About Beijing Bairongfu Co., Ltd. - Industrial Raw Materials Supplier in China

Beijing Bairongfu Co., Ltd. is registered in China and lists 8 active products across five industrial categories: newsprint, plastic raw materials, industrial supplies, filament yarn, and copper scrap. The catalogue spans paper, polyolefins, styrenics, polyester and metal inputs, indicating a trader-style offering aimed at buyers consolidating mixed industrial raw materials from a single Chinese source. The product mix covers paper grade stock (newsprint), thermoplastic resins (HDPE, LDPE, LLDPE, HIPS, GPPS), man-made filament fibres (polyester fibre and FDY), and non-ferrous metal inputs (copper scrap, aluminium ingot). Beijing, as the listed base, sits within a logistics corridor that connects to Tianjin port and to northern Chinese paper, polymer and non-ferrous processing hubs. The catalogue sits across several distinct HS code families rather than a single commodity chapter. Newsprint paper falls under HS chapter 48 (paper and paperboard), polyolefins and styrenics under HS chapter 39 (plastics and articles thereof), polyester fibre and FDY under HS chapter 54 (man-made filaments), and copper scrap and aluminium ingot under HS chapter 74 (copper) and HS chapter 76 (aluminium) respectively. For a buyer, this means the supplier's 8 listings touch at least four customs chapters and four different commodity inspection regimes, which is relevant for documentation, packaging norms and pre-shipment testing. The breadth of categories also signals that order consolidation, container mix and document sets will need to be planned product by product rather than under a single specification.

Product Range and Specialties of Beijing Bairongfu Co., Ltd.

The actual catalogue covers newsprint paper, HDPE plastic, polyester fibre, full draw yarn (FDY), HDPE/LDPE/LLDPE polyolefin blends, HIPS/GPPS styrenics, copper scrap, and aluminium ingot. Newsprint is typically traded in reels of 45-55 gsm basis weight, with ISO brightness in the 55-65% range, and is packed in waterproof wrapping on standard cores; buyers usually specify reel width, diameter and moisture content below 8%. Polyolefins (HDPE, LDPE, LLDPE) are sold by grade with melt flow index (MFI, g/10 min), density (g/cm³), and end-use application (film, blow moulding, injection). HIPS and GPPS grades are specified by impact strength (kJ/m²), melt flow rate and Vicat softening temperature, and are typically supplied in 25 kg bags or 1 MT jumbo bags on pallets. Polyester fibre and FDY (fully drawn yarn) are filament products specified by denier per filament (DPF), filament count, tenacity (cN/dtex, typically 3.5-5.5 for textile FDY), elongation (%) and lustre (bright, semi-dull, dull). Copper scrap is classified under ISRI codes such as Berry/Candy (bare bright copper wire, Cu 99%+) or Birch/Cliff (No. 2 copper, Cu 94-96%), with moisture and contamination limits set per shipment. Aluminium ingot is typically traded to P1020A specification (Al 99.7% min) with controlled Fe, Si and Cu impurities, supplied in 20-25 kg ingots strapped into 1 MT bundles. Across all eight listings, buyers should expect to negotiate product-specific specs rather than accept generic grade descriptions.

Trade and Export Information - Beijing Bairongfu Co., Ltd.

China is the world's largest exporter of plastic raw materials, man-made filaments and refined non-ferrous metals, and a major exporter of paper and paperboard. Buyers of newsprint from China are typically printing publishers and converters in Africa, South Asia, the Middle East and parts of Latin America, where domestic newsprint capacity is limited. Polyolefin and styrenic resin buyers include film converters, injection moulders and pipe extruders across Southeast Asia, the Middle East, Africa and South America, with typical purchase volumes in 20 ft FCL (around 18-20 MT for pellets) or 40 ft FCL (around 25-26 MT). Polyester fibre and FDY are widely shipped to fabric mills in Turkey, Vietnam, Bangladesh, Indonesia, Egypt and Mexico, where they feed knitting, weaving and non-woven lines. For these product families, buyers commonly require documents such as a Certificate of Analysis (COA), Material Safety Data Sheet (MSDS) for plastics, a pre-shipment inspection report (SGS, BV, Intertek or CCIC), a Certificate of Origin (FORM E for ASEAN, FORM A for GSP, or RCEP origin depending on destination), and a commercial invoice packing list. Copper scrap shipments often require a radiation certificate and ISRI classification on the packing list, and may be subject to destination-country import licensing (for example, under India's DGFT policy or China's own import licensing on certain scrap categories). Aluminium ingot exports to LME-relevant destinations may need to reference P1020A or equivalent ASTM/ISO grade standards. Standard Incoterms for these bulk industrial inputs are FOB, CFR and CIF, with 20 ft and 40 ft container loads being the norm for plastics and paper, and break-bulk or container loads for heavier metal shipments. Origin-country export context for Beijing-based suppliers typically routes through Tianjin or Qingdao ports for sea freight.

Sourcing from Beijing Bairongfu Co., Ltd. - Buyer Guidance

Buyers sourcing from Beijing Bairongfu Co., Ltd. should request a product-specific COA and MSDS for each of the 8 listed items, since each category carries its own test parameters: ISO brightness and moisture for newsprint, MFI and density for polyolefins, impact and Vicat for styrenics, tenacity and elongation for FDY, and elemental assay for copper scrap and aluminium ingot. It is standard practice to ask for a recent third-party pre-shipment inspection (SGS, BV, Intertek) report dated within the shipment window, and to confirm the ISRI code for copper scrap or the P1020A grade for aluminium ingot in writing. For plastics, confirming the grade name and intended application (film grade, blow moulding grade, injection grade) on the proforma invoice helps avoid grade substitution, a known risk in polyolefin trading. Before issuing a purchase order, buyers should verify the supplier's business licence scope covers the categories ordered (paper, plastics, textiles, metals each require separate licensing in some jurisdictions), and confirm export rights for restricted categories such as copper scrap. A pre-shipment sample of 1-5 kg per lot is typical for plastics and fibres, and a sealed assay sample for metals. Lead times for mixed-category orders from China generally run 15-30 days for ex-stock resins and metals, and 30-45 days for produced-to-order FDY or specific newsprint reels. Payment terms in this segment are usually 30% T/T deposit with 70% balance against copy of B/L, or L/C at sight for larger container volumes; LC at sight is advisable for first transactions. A supplier's responsiveness on documentation requests and willingness to accept third-party inspection are practical signals of operational capacity.

What product categories does Beijing Bairongfu Co., Ltd. list?

The catalogue contains 8 products across 5 categories: newsprint paper, plastic raw materials (HDPE, LDPE, LLDPE, HIPS, GPPS), polyester fibre and FDY filament yarn, plus copper scrap and aluminium ingot. Each category falls under a different HS code chapter, so documentation and inspection are handled per product.

Which HS codes apply to the listed products?

Newsprint falls under HS chapter 48, polyolefins and styrenic resins under HS chapter 39, polyester fibre and FDY under HS chapter 54, copper scrap under HS chapter 74, and aluminium ingot under HS chapter 76. The exact 6-digit subheading depends on the specific grade and form, which should be confirmed on the commercial invoice.

What documents should I request before ordering?

Request a Certificate of Analysis (COA) and MSDS for plastics, an ISRI classification for copper scrap, a P1020A or equivalent grade statement for aluminium ingot, a pre-shipment inspection report from SGS/BV/Intertek, and a Certificate of Origin. A proforma invoice naming the grade, application and spec sheet should be confirmed in writing before any deposit is paid.

What are typical specifications for the polyolefins and styrenics listed?

HDPE, LDPE and LLDPE are specified by melt flow index (g/10 min), density (g/cm³) and end-use (film, blow moulding, injection). HIPS and GPPS grades are specified by impact strength (kJ/m²), melt flow rate and Vicat softening temperature. Confirm the grade name and target application on the proforma to avoid substitution.

What should I know about the copper scrap and aluminium ingot listings?

Copper scrap is traded under ISRI codes such as Berry/Candy (Cu 99%+) or Birch/Cliff (Cu 94-96%), with moisture and contamination limits per shipment. Aluminium ingot is typically P1020A grade (Al 99.7% min) with controlled Fe, Si and Cu impurities, supplied in 20-25 kg ingots strapped into 1 MT bundles.

What is the typical MOQ and container load for these products?

For plastic resins, a 20 ft FCL holds roughly 18-20 MT of pellets and a 40 ft FCL around 25-26 MT. FDY and polyester fibre are usually shipped by the tonne on pallets. Copper scrap and aluminium ingot are sold by the metric tonne, often in 20 ft containers or break-bulk depending on weight. Specific MOQ should be confirmed per product.

What are typical lead times for orders from Beijing?

Ex-stock resins, paper and metals typically ship 15-30 days after order confirmation. Produced-to-order items such as specific FDY deniers or custom newsprint reels usually require 30-45 days. Sea freight from northern China commonly routes via Tianjin or Qingdao ports.

Which regions typically import these goods from China?

Newsprint is widely shipped to Africa, South Asia, the Middle East and Latin America. Polyolefins and styrenics go to converters in Southeast Asia, the Middle East, Africa and South America. Polyester fibre and FDY feed fabric mills in Turkey, Vietnam, Bangladesh, Indonesia, Egypt and Mexico. Copper scrap and aluminium ingot flow to smelters and re-rollers across Asia and the Middle East.