About Beisen Hardware Wire Mesh Industry Ltd. - Construction Materials Supplier in China

Beisen Hardware Wire Mesh Industry Ltd. is based in China and lists five active products in its catalogue. The company groups its offerings under the Construction Materials and Sheet Metal Components categories, focusing on various wire mesh and perforated metal solutions. The catalogue includes decorative ring mesh, perforated metal sheets, hexagonal wire netting, stainless‑steel wire mesh with different weaving patterns, and a detailed FAQ document covering mesh specifications. Each entry references typical applications such as architectural facades, industrial screens, and filtration systems, and falls within the HS‑8 chapter 73 family for iron and steel articles.

The product set covers both aesthetic and functional metal meshes. Decorative ring mesh is often supplied with stainless‑steel or carbon‑steel wire gauges ranging from 0.6 mm to 2.0 mm, while perforated metal sheets are cut to standard openings of 2 mm to 10 mm. Hexagonal wire netting typically uses 304 or 316 stainless‑steel with mesh openings of 5 mm to 25 mm. Stainless‑steel wire mesh weaving patterns include plain weave, twill and lock‑stitch, each delivering tensile strengths from 300 MPa to 600 MPa depending on wire diameter and alloy. All items are classified under HS heading 7308, which covers wire mesh and similar articles of iron or steel.

Product Range and Specialties of Beisen Hardware Wire Mesh Industry Ltd.

The catalogue’s four mesh‑type products represent common segments of the global wire‑mesh market. Decorative ring mesh is used for architectural cladding and interior design, and buyers usually specify ring diameter, wire gauge, and finish (e.g., polished, brushed, or powder‑coated). Perforated metal sheets serve filtration, acoustic damping and light‑weight paneling; standard grades include cold‑rolled carbon steel, galvanized steel and stainless steel, with typical sheet thicknesses of 0.5 mm to 3 mm. Hexagonal wire netting is a standard form for fencing, sieving and reinforcement, often supplied in 304/316 stainless‑steel with mesh sizes measured in millimetres. Stainless‑steel wire mesh weaving patterns are selected for strength‑to‑weight ratio, with common specifications such as mesh count (e.g., 10 × 10 mm), wire diameter (0.6 mm‑1.5 mm) and tensile test results. Industry practice also includes offering custom finishes like passivation, electropolishing or epoxy coating to meet corrosion‑resistance requirements.

Trade and Export Information - Beisen Hardware Wire Mesh Industry Ltd.

China is a major exporter of wire mesh and perforated metal products, shipping primarily to Southeast Asia, the Middle East, Europe and North Africa. Buyers typically import under Incoterms CIF or FOB, with goods packed in wooden crates or bulk pallets that fit 20‑ft or 40‑ft containers. HS heading 7308 is routinely inspected by customs for compliance with material composition and weight declarations; many importing countries require a Certificate of Origin and, where applicable, a CE declaration for construction‑grade mesh. Common certifications requested by overseas buyers include ISO 9001 quality management, ISO 14001 environmental management, and compliance with ASTM A123 (zinc coating) or ASTM A240 (stainless‑steel plate) standards. Export logistics from Chinese ports such as Shanghai, Shenzhen or Guangzhou benefit from established container freight services and established pre‑shipment inspection agencies.

Sourcing from Beisen Hardware Wire Mesh Industry Ltd. - Buyer Guidance

When sourcing wire mesh from this supplier, buyers should request a product data sheet that lists wire alloy (e.g., 304, 316), wire diameter, mesh opening, tensile strength and finish. Third‑party test reports for tensile testing (ASTM A555) and corrosion resistance (ASTM B117 salt‑spray) are standard documents to verify compliance. Buyers are advised to confirm the HS code (7308) on the commercial invoice and to obtain a Certificate of Origin to satisfy import duty calculations. Sampling is usually offered in quantities of 1 m² to 5 m², allowing verification of mesh uniformity, edge quality and surface finish before placing larger orders.

What mesh sizes are available for the decorative ring mesh?

Typical ring diameters range from 5 mm to 30 mm, with wire gauges between 0.6 mm and 2.0 mm. Buyers can select finishes such as polished stainless steel or powder‑coat black.

Which material standards apply to the perforated metal sheets?

Sheets are commonly supplied in compliance with ASTM A1018 for cold‑rolled carbon steel, ASTM A123 for zinc‑coated steel, or ASTM A240 for stainless‑steel grades 304/316.

How is hexagonal wire netting classified for export?

It falls under HS heading 7308 and is usually declared by material (stainless steel or carbon steel), mesh opening (5 mm‑25 mm) and wire diameter.

What certifications should I ask for before purchasing stainless‑steel wire mesh?

Request ISO 9001 quality‑management certification, material test reports per ASTM A555, and, if required by the destination, CE marking for construction applications.

What are the typical packaging and container requirements?

Products are bundled in steel‑tied packs, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers. Pallet dimensions follow standard ISO‑EU size (1200 mm × 1000 mm).

What is the usual minimum order quantity and lead time?

Minimum order quantities are generally 500 kg per mesh type, with lead times of 15‑30 working days after receipt of a confirmed purchase order and required test documentation.