About Anping Xinghong Metal Wire Mesh Co., Ltd. - Wire Mesh Supplier in China

Anping Xinghong Metal Wire Mesh Co., Ltd. is based in China and currently lists eight distinct products in its catalogue. The company’s offerings fall under wire mesh, fencing materials and industrial nets, covering welded mesh, hexagonal mesh, rockfall protection mesh, galvanised mesh, welded panels, barbed wire, 358 fence and side slope protection net. Each product aligns with standard steel wire mesh families used in construction, agriculture and safety applications. The catalogue does not provide HS codes, but the items correspond to HS chapter 73 (iron or steel wire) typical for such goods. The supplier is classified in the harbor trust tier, indicating a moderate level of verification on the platform.

The 358 Fence Welded Mesh and Galvanised Welded Mesh are welded steel wire panels commonly used for security fencing. Hexagonal Wire Mesh is a diamond‑shaped mesh often specified for filtration or decorative screens. High Tensile Rockfall Mesh is engineered for slope stabilization with tensile strengths exceeding 300 MPa. Razor Blade Barbed Wire and standard 358 Fence serve perimeter security, while Side Slope Protection Net is used in civil engineering for erosion control. The range reflects typical product families that buyers source for infrastructure, mining, and agricultural projects.

Product Range and Specialties of Anping Xinghong Metal Wire Mesh Co., Ltd.

The catalogue lists eight products, including welded mesh panels, hexagonal mesh, rockfall mesh, galvanised mesh, barbed wire and slope protection net. In the wire mesh industry, welded meshes are commonly produced from carbon steel with tensile strengths ranging from 250 MPa to 350 MPa, and are often coated with zinc (galvanised) to achieve a corrosion resistance of 10 - 20 years in outdoor environments. Hexagonal meshes are typically supplied in gauges from 6 mm to 12 mm wire diameter, with openings between 30 mm and 100 mm, meeting standards such as EN 10223 for welded wire cloth. Rockfall protection meshes are graded by tensile strength and impact energy, with specifications like 300 MPa minimum tensile and 0.8 mm wire diameter for high‑slope applications. Barbed wire variants are defined by barb spacing (e.g., 25 mm) and wire gauge, aligning with EN 13187 for security fencing. Side slope protection nets are usually woven from high‑strength steel, conforming to ISO 12944 for corrosion protection in civil engineering.

Typical packaging for these steel mesh products includes shrink‑wrapped bundles on wooden pallets, sized to fit 20‑ft or 40‑ft containers. Buyers often request material test certificates (MTC) confirming chemical composition, tensile test reports, and coating thickness measurements. For industrial nets, ISO 9001 quality management certification is frequently required by importers to ensure consistent production processes.

Trade and Export Information - Anping Xinghong Metal Wire Mesh Co., Ltd.

China is a major exporter of steel wire mesh and fencing products, with shipments primarily destined for Southeast Asia, the Middle East, Africa and Latin America where infrastructure development drives demand. The products fall under HS Chapter 73, particularly sub‑headings 7308 (structures of iron or steel) and 7315 (wire of iron or steel). Importers in these regions often require conformity to CE marking for EU markets, as well as compliance with ASTM A108 for steel wire and ISO 12944 for corrosion resistance. Standard Incoterms such as FOB Shenzhen or CIF destination port are used, and container loading is optimized to 20‑ft containers holding approximately 18 metric tonnes of welded mesh panels.

Chinese exporters of wire mesh usually provide a certificate of origin for preferential tariff treatment under various free‑trade agreements and may need a third‑party inspection certificate from agencies such as SGS or Bureau Veritas. Buyers should verify that the mesh meets local building code references, such as the US ASTM A123 for galvanised coatings or the Indian IS 2060 for welded wire mesh. Documentation typically includes a commercial invoice, packing list, bill of lading and, where required, an inspection report.

Sourcing from Anping Xinghong Metal Wire Mesh Co., Ltd. - Buyer Guidance

When sourcing from Anping Xinghong, buyers should request the material test certificate, tensile strength report and coating thickness data for each mesh type to confirm compliance with project specifications. Sample pieces of welded mesh or barbed wire are typically supplied in 1 kg batches, allowing verification of gauge, opening size and finish before full order placement. Verify that the supplier can provide ISO 9001 or equivalent quality management documentation, as this is a common prerequisite for large‑scale construction contracts.

Typical minimum order quantities for welded mesh panels range from 500 kg to 1 tonne, while barbed wire and protection nets may be ordered in 200 kg increments. Lead times in China for steel mesh products are usually 25 - 35 working days after receipt of a pro‑forma invoice, subject to steel mill supply conditions. Products are packed in wooden crates or shrink‑wrapped bundles on pallets, with dimensions designed to maximize space in 20‑ft or 40‑ft containers, and are shipped under FOB or CIF terms as agreed.

What wire mesh products does Anping Xinghong list in its catalogue?

The catalogue includes 358 Fence Welded Mesh, Hexagonal Wire Mesh, High Tensile Rockfall Mesh, Galvanised Welded Mesh, Welded Wire Mesh Panels, Razor Blade Barbed Wire, 358 Fence and Side Slope Protection Net, totaling eight distinct items.

Which HS code chapter is most relevant for the supplier’s products?

The products correspond to HS Chapter 73, which covers iron or steel wire and related structures, commonly used for welded mesh, wire and related fencing items.

What material specifications should a buyer verify for the welded mesh panels?

Buyers should confirm the steel grade (typically carbon steel), tensile strength (250 - 350 MPa), wire diameter, and zinc coating thickness if galvanised, supported by a material test certificate.

Are there typical certifications that importers request for these steel mesh products?

Importers frequently request ISO 9001 for quality management, CE marking for EU shipments, and product‑specific certificates such as ASTM A108 for steel wire or ISO 12944 for corrosion protection.

What is a common packaging method for the mesh and net products?

Products are usually shrink‑wrapped in bundles and placed on standard wooden pallets, allowing efficient loading into 20‑ft or 40‑ft containers.

What lead time can a buyer expect for an order from this supplier?

Lead times are typically 25 to 35 working days after the pro‑forma invoice is cleared, depending on steel mill availability and order size.

How should a buyer request a sample before placing a full order?

Buyers can ask for a 1 kg sample of the specific mesh type, which the supplier will ship in a small parcel; the sample should be inspected for wire gauge, mesh opening, and coating quality before confirming the order.