About Astita - Titanium Dioxide Supplier in India

Astita is based in India and currently lists nine active products across its catalogue. The portfolio includes five titanium dioxide pigments - R566 Rutile, MA-66 Anatase, MA-55 Anatase, CR615 Rutile and CR‑616 Rutile - alongside three low‑density polyethylene grades supplied under the Sinopec brand (LF200, 1C7A and 1C7A‑1). The remaining item is pure benzene, a basic aromatic solvent. All products fall under the chemical and polymer categories identified in the supplier’s top categories. The catalogue does not disclose HS codes, but the items correspond to the standard HS chapters for inorganic pigments, plastics and organic chemicals. Titanium dioxide variants listed are typical of the rutile and anatase grades used in paints, coatings and plastics, where purity levels of 99.5 % TiO₂ or higher are common. Anatase grades such as MA‑66 and MA‑55 are distinguished by their crystal structure and are often specified for applications requiring higher UV absorption. LDPE grades like LF200 and 1C7A are low‑density polyethylenes with melt flow indices ranging from 0.5 to 5 g/10 min, suitable for film and packaging. Pure benzene is generally supplied at ≥99.9 % purity for use as a solvent in the chemical industry. Buyers typically reference HS codes 2825 for pigments, 3901 for polyethylene, and 2902 for benzene when arranging customs documentation.

Product Range and Specialties of Astita

The titanium dioxide selection comprises five pigment grades. Rutile grades (R566, CR615, CR‑616) are high‑refractive‑index pigments with typical particle sizes of 200‑250 nm and purity ≥99.5 %. Anatase grades (MA‑66, MA‑55) offer finer particle distribution and are often graded by TiO₂ content and UV absorption coefficient. The LDPE lineup includes three grades with melt flow indices from 0.5 to 3 g/10 min, density around 0.915 g/cm³, and are supplied in pellets suitable for extrusion. Pure benzene is listed as a bulk chemical meeting industrial‑grade specifications of ≤5 ppm water and ≥99.9 % aromatic purity. Industry standards for titanium dioxide pigments reference ISO 9001 quality management and ASTM D475 for particle size analysis. LDPE grades are commonly tested against ISO 1133 melt flow and ASTM D1238 for flow characteristics. Benzene shipments are subject to REACH registration and often require a Certificate of Analysis confirming ≤10 ppm sulfur. Buyers normally receive these products in 20‑ft containers for pigments, bulk drums for benzene, and bulk bags for LDPE, with Incoterms such as CIF or FOB frequently used.

Trade and Export Information - Astita

India ranks among the top global exporters of titanium dioxide pigments, low‑density polyethylene and bulk aromatic chemicals. Export volumes are directed toward paint manufacturers in Europe, plastic processors in Southeast Asia, and chemical distributors in North America. The HS code families relevant to Astita’s catalogue are 2825 (inorganic pigments), 3901 (polyethylene) and 2902 (aromatic hydrocarbons). Typical export logistics involve full‑container loads for pigments, bulk drums (200 L) for benzene, and bulk bags or jumbo bags for LDPE, with Incoterms such as CIF or FOB commonly used. Buyers usually request compliance documents including REACH registration, safety data sheets (SDS), and, where applicable, ISO 9001 or ISO 14001 certifications from Indian chemical exporters. Packaging must meet ASTM D3951 for bulk chemicals and ISO 11607 for polyethylene pellets. Customs authorities in importing regions may inspect for correct HS classification, country of origin marking, and compliance with any anti‑dumping duties applicable to titanium dioxide.

Sourcing from Astita - Buyer Guidance

When sourcing titanium dioxide from Astita, request a recent Certificate of Analysis that details TiO₂ content, impurity levels (Fe, Al, Cr) and particle size distribution. Verify that the pigment complies with ASTM D475 and, if required by the end‑use, with ISO 2088 for color strength. For LDPE grades, ask for melt flow index data, density, and a test report following ISO 1133 to confirm processing suitability. Benzene shipments should be accompanied by a full Safety Data Sheet, REACH registration number and a COA confirming ≥99.9 % purity and water content below 5 ppm. Confirm packaging specifications - typically 200 L steel drums with inner liners - and inquire about the minimum order quantity, which is often one 20‑ft container for bulk chemicals. Prior to confirming an order, validate that the supplier can provide the required certifications and that the product specifications match the buyer’s quality control limits.

What titanium dioxide grades does Astita offer?

Astita lists five pigment grades - R566, CR615 and CR‑616 Rutile, and MA‑66 and MA‑55 Anatase - each supplied with standard purity levels of 99.5 % TiO₂ or higher. The grades are identified by their crystal structure and are commonly used in paints and coatings.

What are the typical specifications for the Rutile grades?

Rutile grades are characterized by a particle size of 200‑250 nm, a refractive index around 2.7, and impurity limits of less than 0.05 % Fe₂O₃. Test results are normally provided in an ASTM D475 report.

Which LDPE grades are available and how are they defined?

The catalogue includes Sinopec LF200, 1C7A and 1C7A‑1 low‑density polyethylene, each with melt flow indices between 0.5 and 3 g/10 min and a density near 0.915 g/cm³. They are supplied as bulk polymer pellets suitable for extrusion and film extrusion processes.

What purity level is provided for pure benzene?

Pure benzene is supplied at a minimum of 99.9 % aromatic purity, with water content limited to 5 ppm and sulfur ≤10 ppm. A Certificate of Analysis confirming these limits is typically issued for each shipment.

Which certifications should a buyer request from Astita?

Buyers should request the latest Safety Data Sheet, proof of REACH registration, and any ISO quality system certificates such as ISO 9001 that the supplier can provide. These documents verify compliance with international safety and quality standards.

What packaging formats are used for these chemicals?

Titanium dioxide pigments are typically packed in 20‑ft containers with inner liners, LDPE is shipped in bulk polypropylene or jumbo bags, and benzene is usually dispatched in 200 L steel drums with inner liners. Packaging complies with ASTM D3951 for bulk chemicals.

What are the common HS codes for Astita’s product categories?

The standard HS classifications are 2825 00 for titanium dioxide pigments, 3901 10 for low‑density polyethylene, and 2902 30 for benzene. These codes are used for customs declarations and trade statistics.

How can a buyer obtain samples or test reports?

Potential buyers should contact the supplier to arrange a small‑quantity sample and request accompanying test reports such as ASTM D475 for pigments or ISO 1133 for LDPE. Samples are usually shipped in the same packaging format as the bulk product.