About Ar Mines Industries - Industrial Chemicals Supplier in India

India hosts Ar Mines Industries, a supplier that currently lists nine distinct products across industrial chemicals, quartz, sulphur, gum resin, food additives and sodium silicate. The catalogue includes Quartz Powder (HS 2506.10) with silicon dioxide purity of 98‑99.5 %, Diammonium Phosphate Hydrogen, Sulphur Powder, Potassium Dichromate, Gum Rosin, Electrolytic Manganese Dioxide Powder (HS 2820.10, battery grade MnO₂), Crushed Gelatine Capsules scrap, Natural Manganese Dioxide Powder (HS 2820.10, pyrolusite mineral) and Sodium Silicate Solution. Each entry is identified by material description where supplied, and the HS code aligns with the relevant customs tariff headings for minerals and chemical products. The supplier’s active product count of nine reflects a focused portfolio rather than a broad commodity range.

The listed items fall under HS chapters 25 (salt, sulphur, etc.) and 28 (inorganic chemicals). Quartz Powder is classified under 2506.10, which covers natural quartz and silica sand for industrial use. Both manganese dioxide powders share HS 2820.10, the tariff for manganese oxides and peroxides used in batteries and pigments. The remaining chemicals such as Potassium Dichromate and Diammonium Phosphate Hydrogen are typical inorganic additives employed in metal treatment, fertilizer and food processing sectors. No additional product specifications such as particle size distribution or solution concentration are provided in the catalogue, so buyers should request detailed technical data for each material.

Product Range and Specialties of Ar Mines Industries

Ar Mines Industries lists quartz powder with 98‑99.5 % SiO₂ purity; in the quartz market, grades are often expressed by purity and median particle size, with industrial grades ranging from 98 % to 99.9 % and typical particle sizes of 10‑100 µm. Sulphur powder is commonly supplied as fine granules with moisture below 0.5 % and particle size 100‑300 µm for agro‑chemical formulations. Potassium Dichromate is generally offered as 99 % pure crystals, used as an oxidising agent in metal finishing. The two manganese dioxide powders are differentiated by production method: electrolytic MnO₂ typically meets battery‑grade specifications of ≥99 % purity and low moisture, while natural MnO₂ (pyrolusite) may have broader impurity ranges but is valued for pigment applications. Gum Rosin is a natural resin with an acid value around 150‑200 mg KOH/g, used in adhesives and printing inks. Sodium Silicate Solution is sold as a water‑glass with a SiO₂/Na₂O ratio commonly between 2.0 and 3.5 and a pH above 12.

Trade and Export Information - Ar Mines Industries

India is a major exporter of inorganic chemicals and mineral powders, with quartz, manganese oxides and sulphur routinely shipped to Southeast Asia, the Middle East and Europe. HS 2506.10 and 2820.10 products are subject to standard customs documentation, including a commercial invoice, packing list, Certificate of Origin and, where required, a Material Safety Data Sheet (MSDS). Importing countries often request compliance with REACH (EU) or TSCA (US) for chemical substances, and ISO‑9001 quality‑management certification is a common prerequisite for bulk chemical contracts.

Logistically, bulk powders are typically packed in polypropylene bulk bags (1 ton) or intermediate bulk containers, while liquid sodium silicate solution is shipped in IBC totes or 20‑ft drums. Freight terms such as CIF or FOB are standard, and container loading rates average 20‑ft containers for 20‑ton bulk powder or 40‑ft containers for liquid solutions. Export licences for certain oxidising agents like Potassium Dichromate may be required under Indian export control regulations, and buyers should verify applicable import permits in the destination country.

Sourcing from Ar Mines Industries - Buyer Guidance

Buyers sourcing quartz powder should request a Certificate of Analysis confirming SiO₂ purity, particle‑size distribution and moisture content, and compare the values against industry benchmarks of ≥98 % purity for industrial use. For manganese dioxide powders, request both a COA and an electrochemical performance report if the intended application is battery manufacturing, as well as an MSDS to assess handling requirements.

Sulphur powder buyers typically ask for moisture and ash‑content analysis, while Potassium Dichromate purchasers should obtain purity certificates and confirm that the product complies with hazardous‑material transport regulations. Samples of gum rosin and sodium silicate solution can be requested in small quantities to evaluate acid value or SiO₂/Na₂O ratio before committing to bulk orders. Prior to ordering, verify the supplier’s export licences for controlled chemicals and ensure that packaging meets the buyer’s storage and safety standards.

What is the purity range of the Quartz Powder offered by Ar Mines Industries?

The catalogue states a silicon dioxide purity of 98‑99.5 %. Buyers should obtain a Certificate of Analysis to confirm the exact purity and particle‑size distribution for their application.

Which HS code applies to the Quartz Powder?

Quartz Powder is classified under HS code 2506.10, covering natural quartz and silica sand used in industrial processes.

What forms of manganese dioxide does the supplier provide?

Two forms are listed: Electrolytic Manganese Dioxide Powder (battery grade) and Natural Manganese Dioxide Powder (pyrolusite). Both are recorded under HS code 2820.10.

What documentation is typically required for exporting Sulphur Powder from India?

Standard documents include a commercial invoice, packing list, Certificate of Origin, MSDS, and, where applicable, an export licence for sulfur compounds.

What are common packaging options for Sodium Silicate Solution?

Liquid sodium silicate is usually shipped in IBC totes, 20‑ft drums or bulk containers, sealed to prevent leakage and labeled with safety information.

What lead time can buyers expect for Electrolytic Manganese Dioxide Powder?

Lead times for electrolytic MnO₂ typically range from 4 to 6 weeks, depending on order size and the need for quality‑assurance testing.

Which certifications should buyers request when purchasing industrial chemicals from India?

Buyers should ask for ISO‑9001 compliance, a current Certificate of Analysis, MSDS, and, for regulated substances, evidence of REACH or TSCA conformity as appropriate.