About Atlantic Exim - Multi-Category Supplier in India

Atlantic Exim is based in India and currently lists 36 active products across several industrial sectors. The catalogue includes items ranging from metal fasteners and stainless steel wire to heavy‑weight electrical equipment such as transformers and generators. Raw material commodities such as chrome concentrate, manganese ore and metallurgical coal also appear in the offering. Each product entry is linked to an HS code that places it within the relevant customs tariff chapter. The supplier is classified in the platform’s “harbor” trust tier, indicating a moderate level of verified activity.

Fastener items such as threaded bars, bolts (HS 7318.15) and stainless steel wires (HS 7223.00) are described with material grades like SS 304/316 and carbon steel grade 8.8. Electrical hardware includes medium‑voltage panels, unitized sub‑stations (HS 8504.23) and a range of DC, low‑voltage and medium‑voltage motors. Power conversion equipment comprises cast resin, power and general transformers, all grouped under the HS 8504 series. Energy solutions feature solar water pumps rated from 1 hp to 5 hp (AC/DC) and rooftop solar systems. Steel products such as hot‑rolled coil (HS 7219.11) and billets (HS 7207.12) are listed alongside stainless steel rods (HS 7222.20). Mineral commodities include chrome concentrate (HS 2610.00) with Cr₂O₃ 40‑42 %, ROM chrome ore at 38 % Cr₂O₃, manganese ore concentrate at 38.58 % Mn (HS 2602.00) and low‑ash metallurgical coke.

Product Range and Specialties of Atlantic Exim

The fastener portfolio comprises threaded bars, nuts, washers and bolts that conform to standard dimensions defined in ISO 898‑1 and ASTM A193 for grade 8.8 bolts. Stainless‑steel wire offerings (HS 7223.00) are typically supplied in diameters from 0.5 mm to 6 mm and meet ASTM A193/A194 specifications for grades 304 and 316. Steel billets (HS 7207.12) and hot‑rolled coil (HS 7219.11) are commonly delivered in 10 mm to 250 mm cross‑sections and comply with EN 10025 or ASTM A36 chemical limits, with the 304 stainless coil containing roughly 18 % Cr and 8 % Ni. The stainless‑steel rod range (HS 7222.20) includes austenitic, martensitic and ferritic grades, each with defined tensile strengths and corrosion‑resistance classes used in automotive and construction applications. Electrical equipment such as medium‑voltage panels, unitized sub‑stations (HS 8504.23) and transformers follow IEC 60076 and IEC 61439 standards, with typical ratings from 11 kV to 33 kV and power capacities up to 250 MVA. Solar water pumps (1‑5 hp) are built to IEC 60335‑2‑30 safety standards and often feature IP55 protection, while XLPE insulated power cables (commonly rated 1 kV to 33 kV) adhere to IEC 60502‑1 and are supplied in 25 mm² to 400 mm² conductor sizes. Mineral products such as chrome concentrate (HS 2610.00) are graded by Cr₂O₃ content (40‑42 %), manganese ore concentrate (HS 2602.00) by Mn percentage (≈38.5 %), and low‑ash coke by calorific value (typically 7 500 kcal/kg) and ash content below 5 %.

Trade and Export Information - Atlantic Exim

India exports a broad spectrum of industrial metals, electrical equipment and mineral commodities, with major destinations in the Middle East, Africa, Southeast Asia and Europe. HS 7318.15 fasteners and HS 7223.00 stainless wires are routinely shipped in 20‑ft containers or bulk bags, often under FOB or CIF terms, and buyers frequently request SGS or Bureau Veritas inspection certificates to verify material grade and dimensions. Electrical transformers and sub‑stations (HS 8504 series) are subject to IEC type testing and may require CE marking for EU markets; freight is typically arranged as containerised cargo with protective crating to prevent mechanical damage. Steel billets and hot‑rolled coils (HS 7207, 7219) are exported in bundled coils or bundled billets, with standard coating or mill‑finish specifications, and customs documentation includes a commercial invoice, packing list and certificate of origin. Mineral exports such as chrome concentrate and manganese ore are governed by the International Maritime Organization’s MARPOL regulations for bulk cargoes, and buyers often ask for assay reports, moisture content and impurity analyses before contract finalisation.

Sourcing from Atlantic Exim - Buyer Guidance

When sourcing fasteners or stainless‑steel wire from Atlantic Exim, request mill test certificates that detail chemical composition, tensile strength and hardness in accordance with ISO 898‑1 or ASTM A193. For transformers, sub‑stations and power cables, obtain IEC type test reports, CE declarations of conformity and, where applicable, third‑party inspection reports confirming voltage class, insulation resistance and dielectric strength. Commodity purchases such as chrome concentrate, manganese ore and coke should be accompanied by assay certificates, calorific value tests and moisture/ash analysis to ensure the grade matches contractual specifications. Verify the HS codes on the commercial invoice match the product descriptions to avoid customs delays, and confirm the packaging - e.g., steel drums for liquids, wooden crates for panels, or bulk sacks for powders - meets the handling requirements of the destination port. Prior to placing a large order, consider requesting a sample batch and a pre‑shipment inspection to validate dimensions, material grade and compliance with any required certifications.

What material grades are offered for the bolts listed under HS 7318.15?

The bolts are supplied in stainless steel 304 or carbon steel grade 8.8, matching the specifications of ISO 898‑1 and ASTM A193. The mill test certificate will show the exact chemical composition and tensile strength.

Which standards apply to the XLPE insulated power cables?

XLPE power cables typically comply with IEC 60502‑1 and are rated for 1 kV to 33 kV. Buyers should request a test report showing conductor size, voltage rating, insulation resistance and fire performance (IEC 60332).

How are the stainless‑steel wires (HS 7223.00) packaged for export?

Stainless‑steel wires are usually coiled and placed in wooden crates or steel drums, with each crate sealed and labeled with the grade (304 or 316) and diameter range. Packing lists and weight certificates accompany the shipment.

What documentation is needed for chrome concentrate (HS 2610.00)?

Buyers should ask for an assay certificate indicating Cr₂O₃ content (40‑42 %), moisture level, and any impurity percentages. A certificate of origin and a SGS inspection report are commonly required for customs clearance.

Are there typical minimum order quantities for the steel billets (HS 7207.12)?

Steel billets are often sold in bulk, with minimum orders ranging from 5 tonnes to 20 tonnes depending on the grade. The exact MOQ should be confirmed in the commercial quotation.

What certifications are commonly required for the transformers listed under HS 8504.23?

Transformers exported from India usually need IEC 60076 type test reports, CE marking for EU markets, and a third‑party inspection certificate such as SGS or Bureau Veritas. Request these documents before finalising the contract.

Can I obtain a sample of the solar water pump before placing a large order?

Suppliers typically provide a functional sample of the 1 hp or 5 hp solar water pump with full specifications, including pump curve, IP rating and power consumption. Request a sample together with the product data sheet and safety certification (IEC 60335‑2‑30).

What are the common lead times for the medium‑voltage panels?

Lead times for medium‑voltage panels usually range from 30 to 60 days after receipt of a confirmed order, depending on the required voltage class and any custom wiring or enclosure specifications. Confirm the exact schedule in the production plan.