑ton Quayside Container crane, an Electromagnetic Chuck for crane components (HS code 8505.90, constructed with a permanent magnetic circuit and carbon‑steel housing), and a 36‑meter Crawler Type Spider Boom Lift. These items correspond to standard equipment categories such as container handling cranes, overhead lifting devices, and mobile elevated work platforms. The electromagnetic chuck is identified under the HS code family for electromagnetic lifting appliances. The catalogue does not provide further technical specifications or certifications for these items.

Product Range and Specialties of China Lite Heavy Industry Group

The catalogue lists a Rubber Tired Gantry (RTG) crane, typically rated between 30 and 80 tons with a span of 30‑60 m and pneumatic or hydraulic tires suitable for yard operations. The Overhead Crane using a steel wheel is commonly offered with load capacities from 10 to 50 tons, steel‑wheel runners that run on reinforced steel beams, and control systems complying with IEC 60204‑1. The 50‑ton Quayside Container crane is a quay‑side container handler usually featuring a 30‑45 m outreach, rail‑mounted or rail‑free chassis, and a hook‑type spreader for standard 20‑ft and 40‑ft containers. The Electromagnetic Chuck for crane components, recorded under HS code 8505.90, typically provides a magnetic lifting force of 10‑20 tons, uses a permanent magnetic circuit housed in carbon‑steel, and is tested to IEC 61558 safety standards. The 36‑m Crawler Type Spider Boom Lift falls under mobile elevated work platforms, often rated for a platform load of 250‑300 kg, equipped with crawler tracks for rough terrain, and designed to meet EN 280 safety requirements.

Industry practice for these categories includes the use of structural steel grades such as S355 for crane frames, high‑strength alloy wheels for overhead cranes, and aluminum or high‑strength steel for boom lift booms. Electromagnetic lifting devices are frequently supplied with CE marking and a load‑test certificate, while boom lifts are often equipped with dual‑circuit hydraulic systems and anti‑collision sensors. Buyers normally expect detailed specification sheets covering dimensions, load charts, power ratings, and compliance with relevant ISO or EN standards.

Trade and Export Information - China Lite Heavy Industry Group

China is a global exporter of construction and material‑handling equipment, supplying ports, logistics hubs and construction firms in Europe, North America, the Middle East and Southeast Asia. The RTG, overhead and quayside cranes are classified under HS chapter 8426 (Other lifting, loading or handling equipment), while the electromagnetic chuck falls under HS chapter 8505 (Electrical machines and apparatus, other). Typical import requirements include CE conformity, ISO 9001 quality‑management certification, and, where applicable, ISO 14001 environmental certification. Chinese manufacturers often provide pre‑shipment inspection reports from SGS or Bureau Veritas, and shipments are usually packed in steel frames or wooden crates for containerization.

Logistically, crane components larger than 2 m in any dimension are commonly loaded in 40‑foot containers or shipped as break‑bulk on roll‑on/roll‑off vessels. Spider boom lifts that fit within a 2.4 m container footprint are also containerized. Standard Incoterms used by Chinese exporters are FOB Shanghai or Ningbo, with CIF options available for buyers in regions lacking local freight forwarders. Lead times for complete crane assemblies range from four to eight weeks after order confirmation, depending on customization and factory workload.

Sourcing from China Lite Heavy Industry Group - Buyer Guidance

When sourcing from China Lite Heavy Industry Group, buyers should request detailed product data sheets that list load capacities, dimensions, power requirements and the specific steel grades used. For the electromagnetic chuck, a magnetic force test report, CE Declaration of Conformity and an IEC 61558 compliance certificate are typical documents to verify. For cranes and the spider boom lift, buyers normally ask for a load‑test certificate, ISO 9001 audit report, and evidence of compliance with EN 280 (for boom lifts) or relevant national crane safety standards.

Before placing a purchase order, verify that the HS code supplied matches the product description and that the supplier can provide the required pre‑shipment inspection report. Requesting a sample of the magnetic circuit material or a photo of the crane’s control panel can help confirm material quality. Confirm packaging details - steel‑frame pallets for crane sections and reinforced wooden crates for boom lifts - and ensure that the agreed Incoterm and freight forwarder are documented in the contract.

What crane types are included in China Lite Heavy Industry Group’s catalogue?

The catalogue lists a Rubber Tired Gantry (RTG) crane, an Overhead Crane with a steel wheel, and a 50‑ton Quayside Container crane, each suited for yard, factory or port handling applications.

Does the supplier provide specifications for the electromagnetic chuck?

The product entry includes the HS code 8505.90 and notes a permanent magnetic circuit with a carbon‑steel housing; buyers should request the full load‑force test report and CE compliance documents.

What is the typical lift capacity of the spider boom lift offered?

The 36‑meter Crawler Type Spider Boom Lift is commonly rated for a platform load of 250‑300 kg and is designed to meet EN 280 safety standards for mobile elevated work platforms.

Which certifications are generally required for these lifting equipments?

Buyers usually require CE marking, a load‑test certificate, and ISO 9001 quality‑management certification; additional ISO 14001 or specific national safety approvals may be requested depending on the import market.

What HS codes apply to the crane products?

Container‑handling cranes such as the RTG and quayside crane fall under HS chapter 8426, while the electromagnetic chuck is classified under HS code 8505.90.

How are the products typically packaged for export?

Large crane components are packed in steel‑frame pallets or wooden crates suitable for 40‑foot containers; the spider boom lift is shipped in reinforced wooden crates or as break‑bulk depending on dimensions.

What documentation should a buyer request before confirming an order?

Buyers should ask for product data sheets, load‑test certificates, CE Declaration of Conformity, ISO 9001 audit reports, and a pre‑shipment inspection report from a recognized third‑party agency.